Professional Documents
Culture Documents
In Partnership with:
RTP: CB:
COURSE SUMMARY:
This course cover the basic principles of protection in explosive atmospheres of plant and machinery outlined in IECEx 60079
series and OD 504.
The explosion-protection aspects of conducting initial, periodic and sample audit inspections of explosion-protected
equipment and installations.
Explosion-protection aspects for installing explosion-protected and associated equipment and wiring systems.
The explosion-protection aspects for maintaining explosion-protected and associated equipment and wiring systems including
plant maintenance schemes.
Testing electrical installations for explosive atmospheres.
This Unit of Competence covers evaluating the completeness of a hazardous area verification dossier and compliance of the
explosion-protected aspects of the electrical installations within the constraints of a visual or close inspection.
PREREQUISITES:
Competence in this unit requires a degree, diploma or equivalent in a technical subject such as College Certificates and Trade
Credentials.
For an operative a minimum 3 years’ experience in general electrical installation practice.
For a responsible person a minimum 3 years’ experience in Hazardous Area installation practice.
ELIGIBLE CANDIDATES:
Electrical technicians/tradesman working in or associated with Explosive Atmospheres (Hazardous Areas)
COURSE CONTENT
DAY 1 Insulation resistance testing
Examples of Hazardous Areas Fault loop impedance testing
Properties of Flammable Materials Motor testing
Acts and Regulations & Standards Transformer testing
Hazardous Areas Legislative Requirements Perform visual, close & detailed inspections
Hazardous Area Working Methods
Working in a Hazardous Area DAY 4
Hazardous Area Dossiers (HAD) Types of inspections
Ex markings & Certification Grades of inspections
Equipment for inspections
DAY 2 Information for inspections
Selection of Equipment Inspections sheets (How to complete)
Selection of Wiring System Reviewing calculations
Protection Techniques Practical examples
Ex 001 - Selected Response Assessment
Ex 001 - Constructed Response Assessment DAY 5
Safe working in hazardous area requirements Ex 003 & 006 – Selected response Assessment
Hot work permits Ex 003 & 006 – Practical Assessment
Lock out procedures Ex 004 007 & 008 – Selected response Assessment
IEC Standard for Earthing
DAY 6
DAY 3 Ex 004 007 & 008 – Constructed response Assessment
Installation testing Ex 004 007 & 008 – Practical Assessment
Earth testing
ASSESSMENT:
TRAINING VENUE:
Combination of written & practical
ATTS, SINGAPORE, No. 3 Buroh Street
JTC Space One @ Buroh, Singapore 627566
CERTIFICATION:
IECEx CoPC – Certification of Competency issued by CONTACT DETAILS:
SEEG, AUSTRALIA Email : enquiry@atts-asia.com
*Each certification will be charged separately Tel : (65) 6265 2838