Professional Documents
Culture Documents
Catalogue
DCP was established in Doncaster UK, with presence in Europe and Asia for over 40 years. In 2009,
DCP acquired Ayla Construction Chemicals, which was one of the leading brands in construction
chemicals operating in Europe and Middle East. DCP now operates in Europe, North America, Middle
East and Asia and is one of the fastest growing construction chemicals companies worldwide.
DCCIPL’s corporate office is located in Bangalore in the southern state of Karnataka and has two
state-of-the-art manufacturing units at Chennai (Tamilnadu) and Jaipur (Rajasthan) to cater to the
different geographies of the country. The factories are equipped with quality control systems and
efficient manufacturing practices.
DCCIPL has R&D laboratories equipped with the latest and most advanced equipment for testing
and developing products through continuous innovation and research and providing products that
are able to perform in diverse climatic and application conditions and requirements.
All DCP products meet the highest relevant international standards and
DCCIPL is accredited with ISO 9001:2015 by M/s. Lloyd’s Register of
Quality Assurance.
DCCIPL has a team of technical and sales personnel present in various locations of India and are
supported by a team of trained associates in the form of distributors, dealers and applicators to
provide complete and cost-effective solutions for various project requirements of the construction
industry.
1
Company Profile
DCP Commitments
Expertise
DCP provides exceptional level of expertise and support services both at the office and
on site.
Quality
All products are produced to comply with the best relevant international standards.
Full Range
DCP offers a comprehensive range of products covering a wide range of civil and aesthetic
requirements of construction projects.
• Do everything reasonably practicable to prevent accidents, injuries and work related ill
health.
• Comply with, and where practical, exceed all applicable legislation, adopted codes of
practice and other requirements. Where none exist, set and adhere to stringent
standards based on DCP’s best practices.
• Actively involve and encourage all employees in the achievement of DCP’s
objectives.
• Appoint competent people to assist in meeting statutory duties including external HSE
performance.
Our commitment to the environment, low CO2 foot print and low dust emissions enables us to
operate production close to residential areas where the most stringent environmental regulations
exist. We commit unreservedly to this directive since these residential areas are our homes and
backyards.
Concrete Admixtures 4
Surface Treatments 12
Concrete Repair 17
Flooring Systems 20
Protective Coatings 27
Waterproofing 32
Adhesives 38
Structural Strengthening 42
3
Concrete
Admixtures
Indispensable components to modern
concrete production, for enhancing and
modifying vital concrete and cement
characteristics.
Recommended
Name Description Highlighted Uses Standards
Dosage
ASTM C494,
• Produce high quality concrete by improving durability and water
Type A 0.30 - 1.00
Water reducing tightness
Flocrete P8 BS 5075-1 litre/100 kg
admixture • Improves cohesion within concrete mixes
BS EN 934-2 of cement
• Reduces w/c ratio by 8-10%
IS 9103
ASTM C494,
Retarding and • Hot weather concreting and other applications where high 0.10 - 0.55
Type D,
Flocrete R666 water reducing workability retention and retardation are required litre/100 kg
BS 5075-1
admixture • For Roller Compacted Concrete (RCC) mixes of cement
IS 9103
High range
• Long distance and hot weather concrete deliveries
water reducing IS 9103:2007,
• Where high workability retention and retardation are of prime 0.4 - 1.5
admixture with Revision 1 &
Supaflo SPL44 importance litre/100 kg
workability ASTM C494,
• To produce high quality concrete of improved durability and of cement
retention Type G
water tightness
properties
5
Concrete
Admixtures
Recommended
Name Description Highlighted Uses Standards
Dosage
High performance
Supaflo PC460 concrete • High workability with good retention
hyperplasticiser • Structures with congested reinforcement
• Pre-cast concrete IS 9103:1999 0.40 - 1.60
• Improved cohesion allow for use in mass concrete pours and & ASTM C494, litre/100 kg
piling Type D & G of cement
High performance • Self compacting concrete
Supaflo PC450 concrete
hyperplasticiser
7
Concrete
Admixtures
Recommended
Name Description Highlighted Uses Standards
Dosage
Powder
waterproofing
Setcrete RMW • A waterproofing admixture for use in all cement based mortars, EN 934-2 0.50 kg/50 kg
admixture for
(Powder) screeds and concrete IS 2645 of cement
concrete and
mortar
High performance
permeability • More durable concrete, lower in permeability 1.00 - 2.30
EN 934-2
Flocrete W50 and absorption • Provides concrete protection throughout the concrete depth litre/100 kg
IS 2645
reducing • Chloride and bitumen free of cement
admixture
9
Concrete
Admixtures
Recommended
Name Description Highlighted Uses Standards
Dosage
200 grams/50 -
High performance 80 litres of water
• Remove blockage
priming agent for equals 100 - 150
Set Lube • Decrease friction in pipelines and pump
concrete pumps kg of cement
• Reduces blockage of flow by coagulation
and pipelines usually prepared
in site
1.10 Others
11
Surface
Treatments
To improve concrete surfaces, aiding in the
curing of concrete or facilitating its release
from formwork.
Recommended
Name Description Highlighted Uses Standards
Coverage Rate
Multipurpose, solvented
ASSHTO M148
resin based concrete
Setseal A ASTM C309, Type I, Class 2.5 - 4.5 m2/litre
curing compound and
A&B
hardener
13
Surface
Treatments
Recommended
Name Description Highlighted Uses Standards
Coverage Rate
2.3 Others
Recommended
Name Description Highlighted Uses Standards
Coverage Rate
Flo-Add 1
(227 gm)
OPC 50 kg 50 kg
Expansive and plasticising
Flo-Add 1 Sand 0 50 kg
grout admixture
Water 20 ± 2 22 ± 2
OPC 50 kg 50 kg
Hydrogen free expansive
Flo-Add 2 and plasticising grout Sand 0 50 kg
admixture
Water 21 ± 2 23 ± 2
15
Grouts &
Anchors
Recommended
Name Description Highlighted Uses Standards
Coverage Rate
Approximate Yield
Name Description Highlighted Uses
(Coverage)
• Filling cracks in both interior and exterior concrete, 0.54 litre/1 kg bag
masonry and plaster surfaces (1 kg will fill approximately
One component polymer modified
Cempatch KF • As a pore sealer and leveling skim coat mortar 30 - 40 m length of cracks
cementitious crack filling mortar
• To produce a uniform surface for subsequent paint cut into 6 mm deep
finish V-grooves)
Mortar consistency:
• Repair of all types of structural concrete elements
One component, shrinkage compensated, 12.50 litre/25 kg bag
Cempatch HM such as walls, columns, beams and floors
self-compacting, fast setting and free flowing
• Suitable for repair of steel congested areas
microconcrete Fluid consistency:
• Small volume concrete repairs
15.40 litre/25 kg bag
• Repair of all types of structural concrete where high 13.30 litre/28 kg pack
Two component, high build, polymer
Cempatch N strength and extremely low shrinkage properties are (1.33 m²/28 kg bag @ 10
modified cementitious repair mortar
required mm thickness)
• For the repair of vertical and overhead elements
• As a repair mortar for all structural elements in
One component, high strength, fibre buildings, water retaining structures, industrial plants,
Cempatch RF 13.00 litre/25 kg bag
reinforced cementitious repair mortar bridges, etc.
17
Concrete
Repair
Approximate Yield
Name Description Highlighted Uses
(Coverage)
19
Flooring
Systems
To enhance and protect new or existing
concrete floors. Ranges include screeds,
underlayments, coatings and toppings to
provide durability, longevity, performance and
decorative finishing.
Recommended
Name Description Highlighted Uses
Coverage Rate
Normal or medium
Dry shake quartz monolithic
• Parking areas duty floors:
concrete floor hardener that
• Warehouses 3.00 - 5.00 kg/m²
provides a non-metallic, non-
Monoshake • Workshops
oxidizing, dense and smooth
• Service stations Heavy duty floors:
surface with high abrasion and
• Aircraft hangars 5.00 - 7.00 kg/m²
wear resistance
• Heavy industries
• Power stations
Medium duty floors: 4.00 - 5.00
• Parking areas
kg/m²
• Warehouses
Dry shake metallic monolithic
Tibmix • Workshops
concrete floor hardener Heavy duty floors:
• Loading pays
6.00 - 7.00 kg/m²
• Service stations
• Aircraft hangars
• Parking areas
• Driveways
Dry shake monolithic concrete floor
• Warehouses
hardener for stamped concrete 3.00 - 5.00 kg/m² depending
• Sidewalks
Monotop that provides a dense and smooth on colour
• Walkways
surface with high abrasion and
• Patios
wear resistance
• Garden landscaping
• Pool decks
High solids “look enhancing” Ideal for for using internally and externally in the following
Concrete:
acrylic floor and wall sealer and applications:
8 - 12 m²/litre
curing compound that provides • Over decorative plasters and masonry surfaces
Monoseal
dustproofing, resistance to • Stamped concrete
Stamped Concrete:
penetration of oils and liquids and • Floors in light to medium duty trafficable areas
6 - 10 m²/litre
ease of clean
21
Flooring
Systems
Recommended
Name Description Highlighted Uses
Coverage Rate
Strongcoat Primer:
5 m²/kg
Flow-applied, 2 mm thick, epoxy
resin conductive floor with • Intended for static conductive flooring areas such as: Strongcoat Conductive
Strongcoat resistance between 5x10� and -- Electronic manufacturing facilities Basecoat:
Conductive 1x106 ohms that comprises of a -- Hospital operation theatres 4.50 m²/kg @ 2 mm thickness
primer, conductive base and a top -- Hazardous dust and chemical environments
coat Strongcoat Conductive Top
Coat:
3.40 kg/m² @ 2 mm thickness
Strongcoat Primer S:
Strongcoat SL1 5 m²/kg
(0.5 - 1.5 mm) Strongcoat SL1:
• Very durable topping for pedestrian & 10.6 m²/kit @ 1 mm thickness
vehicular traffic
• Resistant to many of the chemicals found in
Strongcoat Primer S:
an industrial environment
5 m²/kg
Strongcoat SL2 Solvent free, epoxy based self- • Applied in areas such as:
(1.5 - 3.0 mm) levelling topping that provides --Aircraft hangars
Strongcoat SL2:
floor surfaces with a seamless, --Hospitals
5.9 m²/kit @ 2 mm thickness
hygienic & appealing finish --Pharmaceutical factories
--Showrooms
--Laboratories
--Light industrial plants Strongcoat Primer S:
--Kitchens 5 m²/kg
Strongcoat SL4
(3.0 - 5.0 mm)
Strongcoat SL4:
3.75 m²/kit @ 4 mm thickness
23
Flooring
Systems
Recommended
Name Description Highlighted Uses
Coverage Rate
Strongcoat Primer:
Strongcoat 5 m²/kg @ 200 micron dry film thickness
Topping
(Above 5 mm) Strongcoat Topping:
• Heavy industry factories
Heavy duty trowel applied 2.85 m²/kit @ 5 mm thickness
• Paint workshops
epoxy based topping that
• Steel works
provides floor surfaces
• Dairies
with a seamless, hygienic
• Chemical factories
& cosmetically attractive
• Oil refineries Strongcoat Primer:
finish
Strongcoat • Freezers and refrigerated storage 5 m²/kg @ 200 micron dry film thickness
Topping T
(2 - 5 mm) Strongcoat Topping T:
4.75 m²/kit @ 3 mm thickness
• Hospitals
Strongcoat SLW100:
• Pharmaceutical factories
Water based 0.5 -2 mm 10.5 m2/kit @ 1 mm thickness
Strongcoat • Showrooms
self- leveling topping for
SLW100 • Laboratories
floor surfaces Strongcoat Primer:
• Light industrial plants
5 m2/kg
• Kitchens
Gripdeck Primecoat E:
0.25 – 0.30 kg/m2 per coat
• Designed for use in applications such as:
Gripdeck Flexible polyurethane -- Car park decks
Gripdeck P: 0.20 - 0.30 kg/m² per coat
PU100 System vehicle decking system -- Car park ramps and turning circles
-- Traffic aisles and parking bays
Antislip Aggregate and Gripdeck Aggregate:
3 - 4 kg/m2
Gripdeck Primecoat E:
0.25 - 0.30 kg/m² per coat
Wearcoat TG:
0.33 - 0.60 kg/m2 per coat
Wearcoat Plus:
Hard wearing, solvent free,
0.28 - 0.50 kg/m² per coat
flexible polyurethane coating
system primarily designed for
Gripdeck AJ Antislip Aggregates:
use in car parks with excellent
System 2 - 3 kg/m²
resistance to petrol, battery
acid, diesel, brake fluid, de-icing
Ramps and turning circles:
salts, etc.
Approx. 1.4 - 1.6 mm thickness
Smooth finish:
Approx. 500 - 600 microns
Gripdeck Flexcoat:
0.70 - 1.00 kg/m² per coat
Antislip Aggregates:
2 - 3 kg/m²
25
Flooring
Systems
Recommended
Name Description Highlighted Uses
Coverage Rate
Recommended
Name Description Highlighted Uses
Coverage Rate
As anticorrosive primer:
1.00 kg pack/50 kg steel bar of 12 mm
Two components polymer • For reinforcing:
diameter
based anticorrosive -- Bars
Repcoat 2C
coating for steel and -- Steel
As protective coating:
reinforcement -- Reinforced concrete
3.00 m²/kg @ 200 micron dry film
thickness
• Steel tanks
High performance 0.11 - 0.22 litre/m² per coat to achieve
• Chemical processing areas
Repcoat P polyurethane based a dry film thickness between 50 - 100
• Concrete walls and floors
protective coating microns
• Protective UV coating over wide range of epox systems
27
Protective
Coatings
Recommended
Name Description Highlighted Uses
Coverage Rate
29
Sealants &
Joints
Designed to allow for movement in joints,
while protecting structures from chemicals
and weathering elements such as water, wind
and sunlight while preserving the overall
aesthetic design.
Gun Grade:
ASTM C920, Type M, Class 25
• Potable water retaining structures, metal and
High performance BS 4254, BS 6920, BS EN ISO 11600 F 25 LM
Flexseal PS660 concrete sea walls, parapet wall joints, airport
polysulphide civil sealant
runways and aprons
Pouring Grade:
BS 5212 Type FB (includes types N & F)
31
Waterproofing
Recommended
Name Description Highlighted Uses Standard
Coverage
Water Byelaws
Two component elastomeric Scheme; WRc
acrylic cement modified DIN 1048: Resistance to
12.5 m²/23 kg @
Setseal B waterproof coating for water pressure @ 2 mm
1 mm thickness
internal and external Positive: > 7 bars
applications Negative: > 3 bars
Recommended
Name Description Highlighted Uses Standard
Coverage
8.3 Waterstops
33
Waterproofing
Recommended
Name Description Highlighted Uses Standard
Coverage
High performance
Hyperseal DP-2010H hydrophilic waterstops for • Installation in contraction and construction joints KS M 6518
sea water
Recommended
Name Description Highlighted Uses Standard
Coverage
ASTM D412
Elongation: ≥ 400%
Waterproofing and protection of:
ASTM D412 Tensile
One component, water
• Exposed roofs, balconies and decks strength:
based polyurethane liquid 0.9 - 1.1 ltr/m2 to
Aquathane E400 • Wet areas, kitchens and bathrooms (undertiles) ≥ 2.0 MPa
membrane for waterproofi give 500 microns dry
• Basements and retaining walls
ng and film thickness
• Bridge platiorms ASTM C1305 Crack
protection
• Internal and external applications bridging:
• For concrete, wood, metal, gypsum boards, etc 3 mm
35
Waterproofing
Recommended
Name Description Highlighted Uses Standard
Coverage
Thickness:
• Lining of artificial lakes, ponds and tanks 1.2, 1.5, 1.8 and
Reinforced TPO • Basements and underground structures 2.0 mm
Donproof TG
waterproofing membrane • Areas exposed to weathering including roofs, Dimensions:
gardens and landscapes 2.10 × 25 or 1.5 ×
30 m
Thickness:
• Tanking and waterproofing of: 1.50, 2.00, 2.20 or
A flexible PVC waterproofing -- Basements 3.00 mm
Donproof PT EN 13967
membrane for foundations -- Retaining walls
-- Underground structures Dimension:
2.00 x 20 m
Recommended
Name Description Highlighted Uses Standard
Coverage
Primer:
5.0 - 8.0 m²/kg
37
Adhesives
Recommended
Name Description Highlighted Uses Standards
Coverage Rate
As a waterproofing
slurry: 3 - 3.5
One component, modified acrylic liquid • Ideally designed for use as a
m²/kg @ 500 micron
co-polymer specially formulated for use as brushable waterproof system with
thickness
outstanding water resistance and a
Setseal Crete a bonding agent, waterproof coating and
stabilised system which gives high
as a general concrete repair system when As a repair render
mechanical strength and chemical
mixed with cement and fine sand topping: 0.4 - 0.45
resistance to cementitious mixes
m²/kg @ 5 mm
thickness
• For permanent fixing of all types of ceramic, porcelain and other non-
porous tiles on submerged condition such as swimming pools, fountains
and potable water tanks
High performance, deformable
• Highly recommended for bathrooms, kitchens and other wet areas ANSI A118.4
cementitious tile adhesive for
Cemfix W • Excellent for exterior applications BS EN 12004, C2TE
submerged conditions with high slip
• Suitable with underfloor heating systems ISO 13007-1, C2TE
resistance and extended open time
• Suitable for fixing large format tiles
• On concrete and cement based mortar, screed and plaster
• On drywall such as gypsum boards and plaster boards
• Swimming pools
Flexible, fast setting three component
• Laboratories
solvent free epoxy ceramic tile and
• Kitchens
stone adhesive and grout with BS EN 12004, R2T
• Dairy industries
Quickmast chemical, abrasion and slip resistance, ISO 13007-1, R2T
• Meet poultry and food processing plants
EP550 mould, stain and water ISO 13007-3, RG
• Hospitals
impermeability that may be applied
• Abatoirs
on humid substrates
• Pharmaceutical plants
39
Building Finishing
Products
Produced to serve the residential and
commercial construction industry, with
easy to apply, cost effective and attractive
products such as putties, plasters, and
decorative coatings to provide protective and
aesthetic finishing.
Applications
Air
Textured Spray Plaster Approximate
Name Description Internal External Vertical Overhead Trowel Spray
Roll
Gun
Machine Yield
Cementitious levelling
Proplast plaster with improved
15.00 - 16.00
CM100 bond strength, high
litre/25 kg bag
impact and condensate
resistance
• For permanent fixing of all types of lightweight blocks 6.3 m²/25 kg bag for
Lightweight block thin
• Can be used internally and externally 60 x 20 x 15 cm
Cemfix AAC laying cementitious mortar
• Non sag, can be used for vertical and horizontal blocks @ 3 mm
with water resistance
surfaces thickness
• Slab on grade
• Stamped concrete
• Pre-cast concrete
High performance fibrillated • Water tanks 125 gram/50 kg
PPF Fiber ASTM C1116, Type 3
polypropylene fibers • Pavements of cement
• Shotcrete
• Renders
• Composite decks
41
Structural
Strengthening
Very specialised products and systems
for use in the area in civil engineering that
deals with changing structural elements
loading capacities to accommodate changing
requirements or elements deterioration or
insufficient capacities.
Profibre CP Heavy duty carbon fibre reinforced polymer plate structural strengthening system
Profibre GFW High strength woven glass fabric for structural strengthening
Chennai Plant:
Survey No: 1/6, Satyavedu Raod, Kavaripettai,
Gummidipoondi Taluk, Thiruvallur District,
(Chennai) 601 206, Tamil Nadu, India,
Tel: +91 44 37904499/24338273/7667652224
Bengaluru
Jaipur Plant:
F-136-137, RIICO Industrial Area Manda,
Chomu - 303712, Rajasthan
Tel: 0141-2230581/9414052221
Distribution Center
Rajasthan:
T-15, Alankar Plaza, Central Spine,
Vidyadhar Nagar, Jaipur, Rajasthan 302039
Tel: +91 141 2230581/2235159/7338677715/7338677719