Professional Documents
Culture Documents
Wind-Resistance and Aseismatic Mechanics Analysis of The Stereo Garage
Wind-Resistance and Aseismatic Mechanics Analysis of The Stereo Garage
2/11/2017
content
Ø Material parameters:
Poisson's Density(g Yield Strength Tensile Strength Young's Modulus
Material Elongation
Ratio /cm^3) (Mpa) (Mpa) (Mpa)
• The garage maximum stress is 95.73 Mpa, • The framework maximum stress is 50.12
below the material yield stress (Q235B / Mpa,below the material yield stress
235 Mpa), there is no risk of failure. (Q235B / 235 Mpa), there is no risk of
failure.
Simulation results(Aseismatic)
Ø Internal rack Ø Loaded frame
• The Internal rack maximum stress is 10.2Mpa, • The loaded frame maximum stress is 47.23 Mpa,
below the material yield stress (Q235B / 235 below the material yield stress (Q235B / 235
Mpa), there is no risk of failure. Mpa), there is no risk of failure.
Simulation results(Aseismatic)
Ø Chain Ø Stent
• The chain maximum stress is 95.73 Mpa, • The stent maximum stress is 20.23 Mpa,
below the material yield stress (Q235B / below the material yield stress (Q235B /
235 Mpa), there is no risk of failure. 235 Mpa), there is no risk of failure.
Simulation results(Wind)
Ø The overall stress nephogram Ø The framework
• The garage maximum stress is 35.44 Mpa, • The framework maximum stress is 27.08 Mpa
below the material yield stress (Q235B / 235 ,below the material yield stress (Q235B /
Mpa), there is no risk of failure. 235 Mpa), there is no risk of failure.
Simulation results(Wind)
Ø Internal rack Ø Loaded frame
• The Internal rack maximum stress is 35.44Mpa, • The loaded frame maximum stress is 1.47 Mpa,
below the material yield stress (Q235B / 235 below the material yield stress (Q235B / 235
Mpa), there is no risk of failure. Mpa), there is no risk of failure.
Simulation results(Wind)
Ø Chain Ø Stent
• The chain maximum stress is 31.9 Mpa, • The stent maximum stress is 2.74 Mpa,
below the material yield stress (Q235B / below the material yield stress (Q235B /
235 Mpa), there is no risk of failure. 235 Mpa), there is no risk of failure.
conclusion