Professional Documents
Culture Documents
Steel Threaded Rod: Hardware
Steel Threaded Rod: Hardware
Hardware
Channel
15⁄8"
Wt/100 Ft.
Telestrut
Part No. Size Lbs (kg)
System
1
HTHR025 ⁄4" x 20 13
5.9
5
HTHR031 ⁄16" x 18 20
9.1
Hardware
Nuts &
3
HTHR037 ⁄8" x 16 30
13.6
7
HTHR044 ⁄16" x 14 30
13.6
1
HTHR050 ⁄2" x 13 53
General
Fittings
24.0
5
HTHR062 ⁄8" x 11 84
38.1
3
HTHR075 ⁄4" x 10 124
Pipe/Conduit
56.2
Supports
7
HTHR087 ⁄ 8" x 9 170
77.1
HTHR100 1" x 8 223
101.2
Electrical
Fittings
Concrete
Inserts
Load Carrying Capacity Of Threaded Hot Rolled Steel
Conforming To Astm A575 And A576
11⁄4" Framing
System
Maximum Maximum
Safe Load Safe Load
Nominal Root Area at 650°F (343°C) Nominal Root Area at 650°F (343°C)
Diameter In2 (mm2) Lbs (kg) Diameter In2 (mm2) Lbs (kg)
3
⁄8 0.068 610 11⁄4 0.889 8,000
43.9 277 573.5 3,629
Framing
1
⁄2 0.126 1,130 13⁄8 1.053 9,470
System
81.3 513 679.4 4,296
5
⁄8 0.202 1,810 11⁄2 1.293 11,630
13⁄16"
130.3 821 834.2 5,275
3
⁄4 0.302 2,710 15⁄8 1.515 13,630
194.8 1,229 977.4 6,182
Fiberglass
7
13⁄4
System
⁄8 0.419 3,770 1.714 15,690
270.3 1,710 1,105.8 7,117
1 0.552 4,960 17⁄8 2.048 18,430
356.1 2,250 1,321.3 8,360
11⁄8 0.693 6,230 2 2.292 20,690
Special
Metals
"Extracted from American Standard Code for pressure piping (ASA B31.1-1973, with permission of the publisher, the
American Society of Mechanical Engineers, United Engineering Center, 345 E. 47th Street, New York, New York)."
PrimeAngle
System
Product
Index
®
NUTS & HARDWARE
Channel Nuts With Springs .............................. 78
RU
T Hardware ............................................................ 81
UNIST
are case hardened, assuring positive biting action into the SIZE 20 18 16 13 11 10
inturned edge of the Unistrut channel. FOOT 6 11 19 50 100 125
LBS.
N.m 8 15 25 70 135 170
The standard channel nut conforms to ASTM A576 GR
1015 modified and A1011 SS GR 45.
DIMENSIONS
Screws conform to SAE J429 GR 2 (also meets and
exceeds ASTM A307). Imperial dimensions are illustrated in inches. Metric
dimensions are shown in parenthesis or as noted.
Unless noted, all metric dimensions are in millimeters
FINISHES and rounded to one decimal place.
Nuts, bolts and washers are electro-galvanized (EG),
ASTM B633 Type III SC1 finish, unless otherwise noted. Many Unistrut nuts, bolts and hardware items are also
available in standard metric dimensions. Consult factory
Many hardware items are also available in stainless steel. for ordering information.
Consult factory for ordering information.
THREADS
All threads on the nuts and bolts are Unified and
American coarse screw threads.
75