Professional Documents
Culture Documents
Making Cable Omron HMI Programming Cable
Making Cable Omron HMI Programming Cable
plc247.com/making-cable-omron-hmi-programming-cable/
With new OMRON HMIs like NB-Series, we can connect to them via USB, Enthernet, but
for older models like NT-Series, we can only connect to them via COM DB9.
Therefore, this article plc247.com will guide you to make 1 programming cable OMRON
NT-Series via RS-232 port.
Preparation
1. Jack port COM-DB9 Male (Connect to the RS232 port of the HMI)
1/2
Cable welding diagram
This is a fairly easy cable to make, you just need to solder it as the schematic diagram to
make sure you can connect to the OMRON NT-Series HMI.
Thanks!
2/2