Professional Documents
Culture Documents
Cable
plc247.com/making-cable-mitsubishi-sc09-plc-programming-cable/
Two types of cables are common for Mitsubishi PLCs. The first is the one with an 8-pin
round end that can be used for all types of FX series plc, the other end out to COM DB9 or
a USB port to connect directly to a computer. The second type is available on some newer
series of plc such as FX3S, FX3G, FX5U includes 1 mini USB for connecting to PLC, the
other end is USB for connecting to computer.
In this article, I will guide you to make 1 Cable used to connect to PLC FX-Series quickly
and easily.
Preparation
1/3
2. Jack port COM-DB9 Female ( Connect to a computer )
3. Resistor
MARKING CABLE
You conduct cable welding according to the following chart
2/3
plc247.com has made this cable successfully and has tried to work with the PLC like a
genuine USB-SC09 cable. You guys just do it right as this is the activity
3/3