Professional Documents
Culture Documents
SALGARE
PIPING ENGINEER (STRESS ANALYSIS)
+918888149143
Maheshsalgare143@gmail.com
Address: Flat no-302, Vasant Vihar , Santosh Nagar,Pune-411033
CARRER OBJECTIVE:
To fulfill my urge to develop myself as a successful Piping Engineer and to
contribute to the organization in achieving its goals through my dedication.
WORK EXPERIENCE
4.5 Years
Work Experience
Experience Summary:
Hands on experience includes static analysis of critical lines connected with Pumps, Turbines,
Heat Exchangers, Vessels, Column, Reboilers, Underground and Aboveground Pipelines
Connected to Pig launcher and Pig Receiver, FRP pipelines using CAESAR-II.
Also have knowledge of ROHR-2.Familar with ASME codes 31.1, 31.3, 31.8, ISO-14692, EN-13480, API 610, NEMA SM 23,
WRC-107/297. PSV analysis, Flange Leakage check by using NC-3658,selection of Spring Hangers And Expansion Joints
and preparation of Data Sheets for same, Piping Stress Analysis of Jacketed piping And Rack Piping.
Project-IGPL-DEP Client-IGPL
Modeling and Analysis of line connected to boiler IBR lines Steam and condensate by ASME B 31.1 Modelling
and Analysis of Jacketed line (10 inch header coming from rack to 4 tanks)
Analysis done by considering Seismic and wind Conditions Nozzle Load submission to Vendor for Approval
Selection of support type and Load Submission to civil Department Support markup and Stress
Report
Modeling and analysis of FRP Pipelines (1.5km) connected to pumps and Valve Chamber. Lines
Runs On pipe rack by using ISO-14692
Seismic and wind consider for analysis Selection of Expansion Joint
Load Submission to civil Department
Preparation of Stress Report and Node Markup on Piping GA
Identifying critical lines for stress analysis and stress loop marking in
P & ID Study of Project specific Stress Critical Line List
Preparation of different stress packages through review of P&IDS
and line list Study of Job specific Design Basis for Stress
Modelling and Analysis Of line connected to Boilers and Steam
Header by ASME B 31.1
Modeling of piping configuration connected to static and rotating
equipment’s using CAESAR II Stress Analysis (CAESAR II) of piping
configurations, lines connected to :
Static Equipment’s: Heat Exchangers, Columns, Vessels, Drums,
Boiler, Evaporator Selection of pipe supports
Locate and identify pipe supports on isometrics along with type of
supports Checking loads & Stresses on Equipment Nozzles
Provide piping loading information to civil/structure
Prepare complete documentation of the stress analysis and support
design Civil Information Drawing and Structural Loading
Study of Job specific Design Basis for Stress
Analysis done By considering Seismic and wind Conditions
Modeling and Analysis of Steam Inlet and Steam Exhaust line
connected to turbine, Boiler and Deaerator by ASME B 31.1
Selection of spring hanger and Preparation of Spring Hanger specification
chart Performed API610, WRC 107/297 nozzle qualification
Project-PGP Underground Pipeline. Client-Pens pen
Modeling and Analysis of 6” (20km) and 8” (15km) Underground Pipelines
using ASME B 31.8 Pig Launcher and Pig Receiver Nozzles, Monolithic
Expansion Joint Load Evaluation
Thrust Block location Selection
Buried Caesar-ii Model by Caesar-II basic model And ALA method
Preparation of Stress Report and Node Markup on Alignment
Sheets and GA Flange Leakage Analysis by NC-3658
Education
BE MECHANICAL Graduated, June 2016
Orchid Engineering Collage, Marks 69.50%
Solapur University, First Class With Distinction
Solapur, Maharashtra.
HSC Graduated, July 2012
Pune Board, Marks 65%
Pune, Maharashtra. First Class
SSC Graduated, June 2009
Pune Board Marks 84.50%
Pune, Maharashtra. FIRST Class with Distinction
Personal Details
Mahesh G Salgare