Professional Documents
Culture Documents
PC
D235 A
Device
Features Highlights
High Reliability
The device is powered by a redundant
Operation temperature range –25 to +70°C
24 volt supply input.
PC D235 A
Opto interface
UF D202 A ABB
PowerLinks
Communication
FPGA
IO Digital Output
application IO
ADC control Digital Input
Supply
Supply Analog Output
Power Supply Inputs
Digital Inputs
Redundant 24V 20 to 28V Isolated 24/48 volt
Max. supply current 2A Input Channels 2 groups of 6
One polling voltage supply
per group
Communication Input current typically 6mA
RS 485 Isolated bender relay interface Isolation test voltage 500Vrms
10MBd Optical Link Polling voltage 24V
Max. current of polling
voltage supply 85mA
Analog Inputs
Input voltage range
Input current range
-10V…+10V
-20mA…+20mA
Digital Outputs
Burden resistance 50 Relay output channels 2 groups of 8
< 1% FSR Switching voltage 240VAC; 2A
Input bandwith 2kHz Switching voltage 250VDC; 0.3A
Isolation test voltage 500Vrms
Analog Outputs
Device Address
Output voltage range -10V…+10V
Max. output current 5mA Setting range 0 to 15
< 1% FSR
Temperature Inputs
Environmental Requirements
3-Wire measurement Operating temp -25 to +70°C
Suitable sensor PTC and PT100 Relative humidity (40°C) 5% to 95%
Meas. range PT100 -40 to +240°C Vibrations IEC 60255-21
Accuracy PT100
Switching resistance PTC
< 1.5°C
500
EMC
Reliability (GB, 40°C)
IEC/EN 61000
7082 FIT
Specifications are subject to change without notice
© Copyright 2007 ABB. All rights reserved.
3BHS294929 E02 / 11.2009