Professional Documents
Culture Documents
FEATURES
• 21.5 dB Gain
• 75 V input and output match
• Characterized at +58dBmV output power
• Superior gain flatness (+ 0.2dB)
• Very Low Distortion
• Stable with High VSWR Load Conditions
• Monolithic GaAs Design for Consistent
Performance Part-to-Part
• Surface Mount Package Compatible with
Automatic Assembly
• RoHS Compliant Package
APPLICATIONS
• CATV Line Amplifiers, Deep Fiber Nodes S7 Package
16 Pin Wide Body SOIC
with Heat Slug
PRODUCT DESCRIPTION
The ACA2420 is a highly linear, monolithic distortion. A hybrid equivalent that provides flat
GaAs RF amplifier that has been developed to gain response and excellent input and output return
replace, in new designs, standard CATV hybrid loss over the 40 to 1000 MHz CATV downstream
amplifiers. Offered in a convenient surface mount band is formed when one ACA2420 is cascaded
package, the MMIC consists of two pairs of parallel between two appropriate transmission line baluns.
amplifiers that are optimized for exceptionally low
1A 2A
RF Input
RF Output
1B 2B
ACA2420
Figure 1: Hybrid Application Diagram
07/2008
ACA2420
1 GND GND 16
2 2A IN 1A OUT 15
3 GND Bias 1A 14
4 1A IN 2A OUT 13
5 1B IN 2B OUT 12
6 I SET Bias 1B 11
7 2B IN 1B OUT 10
8 GND GND 9
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Mimimum and Maximum Ratings
PARAMETER MIN MAX UNIT
CTB (1)
77 Channels (2) - -78 TBD
77 Channels (3) - -76 -74 dBc
110 Channels (4) - TBD -
CSO (1)
77 Channels (2) - -71 TBD
77 Channels (3) - -69 -67 dBc
110 Channels (4) - -64 -
XMOD (1)
77 Channels (2) - -64 -
77Channels (3) - -63 -61 dBc
110 Channels (4) - TBD -
CIN (1)
77 Channels (3) - - -58
dBc
110 channels (4) - - TBD
23
22.5
22
21.5
21
Gain (dB)
20.5
20
19.5
19
18.5
18
0 100 200 300 400 500 600 700 800 900 1000 1100 1200
Frequency (MHz)
-5
S22
-10
S11
Return Loss (dB)
-15
-20
-25
-30
-35
-40
0 100 200 300 400 500 600 700 800 900 1000 1100 1200
Frequency (MHz)
Figure 4: Input and Output Return Loss (S11 and S12) vs. Frequency
(TA=+25 OC, VDD=+24 V, 75 ohm system)
ADVANCED PRODUCT INFORMATION - Rev 0.1 5
07/2008
ACA2420
Figure 5: Isolation (S12) vs. Frequency
(Ta=+25 C, Vdd=+24 V, 75 ohm system)
-5
-10
-15
-20
Isolation (dB)
-25
-30
-35
-40
-45
-50
0 300 600 900 1200 1500 1800 2100 2400 2700 3000
Frequency (MHz)
APPLICATION INFORMATION
TVS
C15
C11
R3
C14
+24 V
TVS
+ C15
C10
C4 L1
L3
C6 C8
ACA2420
T1 C1 T2
RF Input C11
C2 C9 RF Output
C7
C3
L2 L4
C5
R3 C14
+24 V
Figure 7: Evaluation Board Schematic
LQH1WA47KONO003/-
L1, L2, L3, L4 470 nH INDUCTOR 4 MURATA
4052
R3 15 K V - - -
STANDARD
Printed Circuit Board (3) 1 PRINTED CIRC. 24VX1AC50
INC.
INDIUM CORP OF
INDIUM 300 X 160 MILS 1 14996Y
AMERICA
Notes:
(1) N connector center pin should be approximately 80 mils in length.
(2) T1, T2, balun: 5.5 turns thru, as shown in Figure 15.
(3) Due to the power dissipation of this device, the printed circuit board should be mounted / attached to a heat sink.
PACKAGE OUTLINE
Figure 5: S7 Package Outline - 16 Pin Wide Body SOIC with Heat Slug
ORDERING INFORMATION
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to
verify that the information they are using is current before placing orders.
warning
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.