Professional Documents
Culture Documents
CrossLab
How to contact Agilent
Agilent
For the latest information on the complete line of Agilent Technologies
columns and supplies:
• Visit our Web site: www.agilent.com/chem
• Contact your local Agilent sales office
• Contact your local Agilent Authorized Distributor
www.agilent.com/chem/CrossLab
We currently support:
Agilent
• Bruker, Varian*
• CTC
• PerkinElmer
• Shimadzu
• Thermo Scientific
• And more coming soon
Our growing portfolio includes the following products,
featuring easy-to-use packaging for improved productivity:
www.agilent.com/chem/CrossLab 1
5990-9065EN_01Intro.qxd:Layout 1 9/19/11 2:57 PM Page 2
Choose from split, splitless, PTV, and other inlet liner designs in either the new, innovative Ultra Inert
deactivation or Agilent's popular proprietary deactivation, now referred to as Agilent Original
deactivation. With part number and lot number silk screened on CrossLab liners, identification
and re-ordering has never been easier.
• Reproducibility – highest level and consistent inertness for active compounds such as
acids and bases
• Robustness – tested with a sequence of 100 injections of Endrin/DDT with < 20%
degradation, allowing use of glass wool even with highly active compounds at trace
(0.5 ng on-column) levels
• Reliability – lot-tested for inertness to ensure consistent and efficient deactivation using
both acidic and basic probes at trace level (2 ng) on-column, with low to no bleed or
background contamination
Ultra Inert liners are delivered in Agilent's exclusive Touchless packaging. Touchless packaging aids in
Consider the following to determine easy installation of the new, clean, preconditioned liner – without risk of contamination from touching.
how often to change your liners:
Poor reproducibility
tightly to hold liner as gently lower and release (sold separately)
you remove plastic tube
Sample pyrolysis
Active analyte response loss
CrossLab Ultra Inert Touchless liner packaging includes visual installation guide.
or decomposition
Agilent CrossLab Ultra Inert deactivated liners with wool contribute to higher response and better peak shape for very active forensic basic drug
compounds than similar Restek Siltek liners.
www.agilent.com/chem/CrossLab 3
5990-9065EN_01Intro.qxd:Layout 1 9/19/11 2:57 PM Page 4
Using the wrong ferrule or a worn-out ferrule to seal your column connection can result in inconsistent Look for the following signals that indicate
and unreliable chromatography. An improper ferrule can cause leaks, which allow air and other ferrule damage:
contaminants to enter the instrument through the column seal, causing major interference with column
and detector performance.
• Background noise from oxygen
diffusing into the system
The ideal ferrule provides a leak-free seal, accommodates various column outer diameters, seals with • Column bleed catalyzed by oxygen
minimum torque, withstands temperature cycling, and does not stick to the column or fittings. • Sample degradation
For optimum performance, ferrules should be replaced every time the column is replaced and when
• Sample loss
performing column maintenance. • Increase in detector signal/noise
• Poor retention time reproducibility
To minimize problems, follow these general techniques for ferrule installation:
• Don't overtighten – finger tighten the column nut, then use wrench to tighten
• Maintain cleanliness
• Bake out ferrules prior to use (Vespel and Vespel/Graphite only)
• Avoid contamination, such as fingerprint oils
• Inspect used ferrules with magnifier for cracks, chips, or other damage before reusing them
• Change ferrules when new columns or injector/detector parts are installed
www.agilent.com/chem/CrossLab 5
5990-9065EN_01Intro.qxd:Layout 1 9/19/11 2:57 PM Page 6
contamination
Vespel/Graphite 350 °C General purpose for capillary columns Mechanically robust Not reusable
(85%/15% or Recommended for MS and oxygen- Long lifetime Flows at elevated
60%/40%) sensitive detectors temperature
Most reliable leak-free connection Must re-tighten frequently
Vespel (100%) 280 °C Isothermal operation Mechanically robust Leaks after
Can be reused or removed easily Long lifetime temperature cycle
Excellent sealing material when Can be reused Flows at elevated
temperature
Must re-tighten frequently
making metal or glass connections or removed easily
www.agilent.com/chem/CrossLab 7
5990-9065EN_01Intro.qxd:Layout 1 9/19/11 2:57 PM Page 8
Needle Gauge
23 (0.64 mm)
Single Gauge 23 (0.64 mm)
Packed column injector ports
Split/splitless injector ports
26 (0.47 mm)
Single Gauge 26 (0.47 mm)
Packed column injector ports
Split/splitless injector ports
Needle Termination
Needle terminations are available in fixed or removable, with various tip styles.
Fixed (cemented)
• Economical, reproducible injections for autosamplers
Tips & Tools • Preferred for applications requiring trace level samples
• Recommended for use where probability of needle bending is minimal
• Can be heated up to 70 °C
Follow manufacturer's recommendation
for syringe cleaning and regularly inspect
syringe barrel for sample build-up and Removable needle
needle tip for wear.
• Versatile option for injections
• Needle can be replaced if damaged or clogged
• Allows needle to be changed for different applications
• Can be heated up to 120 °C
Septa are available for a variety of different applications and have different upper temperature limits.
Lower temperature septa are usually softer, seal better, and can withstand more punctures (injections)
than their high-temperature counterparts. If septa are used above their recommended temperatures,
they can leak or decompose, causing sample loss, lower column flow, decreased column life and
ghosting. To minimize problems:
www.agilent.com/chem/CrossLab 9
5990-9065EN_01Intro.qxd:Layout 1 9/19/11 2:57 PM Page 10
Septa Diameters
11 mm 11.5 mm 12.7 mm 17 mm
www.agilent.com/chem/CrossLab 11
5990-9065EN_01Intro.qxd:Layout 1 9/19/11 2:57 PM Page 12
www.agilent.com/chem/CrossLab 13
5990-9065EN_01Intro.qxd:Layout 1 9/23/11 10:40 AM Page 14
Septa Troubleshooting
www.agilent.com/chem/CrossLab 15
5990-9065EN_02Bruker-Varian.qxd:Layout 1 9/19/11 3:17 PM Page 16
Split/Splitless Liners
Single taper 4.0 6.3 78.5 1000 5/pk 8004-0151 RT207992145 8004-0101 SG092017
SG092017
Single taper, 4.0 6.3 78.5 1000 5/pk 8004-0152 SG092019 8004-0102 SG092019
with wool
Double taper 4.0 6.3 78.5 1000 5/pk 8004-0155 SG092018 8004-0105 SG092018
Gooseneck, 4.0 6.5 78.5 1000 5/pk 8004-0170 392611936 8004-0114 392611936
with wool
Recessed 4.0 6.3 78.5 1000 5/pk 8004-0153 SG092010 8004-0103 SG092010
gooseneck,
with wool
Gooseneck 2.0 6.5 78.5 250 5/pk 8004-0178 392611926 8004-0119 392611926
Splitless Liners
Straight, 4.0 6.5 78.5 1000 5/pk 8004-0173 392611937 8004-0116 392611937
with wool
Gooseneck 4.0 6.5 78.5 1000 5/pk 8004-0165 392611927 8004-0113 392611927
Split Liners
Straight-through 4.0 6.3 78.5 1000 5/pk 8004-0156 RT207732145 8004-0106 SG092007
SG092007
Straight, 4.0 6.3 78.5 1000 5/pk 8004-0154 SG092001 8004-0104 SG092001
with wool 392611934 392611934
Direct Liners
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may
have slightly different designs as compared to the OEM counterparts.
Split/Splitless Liners
Single taper 3.4 5.0 54 500 5/pk 8004-0160 RT209012145 8004-0108 SG092038
SG092038
Splitless Liners
Single taper 2.0 5.0 54 170 5/pk 8004-0161 RT207122145 8004-0109 SG092039
SG092039
Split Liners
Other Liners
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may
have slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 17
5990-9065EN_02Bruker-Varian.qxd:Layout 1 9/19/11 3:17 PM Page 18
Direct Liners
SPI with 0.5 mm 0.8 4.6 54 30 5/pk 8004-0162 SG092034 8004-0110 SG092034
restriction for 190010907 190010907
0.53 mm ID
on-column
Split Liners
With wool 4.0 6.3 72 1000 5/pk 8004-0163 SG092021 8004-0111 SG092021
190010901 190010901
Direct Liners
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may
have slightly different designs as compared to the OEM counterparts.
Liner O-rings
Similar to
OEM
Description Unit Part No. Part No.
Non-stick fluoroelastomer O-ring, 1177 split/splitless, 10/pk 8004-0201 8850103100
6.3/6.5 mm OD
Graphite O-ring, 1177 split/splitless, 6.5 mm OD 10/pk 8004-0202 392611930 Graphite O-rings
Graphite O-ring, 1177 split/splitless, 6.3 mm OD 10/pk 8004-0203 392611935
Graphite O-ring, 1078/1079 injector, 5 mm ID 10/pk 8004-0204 392534201
Column Ferrules
60% Vespel/40% Graphite Capillary Column Ferrules
Similar to
OEM
Injector Fitting Size (in.) Ferrule ID (mm) Column ID (mm) Hole Unit Part No. Part No.
1177, 1079 1/16 0.3 0.18 mm ID or smaller 1 10/pk 8004-0211 CR213103
1/16 0.4 0.25 2 10/pk 8004-0213 CR213124
1/16 0.425 0.25 1 10/pk 8004-0212 CR213104
1/16 0.5 0.32 1 10/pk 8004-0214 CR213105
1/16 0.5 0.32 2 10/pk 8004-0215 CR213125
1177, 1079, 1061, 1041 1/16 0.8 0.53 1 10/pk 8004-0216 CR213108
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may
have slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 19
5990-9065EN_02Bruker-Varian.qxd:Layout 1 9/19/11 3:17 PM Page 20
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may
have slightly different designs as compared to the OEM counterparts.
Column Nuts
Similar to
OEM
Description Unit Part No. Part No.
Column nut, brass, 1177, 1079, 1061, or 1041 injector 2/pk 8004-0311 394955100
Column nut, stainless steel, 1093 injector 2/pk 8004-0312 CP743117
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may
have slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 21
5990-9065EN_02Bruker-Varian.qxd:Layout 1 9/19/11 3:17 PM Page 22
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may
have slightly different designs as compared to the OEM counterparts.
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may
have slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 23
5990-9065EN_03PerkinElmer.qxd:Layout 1 9/19/11 3:21 PM Page 24
Split/Splitless Liners
PSS straight with 2.0 4.0 86.2 260 5/pk 8003-0158 N6121004
bottom restriction
PSS on-column 2.0 4.0 86.2 250 5/pk 8003-0165 N6101539 8003-0110 N6101539
Straight with 4.0 6.2 92.1 1150 5/pk 8003-0159 N6121001 8003-0105 N6121001
bottom restriction
Splitless Liners
Straight 2.0 6.2 92.1 300 5/pk 8003-0162 N6101372 8003-0107 N6101372
Split Liners
Straight, wool 4.0 6.2 92.1 1100 5/pk 8003-0160 N6121020 8003-0106 N6121020
Straight with 4.0 6.2 92.1 1100 5/pk 8003-0166 N6101052 8003-0111 N6101052
bottom restriction
(Continued)
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products
are viable alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the
CrossLab products may have slightly different designs as compared to the OEM counterparts.
Direct Liners
Other Liners
Packed column, 3.0 6.2 112 800 5/pk 8003-0163 N6121000 8003-0108 N6121000
straight
Programmable 2.2 4.0 16 5/pk 8003-0109* N6101703
on-column,
hour glass
Liner O-rings
Similar to
OEM
Description Unit Part No. Part No.
Non-stick fluoroelastomer O-ring 10/pk 8010-0401 N9302783
Non-stick fluoroelastomer O-ring, PSS Injector 10/pk 8003-0202 N6101747
Silicone O-ring 10/pk 8003-0203 N6101374
Graphite O-ring, PSS Injector 10/pk 8003-0204 N6101751
Graphite O-ring 10/pk 8003-0205 N6101378
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 25
5990-9065EN_03PerkinElmer.qxd:Layout 1 9/30/11 2:05 PM Page 26
Column Ferrules
85% Vespel/15% Graphite Capillary Column Ferrules
Similar to
OEM
Model Fitting Size (in.) Ferrule ID (mm) Column ID (mm) Hole Unit Part No. Part No.
AutoSystem, Autosystem XL, Clarus 1/16 0.4 0.25 1 10/pk 8010-0310 09920104
1/16 0.4 0.25 2 10/pk 8010-0312 04972392
1/16 0.5 0.32 1 10/pk 8010-0311 09920105
1/16 0.5 0.32 2 10/pk 8003-0216 N9306000
1/16 0.8 0.53 1 10/pk 8010-0313 09920107
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
Column Nuts
Similar to
OEM
Description Unit Part No. Part No.
Column nut, 1/16 in. 2/pk 8003-0311 09903392
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 27
5990-9065EN_03PerkinElmer.qxd:Layout 1 9/19/11 3:21 PM Page 28
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
Splitless Liners
Split Liners
Straight with 3.5 5.0 95 800 5/pk 8001-0156 221-41444-01 8001-0106 221-41444-01
middle restriction
Direct Liners
For 0.53 mm ID 2.6 5.0 95 450 5/pk 8001-0152 220-94768-00 8001-0102 220-94768-00
column
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 29
5990-9065EN_04Shimadzu.qxd:Layout 1 9/19/11 3:24 PM Page 30
Split/Splitless Liners
Splitless Liners
Split Liners
Straight with 3.5 5.0 95 800 5/pk 8001-0156 221-41444-01 8001-0106 221-41444-01
middle restriction
Other Liners
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
Splitless Liners
Split Liners
Direct Liners
For 0.53 mm ID 2.6 5.0 95 450 5/pk 8001-0152 220-94768-00 8001-0102 220-94768-00
column
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 31
5990-9065EN_04Shimadzu.qxd:Layout 1 9/19/11 3:24 PM Page 32
Split/Splitless Liners
Liner O-rings
Similar to
OEM
Description Unit Part No. Part No.
Non-stick fluoroelastomer O-ring 10/pk 8001-0201 036-11203-84
Graphite O-ring, split 10/pk 8001-0202 221-48393-91
Graphite O-ring, splitless 10/pk 8001-0203 221-47222-91
Graphite O-rings
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
Column Ferrules
85% Vespel/15% Graphite Capillary Column Ferrules
Similar to
OEM
Model Fitting Size (in.) Ferrule ID (mm) Column ID (mm) Hole Unit Part No. Part No.
QP5000/5050 Standard MS 1/16 0.3 0.18 mm ID 1 10/pk 8001-0224 220-90700-01
or smaller
1/16 0.4 0.25 1 10/pk 8001-0221 220-90700-02
1/16 0.5 0.32 1 10/pk 8001-0222 220-90700-03
1/16 0.8 0.53 1 10/pk 8001-0223 220-90700-04
QP2010 1/16 0.4 0.25 1 10/pk 8010-0310 220-90418-14
1/16 0.4 0.25 2 10/pk 8010-0312 225-19056-00
1/16 0.5 0.32 1 10/pk 8010-0311 220-90418-15
1/16 0.8 0.53 1 10/pk 8010-0313 220-90418-18
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 33
5990-9065EN_04Shimadzu.qxd:Layout 1 9/19/11 3:24 PM Page 34
Column Nuts
Similar to
OEM
Description Unit Part No. Part No.
Column nut, slotted, 6-sided 2/pk 8001-0311 221-32705-00
Column nut, no slot, 6-sided 2/pk 8001-0312 221-41533-00
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 35
5990-9065EN_05Thermo.qxd:Layout 1 9/19/11 3:36 PM Page 36
Splitless Liners
Single taper 5.0 8.0 105 1750 5/pk 8002-0153 45350033 8002-0103 45350033
Straight 3.0 8.0 105 750 5/pk 8002-0152 45350031 8002-0102 45350031
Single taper 3.0 8.0 105 5/pk 8002-0154 45350032 8002-0104 45350032
Split Liners
Straight 5.0 8.0 105 2000 5/pk 8002-0151 45350030 8002-0101 45350030
PTV Liners
Straight 2.0 2.75 120 375 5/pk 8002-0156* 45322045 8002-0106* 45322045
Straight 2.0 2.75 120 375 5/pk 8002-0157 45352057 8002-0107 45352057
with bottom
restriction
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
Liner O-rings
Similar to
OEM
Description Unit Part No. Part No.
Non-stick fluoroelastomer O-ring, sintered liner 10/pk 8002-0201 29031305
Non-stick fluoroelastomer O-ring 10/pk 8010-0401 29030306
Graphite O-ring, 8 mm OD 2/pk 8002-0203 29033406
Graphite O-ring, PTV 2/pk 8002-0204 29013417
Column Ferrules
85% Vespel/15% Graphite Capillary Column Ferrules
Similar to
OEM
Model Fitting Size (in.) Ferrule ID (mm) Column ID (mm) Hole Unit Part No. Part No.
Injectors/Detectors 1/16 0.4 0.25 1 10/pk 8002-0220 290VT186
1/16 0.5 0.32 1 10/pk 8002-0221 290VT187
1/16 0.8 0.53 1 10/pk 8002-0222 290VT188
Any GC/MS Interface 1/16 0.4 0.25 1 10/pk 8010-0310 29033496
1/16 0.5 0.32 1 10/pk 8010-0311 29033497
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 37
5990-9065EN_05Thermo.qxd:Layout 1 9/19/11 3:36 PM Page 38
Column Nuts
Similar to
OEM
Description Unit Part No. Part No.
Column nut, stainless steel, split/splitless injector 2/pk 8002-0311 35032423
Column nut, brass 2/pk 8002-0312 290BT239
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a recommendation that the CrossLab products are viable
alternatives to OEM products. CrossLab products are compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 39
5990-9065EN_05Thermo.qxd:Layout 1 9/19/11 3:36 PM Page 40
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as a
recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab products are
compatible with the corresponding OEM instruments, although in some cases, the CrossLab products may have
slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 41
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:46 PM Page 42
8 mm 9 mm 15 x 45 mm, 11 mm
Manufacturer Autosampler Screw Top Screw Top 4 mL Crimp Top Headspace
Bruker, Varian* CP-8410 ] ] ]
8034/8035/8100/8200 ] ] ]
9095/9100 ] ] ]
Prostar 400/410/420 ] ] ]
Prostar 430 ] ] ]
Genesis ]
PerkinElmer Autosystem GC/XL/AS-2000 ] ] ] ]
Clarus 500/600 ] ]
Integral 4000 ] ] ]
TurboMatrix 40/110 ]
ISS-100/200 ] ] ]
HS16/40 ]
LC Plus ] ] ]
LC 600 42 vial tray ]
Shimadzu AOC 88/9 ] ] ]
AOC-5000 ] ] ] Magnetic
AOC-20 ] ] ]
AOC14/1400 ] ] ]
HSS-2B/4B ]
SIL-6A/6B/9A With flange
SIL-10A, SIL-10Ai, SIL-10AxL ] ]
SIL-HT/10ADVP ] ] ]
LC 2010 ] ] ]
Thermo Scientific SURVEYOR LC ] ] ]
AS 3000/TRACE GC ] ]
TriPlus ] ]
A-200S/AS 150/800/8000 ] ] ]
CTC Analytics CombiPal ] ] ] Magnetic
Waters Acquity ] ] ]
Alliance 2690 ] ]
CapLC ] ] ]
WISP ]
717 Plus ]
*Formerly Varian GC systems, now Bruker products
Wide Opening
Snap Top Vials Micro Vials Polypropylene Vials
1.7 mL 1.3 mL 0.8 mL 0.1 mL 0.3 mL 250 µL 250 µL 250 µL 250 µL 0.7 mL
8010-0023 8010-0028 8010-0153 8010-0154 8010-0155 8010-0158 8010-0160 8010-0161 8010-0162 8010-0159
Glass Insert Glass Insert
Headspace Vials
True scale: 75 mm x 22 mm
True scale: 45 mm x 22 mm
10 mL 10 mL 20 mL 20 mL 22 mL 10 mL 10 mL 20 mL 20 mL
Inserts for Wide Opening Vials Inserts for Narrow Opening Vials
Specialty Vials (11 mm & 9 mm) (8 mm)
31 mm
www.agilent.com/chem/CrossLab 43
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 44
Methanol ] ] ] ] ]
Benzene ] ] ]
THF ] ]
Toluene ] ]
DMF ] ] ] ]
DMSO ] ]
Ether ] ] ]
Chlorinated Solvents
(methylene chloride) ] ] ]
Alcohols (ethanol) ] ] ] ] ] ]
Acetic Acid ] ] ] ]
Acetone ] ] ]
Phenol ] ] ] ] ]
Cyclohexane ] ] ] ]
*PTFE/silicone/ PTFE has the same chemical compatibility of PTFE ONLY UNTIL PUNCTURED.
Agilent provides this septa compatibility information as a guide and starting reference point. We realize that chemical compatibility can vary
depending on the concentration of the solvent, temperature, molecular weight of the solvent, and other factors. Therefore, it is always
recommended that you try a variety of septa to determine the best one for your analysis.
Price Very economical Economical Most expensive Very economical Economical Economical
Best for: Superior Most common Superior Chlorosilanes, Use with Use with
chemical HPLC and GC performance more economical chlorinated organic solvents,
inertness, short analyses, not as for ultra trace option for single solvents, higher acetic acids:
cycle times and resistant to analysis, repeat injections temperatures impermeable
single injections coring as P/S/P injections, to gasses
internal
standards
*Agilent CrossLab silicone is platinum cured (versus peroxide cured) making it more inert and less likely to interact with samples.
www.agilent.com/chem/CrossLab 45
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 46
Wide opening screw top vials, 8010-0015 2 mL Wide Opening (9 mm) Screw Top Glass Vials
Description 100/pk 1000/cs
Clear 8010-0015
Clear, write-on spot 8010-0014 8010-0175
Amber 8010-0017
Amber, write-on spot 8010-0016 8010-0176
Screw Top Vials with Fixed Inserts
Clear, 300 µL insert volume 8010-0008
Amber, 300 µL insert volume 8010-0009
www.agilent.com/chem/CrossLab 47
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 48
www.agilent.com/chem/CrossLab 49
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 50
Currently using a different manufacturer's vials and closures for your Screw caps for 6 mL (16 mm) vials
instrument? See the Cross Reference List on pages 63-68
to switch to CrossLab.
www.agilent.com/chem/CrossLab 51
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 52
www.agilent.com/chem/CrossLab 53
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 54
Currently using a different manufacturer's vials and closures for your Snap top vials with write-on spot,
8010-0025
instrument? See the Cross Reference List on pages 63-68
to switch to CrossLab.
www.agilent.com/chem/CrossLab 55
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 56
To obtain an optimal fit and Currently using a different manufacturer's vials and closures for your
seal of any vial and closure, instrument? See the Cross Reference List on pages 63-68
we strongly recommend to switch to CrossLab.
buying an entire CrossLab vial
assembly (including a vial, cap,
and septum, as well as a vial insert
if needed). Please avoid mixing
and matching any CrossLab vials
with any other brand of closures,
or any CrossLab closures with
any other brand of vials.
Polypropylene Vials
Recommended Max
Description Fill Volume Fill Volume 100/pk 1000/cs
Polypropylene, crimp/snap top 250 µL 440 µL 8010-0158 8010-0193
Polypropylene, crimp/snap top 0.7 mL 1 mL 8010-0159
Polypropylene, screw top 250 µL 440 µL 8010-0161 8010-0194
Polypropylene with glass insert, 250 µL 350 µL 8010-0160
crimp/snap top Polypropylene vial with glass insert,
Polypropylene with glass insert, 250 µL 350 µL 8010-0162 8010-0160
screw top
www.agilent.com/chem/CrossLab 57
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 58
www.agilent.com/chem/CrossLab 59
5990-9065EN_07Vials.qxd:Layout 1 9/23/11 3:14 PM Page 60
www.agilent.com/chem/CrossLab 61
5990-9065EN_07Vials.qxd:Layout 1 9/23/11 10:44 AM Page 62
www.agilent.com/chem/CrossLab 63
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 64
www.agilent.com/chem/CrossLab 65
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 66
Polypropylene Vials
- - - - 8010-0158 57
392611667 - - - 8010-0159 57
R000548SCY - - - 8010-0160 57
- - - - 8010-0161 57
- - - - 8010-0162 57
- - - - 8010-0193 57
- - - - 8010-0194 57
Micro-V Vials
- - - - 8010-0004 58
8010-0005 58
- - - - 8010-0018 58
- - - - 8010-0019 58
- - - - 8010-0027 58
- - - - 8010-0028 58
Microvolume Inserts for 8 mm Screw Top Vials
- - - - 8010-0124 59
392611593 - - - 8010-0125 59
- - - - 8010-0126 59
Microvolume Inserts for 11 mm Crimp Top or 9 mm Screw Top Vials
392611594 - - - 8010-0131 59
190010204
392620538
392611596 - - - 8010-0132 59
392611636
- - - - 8010-0136 59
Headspace Crimp Top Glass Vials
CP10204 - - - 8010-0029 60
MLA21000 N6356478 - 60180-504 8010-0030 60
- - - - 8010-0031 60
392620526 - - 60180-505 8010-0032 60
CP10205 - - - 8010-0033 60
392611675 N9306079 60180-506 8010-0034 60
392612021
MLA202100 To obtain an optimal fit and
- - - - 8010-0035 60 seal of any vial and closure,
392620528 - - - 8010-0036 60 we strongly recommend
- - - - 8010-0179 60 buying an entire CrossLab vial
- - - - 8010-0180 60 assembly (including a vial, cap,
and septum, as well as a vial insert
(Continued) if needed). Please avoid mixing
and matching any CrossLab vials
The cross references to the original equipment manufacturer (OEM) part numbers listed here serve as with any other brand of closures,
a recommendation that the CrossLab products are viable alternatives to OEM products. CrossLab or any CrossLab closures with
products are compatible with the corresponding OEM instruments, although in some cases, the any other brand of vials.
CrossLab products may have slightly different designs as compared to the OEM counterparts.
www.agilent.com/chem/CrossLab 67
5990-9065EN_07Vials.qxd:Layout 1 9/19/11 5:47 PM Page 68
CrossLab
How to contact Agilent
Agilent
For the latest information on the complete line of Agilent Technologies
columns and supplies:
• Visit our Web site: www.agilent.com/chem
• Contact your local Agilent sales office
• Contact your local Agilent Authorized Distributor
www.agilent.com/chem/CrossLab