Professional Documents
Culture Documents
1 Simona Pipes, Fittings, Valves Generel Info-Katalog (56 Sider)
1 Simona Pipes, Fittings, Valves Generel Info-Katalog (56 Sider)
SIMONA –
Your Partner for Piping Systems
Content
PP tank connections
For permanently watertight
pipes, we offer you fittings for
the following connection sys- PE 80 ovoid duct
tems:
Butt welding
Electric socket welding
Electrofusion fittings
Socket welding
Infra-red welding
Flange assemblies.
damaged sewers.
Pipes
PE-Fittings
PP-Fittings
PVDF-Fittings
Remark:
Some of the PE 100 fittings are indicated with the SDR denomination SDR 17. These items are produced within the tolerance range of SDR 17 and
SDR 17,6. These fittings can consequently be connected to component parts of pressure rating SDR 17 or 17,6 by heated element butt welding and,
if suitable, by heated coil welding (with elongated spigots) as well.
SIMONA pipes and fittings are registrated by the German Instituts “Deutsches Institut für Bautechnik Berlin” and “DVGW” for gas and water.
Pipes
PE 80/PE 100 SPC-pipes Inner pipe acc. to DIN 8074/8075, DIN 19537
DIN EN 12201, DIN EN 13244
PPs Ventilation pipes DIN 4102 building material class B1; acc. to DIN 8077/8078
Pipe joints and pipe parts for pressure pipes, made of polyethylene DIN 16963
Fittings in segmentally manufactured bends for butt welding DIN 16963, Part 1
Fittings in segmentally manufactured, swept tees and branches for butt welding DIN 16963, Part 2
Fittings made of pipe formed bends for butt welding DIN 16963, Part 3
Stub flanges for filament butt welding, flanges, seals DIN 16963, Part 4
Sockets and end caps, injection moulded, for socket welding DIN 16963, Part 10
Stub flanges, flanges, sealing rings for socket welding DIN 16963, Part 11
Fittings made of polyethylene for underground pipes and pipework DIN 19537, Part 1
Pipe joints and pipework parts for pressure pipes made of polypropylene DIN 16962
Fittings in segmentally manufactured bends for butt welding DIN 16962, Part 1
Fittings in segmentally manufactured, swept tees and branches for butt welding DIN 16962, Part 2
Fittings made of pipe formed bends for butt welding DIN 16962, Part 3
Stub flanges for filament butt welding, flanges, seals DIN 16962, Part 4
Stub flanges, flanges, sealing rings for socket welding DIN 16962, Part 12
SDR PN1
51 2.5 3.2 4
41 3.2 4 2.5 3.1 3.9
33 4 5 3.2 3.9 4.9 10 ~6
26 5 6.3 4 5 6.2
22 6 ~ 7.6
21 6.3 8 5 16 10 10
17.6 ~ 7.6 ~ 9.7 6 7.5 9.3
17 8 10 6.3
13.6 10 12.5 8 ~ 16
11 12.5 16 10 12.5 15.5
9 ~ 16 20 12.5 ~ 25
7.4 20 25 ~ 16 19.8 24.5
6 25
Technical data PE 80 PE 100 PE-EL PP-H 100 PP-R 80 PPs PVDF E-CTFE
Density, g/cm3 , ISO 1183 0.955 0.958 0.99 0.91 0.90 0.95 1.78 1.68
Elongation at yield, %, 9 9 7 8 10 8 6 4
DIN EN ISO 527
Tensile-E-Modus, MPa, DIN EN ISO 527 800 900 1100 1700 800 1300 1950 1650
Impact strength, kJ/m2, without without without without without without without without
DIN EN ISO 179 break break break break break break break break
Average thermal coefficient of 1.8 · 10 -4 1.8 · 10 -4 1.8 · 10 -4 1.6 · 10 -4 1.6 · 10 -4 1.6 · 10 -4 1.3 · 10 -4 0.5 · 10 -4
elongation, K-1, DIN 53752
Thermal conductivity, W/m · K, DIN 52612 0.38 – 0.38 0.22 0.22 0.22 0.14 0.15
Surface resistance, Ohm, 1014 – < 106 1014 1014 1014 1013 1015
DIN IEC 167
Chemical resistance conforms conforms conforms conforms conforms conforms conforms conforms
acc. to DIN 8075 suppl.
Temperature range, °C – 40 up – 40 up – 20 up 0 up 0 up 0 up – 30 up – 40 up
+ 80 + 80 + 80 + 100 + 80 + 100 + 140 + 150
1 no certificate of BgVV
Materials
PE Polyethylene
PE-EL Polyethylene, electrically conductive
PP-H Polypropylene, homopolymer
PP-R Polypropylene, random copolymer
PPs Polypropylene, flame retardant
PVC-U Polyvinylchloride
PVC-GLAS Polyvinylchloride, transparent
PVC-GLAS-LZ Polyvinylchloride, transparent, physiological acceptable
PVDF Polyvinylidenefluoride
E-CTFE Ethylene-chlorotrifluorethylene
Norms/guidelines
Materials (seals)
EPDM Ethylene-propylene-caoutchouc
FPM Fluorocaoutchouc
NBR Nitrile rubber
PE Material PE 100
Pipes
Colour black
Dimensions DIN 8074,
standard length: 6 m, also in 12 m length
Remark terms of delivery on request,
other lengths on request
DIBt
approved
10 1.8 0.048
12 1.8 0.060
16 1.8 0.084
20 1.9 0.113
25 2.3 0.172
32 1.9 0.189 2.9 0.273
40 1.8 0.229 2.4 0.298 3.7 0.433
50 2.0 0.316 3.0 0.457 4.6 0.672 6.9 0.944
63 2.0 0.402 2.5 0.499 3.8 0.727 5.8 1.060 8.6 1.480
75 1.9 0.461 2.3 0.556 2.9 0.681 4.5 1.020 6.8 1.480 10.3 2.110
90 2.2 0.646 2.8 0.798 3.5 0.986 5.4 1.470 8.2 2.140 12.3 3.020
110 2.7 0.950 3.4 1.180 4.2 1.440 6.6 2.180 10.0 3.170 15.1 4.530
125 3.1 1.240 3.9 1.530 4.8 1.860 7.4 2.780 11.4 4.110 17.1 5.820
140 3.5 1.560 4.3 1.890 5.4 2.340 8.3 3.490 12.7 5.120 19.2 7.310
160 4.0 2.020 4.9 2.450 6.2 3.070 9.5 4.560 14.6 6.720 21.9 9.520
180 4.4 2.510 5.5 3.090 6.9 3.820 10.7 5.760 16.4 8.490 24.6 12.000
200 4.9 3.080 6.2 3.870 7.7 4.730 11.9 7.110 18.2 10.500 27.4 14.900
225 5.5 3.890 6.9 4.820 8.6 5.940 13.4 9.010 20.5 13.300 30.8 18.800
250 6.2 4.870 7.7 5.970 9.6 7.360 14.8 11.000 22.7 16.300 34.2 23.200
280 6.9 6.030 8.6 7.460 10.7 9.180 16.6 13.900 25.4 20.400 38.3 29.100
315 7.7 7.570 9.7 9.450 12.1 11.700 18.7 17.600 28.6 25.800 43.1 36.800
355 8.7 9.630 10.9 11.900 13.6 14.800 21.1 22.300 32.2 32.800 48.5 46.700
400 9.8 12.200 12.3 15.200 15.3 18.700 23.7 28.200 36.3 41.600 54.7 59.300
450 11.0 15.400 13.8 19.100 17.2 23.700 26.7 35.700 40.9 52.700 61.5 75.000
500 12.3 19.100 15.3 23.600 19.1 29.200 29.7 44.200 45.4 65.100
560 13.7 23.800 17.2 29.700 21.4 36.600 33.2 55.300 50.8 81.500
630 15.4 30.100 19.3 37.400 24.1 46.300 37.4 70.000 57.2 103.200
710 17.4 38.300 21.8 47.600 27.2 58.800 42.1 88.900
800 19.6 48.600 24.5 60.200 30.6 74.500 47.4 112.700
900 22.0 61.200 27.6 76.300 34.4 94.200 53.3 142.500
1000 24.5 75.800 30.6 93.900 38.2 116.300 59.3 176.100
Material PE 100 PE
Pipes
Colour blue ~ RAL 5005
Dimensions DIN 8074,
standard length: 6 m
Remark terms of delivery on request,
other lengths on request
DIBt
approved
20 1.9 0.113
25 2.3 0.172
32 1.9 0.189 2.9 0.274
40 2.4 0.298 3.7 0.433
50 3.0 0.457 4.6 0.672
63 3.8 0.727 5.8 1.060
75 4.5 1.020 6.8 1.480
90 5.4 1.470 8.2 2.140
110 6.6 2.180 10.0 3.170
125 7.4 2.780 11.4 4.110
140 8.3 3.490 12.7 5.120
160 9.5 4.560 14.6 6.720
180 10.7 5.760 16.4 8.490
200 11.9 7.110 18.2 10.500
225 13.4 9.010 20.5 13.300
250 14.8 11.000 22.7 16.300
280 16.6 13.900 25.4 20.400
315 18.7 17.600 28.6 25.800
355 21.1 22.300 32.2 32.800
400 23.7 28.200 36.3 41.600
450 26.7 35.700 40.9 52.700
500 29.7 44.200 45.4 65.100
560 33.2 55.300 50.8 81.500
630 37.4 70.000 57.2 103.200
710 42.1 88.900
800 47.4 112.700
900 53.3 142.500
1000 59.3 176.100
PE Material PE 100
Pipes
Colour black with brown stripes – for waste water
blue – for drinking water
Dimensions DIN 8074
standard length: 100 m
Remark our injection moulded fittings up to d 160 mm are also
approved by DVGW, registration no.:
DV-8601AR2079, DV-8601AR2080, DV-8601AR2081
DVGW-registration no. by external certification for drinking
water: DW-8136AU2235, DW-8141AU2236, DW-8146AU2237
Material PE 80 PE
Pipes
Colour black
Dimensions DIN 8074, DIN 19537 part 1
standard length: 6 m, also in 12 m length
Remark terms of delivery on request,
other lengths on request,
in case of an order statics data according
to ATV A 127 can be issued with charge
DIBt
approved
Pressure pipe SDR 41 SDR 33 SDR 26 SDR 17,6 SDR 11 SDR 7,4
d e e e e e e
mm mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m
10 1.8 0.051
12 1.8 0.064
16 1.8 0.084
20 1.8 0.107 1.9 0.112
25 1.8 0.138 2.3 0.171
32 1.8 0.179 2.9 0.271
40 1.8 0.227 2.3 0.285 3.7 0.427
50 2.0 0.314 2.9 0.441 4.6 0.666 6.9 0.936
63 2.0 0.399 2.5 0.495 3.6 0.688 5.8 1.050 8.6 1.470
75 1.9 0.457 2.3 0.551 2.9 0.675 4.3 0.977 6.8 1.470 10.3 2.090
90 2.2 0.640 2.8 0.791 3.5 0.978 5.1 1.390 8.2 2.120 12.3 3.000
110 2.7 0.942 3.41 1.170 4.21 1.430 6.3 2.080 10.0 3.150 15.1 4.490
125 3.1 1.230 3.91 1.510 4.81 1.840 7.11 2.660 11.4 4.080 17.1 5.780
140 3.5 1.550 4.31 1.880 5.41 2.320 8.01 3.340 12.7 5.080 19.2 7.250
160 4.0 2.000 4.91 2.420 6.21 3.040 9.1 4.350 14.6 6.670 21.9 9.440
180 4.4 2.480 5.5 3.070 6.9 3.790 10.21 5.480 16.4 8.420 24.6 11.900
200 4.9 3.050 6.21 3.840 7.7 4.690 11.4 6.790 18.2 10.400 27.4 14.800
225 5.5 3.860 6.91 4.780 8.61 5.890 12.81 8.550 20.5 13.100 30.8 18.600
250 6.2 4.830 7.71 5.920 9.6 7.300 14.2 10.600 22.7 16.200 34.2 23.000
280 6.9 5.980 8.61 7.400 10.71 9.100 15.91 13.200 25.4 20.300 38.3 28.900
315 7.7 7.510 9.71 9.370 12.1 11.600 17.9 16.700 28.6 25.600 43.1 36.500
355 8.7 9.550 10.91 11.800 13.61 14.600 20.11 21.200 32.2 32.500 48.5 46.300
400 9.8 12.100 12.3 15.100 15.3 18.600 22.7 26.900 36.3 41.300 54.7 58.800
450 11.0 15.200 13.81 19.000 17.21 23.500 25.51 34.000 40.9 52.300 61.5 74.400
500 12.3 19.000 15.3 23.400 19.1 28.900 28.4 42.000 45.4 64.500
560 13.7 23.600 17.21 29.400 21.41 36.200 31.71 52.500 50.8 80.800
630 15.4 29.900 19.31 37.100 24.11 45.900 35.71 66.500 57.2 102.400
710 17.4 38.000 21.81 47.200 27.21 58.400 40.21 84.400
800 19.6 48.100 24.51 59.700 30.61 73.900 45.31 107.100
900 22.0 60.700 27.61 75.600 34.41 93.400 51.0 135.500
1000 24.5 75.200 30.61 93.100 38.21 115.300 56.7 167.400
32 2.9 0.282
40 3.7 0.447
50 4.6 0.694
63 3.6 0.717 5.8 1.100
75 4.3 1.020 6.8 1.530
90 5.1 1.450 8.2 2.210
110 6.3 2.170 10.0 3.280
125 7.1 2.780 11.4 4.250
140 8.0 3.480 12.7 5.290
160 9.1 4.530 14.6 6.950
180 10.2 5.710 16.4 8.780
200 11.4 7.070 18.2 10.800
225 12.8 8.910 20.5 13.700
250 14.2 11.000 22.7 16.800
280 15.9 13.800 25.4 21.100
315 17.9 17.400 28.6 26.700
355 20.1 22.100 32.2 33.900
400 22.7 28.000 36.3 43.000
450 25.5 35.400
500 28.4 43.800
560 31.7 54.700
630 35.7 69.300
50 40 3.0 0.453
56 50 3.0 0.512
63 50 3.0 0.580
75 70 2.9 0.695
110 100 3.4 1.170 4.2 1.430
125 125 3.9 1.510 4.8 1.840
160 150 4.9 2.420 6.2 3.040
200 200 6.2 3.840 7.7 4.690
250 250 7.7 5.920 9.6 7.300
315 300 9.7 9.370 12.1 11.600
DIBt
approved
Pressure pipe SDR 41 SDR 33 SDR 26 SDR 17.6 SDR 11 SDR 7.4
d e e e e e e
mm mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m
10 1.8 0.046
12 1.8 0.057
20 1.9 0.107
25 1.8 0.132 2.3 0.164 3.5 0.230
32 1.8 0.171 2.9 0.259
40 1.8 0.217 2.3 0.273 3.7 0.411
50 1.8 0.275 2.0 0.300 2.9 0.422 4.6 0.638 6.9 0.896
63 1.8 0.349 2.0 0.382 2.5 0.474 3.6 0.659 5.8 1.010 8.6 1.410
75 1.9 0.438 2.3 0.528 2.9 0.647 4.3 0.935 6.8 1.400 10.3 2.010
90 2.2 0.613 2.8 0.758 3.5 0.936 5.1 1.330 8.2 2.030 12.3 2.870
110 2.7 0.903 3.4 1.130 4.2 1.370 6.3 1.990 10.0 3.010 15.1 4.300
125 3.1 1.180 3.9 1.450 4.8 1.760 7.1 2.550 11.4 3.910 17.1 5.530
140 3.5 1.480 4.3 1.800 5.4 2.230 8.0 3.200 12.7 4.870 19.2 6.950
160 4.0 1.910 4.9 2.320 6.2 2.920 9.1 4.170 14.6 6.390 21.9 9.040
180 4.4 2.380 5.5 2.940 6.9 3.630 10.2 5.250 16.4 8.070 24.6 11.400
200 4.9 2.920 6.2 3.680 7.7 4.500 11.4 6.500 18.2 9.950 27.4 14.100
225 5.5 3.700 6.9 4.570 8.6 5.650 12.8 8.190 20.5 12.600 30.8 17.900
250 6.2 4.630 7.7 5.670 9.6 6.990 14.2 10.100 22.7 15.500 34.2 22.100
280 6.9 5.730 8.6 7.090 10.7 8.720 15.9 12.600 25.4 19.400 38.3 27.600
315 7.7 7.190 9.7 8.970 12.1 11.100 17.9 16.000 28.6 24.600
355 8.7 9.140 10.9 11.300 13.6 14.000 20.1 20.300 32.2 31.200
400 9.8 11.600 12.3 14.400 15.3 17.800 22.7 25.700 36.3 39.600
450 11.0 14.700 13.8 18.200 17.2 22.500 25.5 32.500 40.9 50.100
500 12.3 18.200 15.3 22.400 19.1 27.700 28.4 40.200 45.4 62.800
560 13.7 22.600 17.2 28.200 21.4 34.700 31.7 50.300
630 15.4 28.600 19.3 35.600 24.1 44.000 35.7 63.700
710 17.4 36.400 21.8 45.200 27.2 55.900 40.2 80.800
800 19.6 46.100 24.5 57.200 30.6 70.800 45.3 102.600
900 22.0 58.300 27.6 72.500 34.4 89.500
1000 24.5 72.000 30.6 89.200 38.2 111.400
DIBt
approved
16 1.9 0.164
20 1.9 0.210
25 1.9 0.269
32 2.4 0.434
40 2.4 0.554
50 3.0 0.844
63 2.0 0.748 3.0 1.090
75 2.3 1.030 3.6 1.550
90 2.8 1.480 4.3 2.220
110 3.4 2.200 5.3 3.330
125 3.9 2.840 6.0 4.250
140 4.3 3.520 6.7 5.310
160 4.9 4.540 7.7 6.960
180 5.5 5.740
200 6.2 7.190
225 6.9 8.950
250 7.7 11.100
280 8.6 13.900
315 9.7 17.600
Pipe
d e
mm mm ~ kg/m
32 3.0 0.279
40 3.0 0.356
50 3.0 0.453
63 3.0 0.580
75 3.0 0.696
90 3.0 0.841
110 3.0 1.040
125 3.0 1.180
140 3.0 1.330
160 3.0 1.520
180 3.0 1.710
200 3.0 1.910
225 3.5 2.510
250 3.5 2.790
280 4.0 3.540
315 5.0 4.940
355 5.0 5.580
400 6.0 7.520
450 7.0 9.840
500 8.0 12.500
560 8.0 14.000
630 10.0 19.600
10 1.2 0.054
12 1.0 0.055 1.4 0.073
16 1.2 0.090 1.8 0.124
20 1.5 0.138 2.3 0.197
25 1.5 0.175 1.9 0.213 2.8 0.296
32 1.8 0.265 2.4 0.344 3.6 0.485
40 1.9 0.353 3.0 0.529 4.5 0.756
50 1.8 0.426 2.4 0.556 3.7 0.815 5.6 1.170
63 1.9 0.567 3.0 0.860 4.7 1.300 7.0 1.830
75 1.8 0.647 2.2 0.787 3.6 1.230 5.6 1.830 8.4 2.620
90 1.8 0.780 2.7 1.140 4.3 1.760 6.7 2.620 10.0 3.730
110 2.2 1.170 3.2 1.650 5.3 2.630 8.2 3.920 12.3 5.610
125 2.5 1.490 3.7 2.150 6.0 3.360 9.3 5.050
140 2.8 1.850 4.1 2.670 6.7 4.210 10.4 6.310
160 3.2 2.430 4.7 3.470 7.7 5.520 11.9 8.230
180 3.6 3.040 5.3 4.400 8.6 6.930 13.4 10.400
200 4.0 3.730 5.9 5.410 9.6 8.580
Pressure Pipe PU1 SDR 51 SDR 34.3 SDR 21 SDR 13.5 SDR 9
d e e e e e
mm mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m mm ~ kg/m
6 10 1.0 0.025
8 10 1.0 0.034
10 10 1.2 0.052
12 10 1.0 0.053 1.4 0.071
16 10 1.2 0.088
20 5 1.5 0.134
25 5 1.5 0.170 1.9 0.207
32 4 1.8 0.258 2.4 0.334
40 4 2.0 0.358 3.0 0.514
50 4 1.8 0.414 2.4 0.540 3.7 0.792
63 3 1.8 0.525 3.0 0.836 4.7 1.260
75 3 1.8 0.629 3.6 1.190
90 2 1.8 0.758 4.3 1.710
110 2 2.2 1.130 5.3 2.560
125 1 2.5 1.450
140 1 2.8 1.800
160 1 3.2 2.360 4.7 3.370
1 PU = packing unit
16 1.9 0.155
20 1.9 0.199
25 1.9 0.255
32 2.4 0.412
40 2.4 0.526
50 3.0 0.806
63 3.0 1.030
75 3.6 1.470
90 4.3 2.210
110 5.3 3.160
125 6.0 4.030
140 6.7 5.040
160 7.7 6.610
PE SDR-class d Material
Fittings
Elbows 90° SDR 171 50 – 315 mm PE 100
injected SDR 11 20 – 315 mm PE 100
PE SDR-class d Material
Fittings
Bends 90° SDR 33 110 – 400 mm PE 100
injected, r=d SDR 17,6 50 – 400 mm PE 100
SDR 11 20 – 400 mm PE 100
PE SDR-class d Materials
Fittings
Inspection tees 90° SDR 33 110 – 630 mm PE 80 · PE 1001
segment welded SDR 17 110 – 630 mm PE 1001
(pressure reduction SDR 17,6 110 – 630 mm PE 80
factor 0,65) SDR 11 110 – 250 mm PE 80 · PE 1001
SDR-class d Materials PE
Fittings
Electro fusion sockets-pressure 20 – 710 mm PE 100
for piping systems SDR 17
up to SDR 11
in PE 100 on request:
tees with integrated heating coils
elbows 90°/45° with integrated heating coils
reducers concentric with integrated heating coils
end caps with integrated heating coils
Accessories
Restraining clamp for pipes d 25 – 63 mm, d 63 – 180 mm, d 63 – 355 mm
PP SDR-class d Material
Fittings
Elbows 90° SDR 11 20 – 315 mm PP-H 100 AlphaPlus
injected
Bends 90°, 60°, 45°, 30° SDR 11 32 – 315 mm PP-H 100 AlphaPlus
seamless formed, r ~ 1,5 d
other dimensions and radius
on request
Bends 90°, 60°, 45°, 30° SDR 17,6 90 – 800 mm PP-H 100 AlphaPlus
segment welded, SDR 11 90 – 500 mm PP-H 100 AlphaPlus
r ~ 1,5 d
Tees with reduced branch SDR 17,6 63/50 – 315/250 mm PP-H 100 AlphaPlus
injected SDR 11 63/50 – 315/250 mm PP-H 100 AlphaPlus
Remark: For production reasons, some sizes are also manufactured in PP-R 80.
SDR-class d Material
Electro fusion sockets 20 – 225 mm PP-H 100 AlphaPlus
for piping systems
SDR 17,6 up to SDR 11
PP SDR-class d Material
Fittings
Bends 90° SDR 33 110 – 400 mm PP-H 100 AlphaPlus
injected, r = d SDR 17,6 50 – 400 mm PP-H 100 AlphaPlus
SDR 11 20 – 400 mm PP-H 100 AlphaPlus
Tees with reduced branch SDR 17,6 90/50 – 630/450 mm PP-H 100 AlphaPlus
saddle mounted, swept SDR 11 90/50 – 500/355 mm PP-H 100 AlphaPlus
(pressure reduction factor 0,75)
Branches 60°, 45° SDR 17,6 110 – 630 mm PP-H 100 AlphaPlus
segment welded SDR 11 110 – 500 mm PP-H 100 AlphaPlus
(pressure reduction
factor 0,50)
Remark: For production reasons, some sizes are also manufactured in PP-R 80.
PP
SDR-class d Material
Fittings
Inspection tees 90° SDR 17,6 110 – 630 mm PP-H 100 AlphaPlus
segment welded SDR 11 110 – 250 mm PP-H 100 AlphaPlus
(pressure reduction
factor 0,65)
Inspection tees 60° SDR 17,6 110 – 400 mm PP-H 100 AlphaPlus
segment welded SDR 11 110 – 400 mm PP-H 100 AlphaPlus
(pressure reduction
factor 0,50)
Remark: For production reasons, some sizes are also manufactured in PP-R 80.
Stub flanges for socket welding PN 12,5 20 – 110 mm PP-H 100 AlphaPlus
for loose flanges JIS
injected
PP/Steel Profiled loose flanges drilled acc. to ISO/DIN PN 10/16 50 – 180 mm PP/Steel
drilled acc. to ISO/DIN PN 16 200 – 400 mm PP/Steel
drilled acc. to ISO/DIN PN 10 20 – 630 mm PP/Steel
Gaskets
Flat gaskets SDR 17 50 – 1000 mm EPDM
for stub flanges SDR 11 20 – 630 mm EPDM
Accessoires
Pipe clamps
injected, without clip 16 – 32 mm PP
injected, with clip 40 – 160 mm PP
PP Filling blocks
for pipe clamps Type A/Type B 16 – 160 mm PP
Gaskets
Flat gaskets for stub flanges for socket welding PN 16 20 – 110 mm FPM
FPM up to 10 bar
Unions PN 16 16 – 63 mm PVDF
injected
with FPM gasket
Butterfly valves
adjustment in increments Ventilation series 50 – 315 mm PPs1
infinitesimal adjustment Ventilation series 50 – 400 mm PPs1
Remark: For detailed information please ask for our special catalogues.
Pipes and components are also available in electrically conductive version (PE-EL).
PP d Gasket/diaphragm Connections
Valves
2-way ball valve 20 – 110 mm PTFE/EPDM IM, DM, FM, MM, EM, OM ISO
20 – 110 mm PTFE/FPM IM, DM, FM, MM, EM, OM ISO
Key
Connections
IM = female fusion ends ISO/DIN VSS = union ends with male butt
DM = male socket fusion ends ISO/DIN fusion end insert
FM = thread sockets with cyl. threaded female VSM = union ends with female fusion
ends R end insert
MM = PP butt fusion ends SDR 11 elongated EF = with male IR-/butt fusion ends
EM = PE 80 butt fusion ends SDR 11 elongated SDR 21
OM ISO = PP/Steel Loose flanges drilled acc. to
ISO/DIN 2501
Pressure 10 bar max. for SDR 11, Type Z411 Type Z414
Valves
6 bar max. for SDR 17/17,6
Nominal DN 50 – DN 600
diameter
Connection PN 10 acc. to ISO/DIN 2501
Remark Valve geometry is specially adapted to pipes
made of PE and PP. There are no stub
flanges that have to be machined.
SDR-class d Body
Butterfly valve type Z411 SDR 17/17,6 63 – 630 mm aluminium, GGG 40
interposed flange valve SDR 11 63 – 630 mm aluminium, GGG 40
We supply a full range of acces- For ball valves For further details about our
sories for the various valves and Ball valve brackets range of valves, please refer to
types of connection. Inserts for connections our Gross Price List.
PP/PVDF
You will find further information to our products and services in the
following publications:
The publications marked with · are available in English.
sites construction
Ventilation pipes
SIMONA UK LIMITED · Telford Drive · Brookmead Industrial Park · GB - Stafford ST16 3ST
Phone +44 (0) 17 85 22 24 44 · Fax +44 (0) 17 85 22 20 80
mail@simona-uk.com · www.simona.de
SIMONA AG · Teichweg 16 · D - 55606 Kirn · Phone +49 (0) 67 52 14 - 0 · Fax +49 (0) 67 52 14 -211
mail@simona.de · www.simona.de