Professional Documents
Culture Documents
CONDUCTOR
Answer:
Often used in power devices where its losses are significantly lower and operating
temperatures can be higher than those of silicon based devices.
c. silicon carbide
Answer: Doping
The smallest particle of an element that possesses the unique characteristics of that element.
The correct answer is: atom
a.carbon
Related to the bonding of two or more atoms by the interaction of their valence electrons.
The correct answer is: covalent
An electron that has acquired enough energy to break away from the valance band of the
parent atom, also called a conduction electron.
The correct answer is: free electron
P Type
There is a shortage of electrons inAnswer semiconductor
Failure point is a condition caused by break, bending, or collapse so that a structure or
structural element can no longer fulfill its purpose.
Question 2
point at which the deformation is no longer directly proportional to the applied force
Question 3
reducing material volume by the application of pressure
Question 4
Change in the length of an object in some direction per unit.
Question 5
Law that states: stress of a solid is directly proportional to the strain applied to it.
Question 6
These test methods are used to examine an object, material, or system causing
permanent damage to its usefulness.
The correct answer is: destructive testing
Question 7
A force with its resultant passing through the centroid of a particular section and being
perpendicular to the plane of the section.
Question 9
It is the maximum stress that a material will withstand without permanent deformation.
Question 12
Nominal stress developed in a material at rupture.
Question 13
A condition of a string, wire, or rod that is stretched between two points.
Question 14
The force acting across a unit area in a solid material resisting the separation,
compacting, or sliding that tends to be induced by external forces.
The correct answer is: stress
Question 15
equal to the body's time rate of change in momentum.
The correct answer is: force
Question 16
Correct
Any alteration of shape or dimensions of a body caused by thermal expansion or
contraction, stresses, chemical or metallurgical transformations, or shrinkage and
expansions due to moisture change.
Question 17
Mechanical property of a material that indicates the ability of the material to handle
overloading before it fractures.
The correct answer is: toughness
Question 18
These test methods are used to examine an object, material, or system without
impairing its future usefulness.
Question 19
It is the loss of material's load-bearing ability under repeated load application, as
opposed to a single load.
The correct answer is: fatigue
Question 20
is a fractional increase in a material's length due to thermal expansion or stress in
tension.