Professional Documents
Culture Documents
Exam Guidelines:
Students can open exam problems at the determined time and get the designated problems based on
numbers on the examinee list.
Students write answers on A4/Folio papers and name and student ID on top right by using ballpoint/pen
(not pencil)
Students must write this statement, “I declare truly and honestly that all written answers are my works
without helps from others,” on the last page and put a sign on it.
Students must scan all answers in PDF/image format files and upload the scanned files before the end of
the exam.
Students can send through other platforms if they fail to upload by including screenshot proof of failure
(contact the lecture to confirm this issue).
1. (30%) A pair of parallel plates in a vacuum has a rectangular area with a length of 10 cm. The distance
between the two plates is 4 mm.
a. Make a sketch and find the capacitance!
b. If a dielectric material with dielectric constant k=2 and dimension of 10 cm x 10 cm x 4 mm is in between
two plates, make the capacitor sketch and find capacitance!
c. If the same dielectric material with 10 cm x 10 cm x 3 mm is located between the plates and attached to
one of the plates, make the capacitor sketch and find the stored energy if 10 kV voltage different applied!
3. (30%) A certain elastic conducting material is stretched into a circular loop of 10 cm radius. It is placed
with its plane perpendicular to a uniform 9,7 T magnetic field. When released, the radius of the loop
starts to shrink at an instantaneous rate of 287,1 cm/s.
a. Berapa besar induksi emf/ggl pada loop tersebut?
b. If the obtained induced emf is 6.1246 V, what is the loop radius when other variables are the same?
Faculty of Engineering, Universitas Indonesia
4. (20%) An AC voltage source has rms voltage 220 V and frequency 50 Hz connected to an LR circuit in serial.
a) What is the rms current if the resistance R = 3,3 kΩ and inductance L = 300 mH?
b) What are the rms different voltages at R and L?
5. (30%) A pair of parallel plates in a vacuum has a rectangular area with a length of 12 cm. The distance between
the two plates is 4.5 mm.
a) Make a sketch and find the capacitance!
b) If a dielectric material with dielectric constant k=3.4 and the dimension of 12 cm x 6 cm x 4.5 mm
is between two plates, make the capacitor sketch and find capacitance!
c) For the capacitor as mentioned on (b), what is the stored energy if 10 kV voltage different applied!
7. (30%) A capacitor with C = 590 µF is connected in series with an inductor L = 0,33 H (ignore the
resistance). When the inductor current is equal to 2.5 A, the current speed di/dt is equal to 89 A/s.
Along with the oscillation:
a) What is the maximum voltage on the capacitor?
b) What is the maximum voltage on the inductor, and when does it occur?