Professional Documents
Culture Documents
Introduction:
Hammers and impact wrenches are commonly used to fix the nails. They produce a high impact force in a
relatively short period of time to fix the nails.
Objective:
The objective of the project is to design and build a working model of nail fixing mechanism (Impact
Mechanism) by efficiently using either of slider-crank, gears, cam-follower mechanisms, etc. or
combination of these mechanisms.
Students are required to carefully select lengths of various links of the mechanism so that uniform motion
among various parts/links is possible (Synthesis)
Specifications and Constraints:
Standards:
When standard parts (for example: nut bolts, screws, bearings, gears, nails, etc.) and materials are used
mention the relevant standard.
Task # 1:
Submit a project design report on the design of the mechanism. The report must consist of the following
sections:
Objective
Design Specifications, Constraints and Standards
Design Methodology: Design calculations (Kinematic analysis: Position, velocity and acceleration)
and dimensions (Synthesis analysis) of various links, number and types of joints, links and types of
pairs must be clearly mentioned.
Neat and clear sketches of all parts of model.
Include various pictures of your manufactured product.
References must be properly written at the end of report.
Task # 2:
You are required to manufacture a miniature model as per design calculations and constraints
System/Design Verification: All parts should be assembled and tested. Model should be DC motor
driven. Make small video of the final working model (not more than 1 min long) and upload along
with your project report