Professional Documents
Culture Documents
PROJECT #1
DESIGN OF A TRANSMISSION SYSTEM FOR TRUCK
ON CRANE RAIL
Data No.: ____
System components:
1. Electric motor 2. Flexible shaft coupling 3. 1-stage spur gear reducer
4. Straight spur gear transmission 5. Crane rail 6. Wheel
Design data:
Rail resistance, F (N): __________ one-direction working, 2 shifts per working day
Tangential velocity, v (m/s): __________ ( 300 working days/year, 8-hour shift)
Wheel diameter, D (mm): __________
Service life, L (years): __________
PROJECT DATA #1
Data No. 1 2 3 4 5 6 7 8 9 10
F (N) 1800 1900 4500 3100 2400 2700 2200 3800 4000 4300
v (m/s) 1.0 1.34 1.75 2 1.4 1.87 2.2 2.4 2.3 1.12
D (mm) 200 300 400 200 400 500 600 650 500 300
L (years) 5 6 6 7 6 7 5 6 7 6
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense
HCMC UNIVERSITY OF TECHNOLOGY - VNU HCM
FACULTY OF MECHANICAL ENGINEERING
DEVISION OF MACHINE DESIGN
PROJECT #2
DESIGN OF A TRANSMISSION SYSTEM FOR BELT CONVEYOR
Data No.: ____
System components:
1. Electric motor 2. V-belt drive 3. 1-stage helical spur gear reducer
4. Flexible chain coupling 5. Belt conveyor roller 6. Belt conveyor
Design data:
Tangential force on belt conveyor, F (N): __________ one-direction working, 2 shifts per
Tangential velocity on belt conveyor, v (m/s): ________ working day
Diameter of drive conveyor pulley, D (mm): __________ ( 300 working days/year, 8-hour shift)
Service life, L (years): __________
PROJECT DATA #2
Data No. 1 2 3 4 5 6 7 8 9 10
F (N) 3150 4000 2450 3800 4480 5120 2850 3950 4750 5000
v (m/s) 0.9 1.0 0.8 0.8 0.9 1.0 1.1 1.2 1.3 1.0
D (mm) 225 250 200 225 200 250 275 250 275 275
L (years) 5 6 6 7 6 7 5 6 7 6
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense
HCMC UNIVERSITY OF TECHNOLOGY - VNU HCM
FACULTY OF MECHANICAL ENGINEERING
DEVISION OF MACHINE DESIGN
PROJECT #3
DESIGN OF A TRANSMISSION SYSTEM FOR THE ROTARY BARREL OF
REMOVING STAMPING BURRS
Data No.: ____
System components:
1. Electric motor 2. V-belt drive 3. 1-stage helical spur gear reducer
4. Chain coupling 5. Rotary barrel
Design data:
Tangential force on rotary barrel, F (N): __________ one-direction working, 2 shifts per
Tangential velocity on rotary barrel, v (m/s): __________ working day
Diameter of rotary barrel, D (mm): __________ ( 300 working days/year, 8-hour shift)
Service life, L (years): __________
PROJECT DATA #3
Data No. 1 2 3 4 5 6 7 8 9 10
F (N) 1200 1300 1500 1600 1700 1800 2000 2100 2300 2500
v (m/s) 3 4 2 3 3.5 3 3.5 2.8 2.6 3
D (mm) 400 450 500 550 600 650 700 750 800 850
L (years) 5 6 6 7 6 7 5 6 7 6
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense
HCMC UNIVERSITY OF TECHNOLOGY - VNU HCM
FACULTY OF MECHANICAL ENGINEERING
DEVISION OF MACHINE DESIGN
PROJECT #4
DESIGN OF A TRANSMISSION SYSTEM FOR THE EXTRUSION MACHINE
Data No.: ____
System components:
1. Electric motor 2. V-belt drive 3. 1-stage helical spur gear reducer
4. Flexible shaft coupling 5. Material hopper 6. Spiral screw
Design data:
Tangential force on screw impeller, F (N): __________ one-direction working, 2 shifts per
Tangential velocity on screw impeller, v (m/s): __________working day
Diameter of screw impeller, D (mm): __________ ( 300 working days/year, 8-hour shift)
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense
HCMC UNIVERSITY OF TECHNOLOGY - VNU HCM
FACULTY OF MECHANICAL ENGINEERING
DEVISION OF MACHINE DESIGN
PROJECT #5
DESIGN OF A TRANSMISSION SYSTEM FOR CHAIN CONVEYOR
Data No.: ____
System components:
1. Electric motor 2. V-belt drive 3. 1-stage helical spur gear reducer
4. Flexible shaft coupling 5. Chain conveyor sprocket 6. Chain conveyor
Design data:
Tangential force on conveyor chain, F (N): __________ one-direction working, 2 shifts per
Tangential velocity on conveyor chain, v (m/s): __________working day
Pitch of conveyor chain, p (mm): __________ ( 300 working days/year, 8-hour shift)
Number of teeth of the drive conveyor sprocket, z : __________
Service life, L (years): __________
PROJECT DATA #5
Data No. 1 2 3 4 5 6 7 8 9 10
F (N) 4500 6300 7300 6600 10300 11200 8400 9500 12300 7800
v (m/s) 0.6 0.8 0.9 0.6 0.6 0.6 0.55 0.6 0.65 0.5
p (mm) 80 100 100 80 100 80 100 80 90 100
z (teeth) 7 7 9 7 8 9 7 7 8 9
L (years) 5 6 6 7 6 7 5 6 7 6
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense
HCMC UNIVERSITY OF TECHNOLOGY - VNU HCM
FACULTY OF MECHANICAL ENGINEERING
DEVISION OF MACHINE DESIGN
PROJECT #6
DESIGN OF A TRANSMISSION SYSTEM FOR TOWING WINCH
Data No.: ____
System components:
1. Electric motor 2. V-belt drive 3. 1-stage helical spur gear reducer
4. Flexible shaft coupling 5. Winch roller
Design data:
Tangential force on winch roller, F (N): __________ one-direction working, 2 shifts per
Tangential velocity on winch roller, v (m/s): __________ working day
Diameter of winch roller, D (mm): __________ ( 300 working days/year, 8-hour shift)
Tilt angle of V-Belt drive, θ °: __________
Service life, L (years): __________
PROJECT DATA #6
Data No. 1 2 3 4 5 6 7 8 9 10
F (N) 5500 3600 6700 4900 8000 12400 15000 12000 7800 4200
v (m/s) 0.25 0.3 0.35 0.42 0.4 0.33 0.35 0.4 0.47 0.55
D (mm) 100 120 125 130 135 100 125 140 145 130
45 60 30 45 20 15 35 40 30 60
L (years) 5 6 6 7 6 7 5 6 7 6
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense
HCMC UNIVERSITY OF TECHNOLOGY - VNU HCM
FACULTY OF MECHANICAL ENGINEERING
DEVISION OF MACHINE DESIGN
PROJECT #7
DESIGN OF A TRANSMISSION SYSTEM FOR A HANGING BARREL
Data No.: ____
System components:
1. Electric motor 2. Flexible shaft coupling 3. 1-stage helical spur gear reducer
4. Roller chain drive 5. Chain conveyor 6. Chain tensioner 7. Hanging crate
8. Loads
Design data:
Tangential force on conveyor chain, F (N): __________ one-direction working, 2 shifts per
Tangential velocity on conveyor chain, v (m/s): __________working day
Pitch of conveyor chain, p (mm): __________ ( 300 working days/year, 8-hour shift)
Number of teeth of the drive conveyor sprocket, z : __________
Service life, L (years): __________
PROJECT DATA #7
Data No. 1 2 3 4 5 6 7 8 9 10
F (N) 2200 3300 1100 1500 2500 3500 1300 2400 4000 3000
v (m/s) 1 1.1 1.1 0.9 1.3 1.4 1.5 1.6 1.7 0.8
p (mm) 80 100 100 80 100 80 100 80 90 100
z (teeth) 7 8 9 10 11 9 10 7 8 9
L (years) 5 6 6 7 6 7 5 6 7 6
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense
HCMC UNIVERSITY OF TECHNOLOGY - VNU HCM
FACULTY OF MECHANICAL ENGINEERING
DEVISION OF MACHINE DESIGN
PROJECT #8
DESIGN OF A TRANSMISSION SYSTEM FOR CHAIN CONVEYOR
Data No.: ____
System components:
1. Electric motor 2. Flexible shaft coupling 3. 1-stage helical spur gear reducer
4. Roller chain drive 5. Chain conveyor 6. Chain tensioner
Design data:
Tangential force on conveyor chain, F (N): __________ one-direction working, 2 shifts per
Tangential velocity on conveyor chain, v (m/s): __________working day
Pitch of conveyor chain, p (mm): __________ ( 300 working days/year, 8-hour shift)
Number of teeth of the drive conveyor sprocket, z : __________
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense
HCMC UNIVERSITY OF TECHNOLOGY - VNU HCM
FACULTY OF MECHANICAL ENGINEERING
DEVISION OF MACHINE DESIGN
PROJECT #9
DESIGN OF A TRANSMISSION SYSTEM FOR INDUSTRIAL BLENDER
Data No.: ____
System components:
1. Electric motor 2. Flexible shaft coupling 3. 1-stage bevel gear reducer
4. Roller chain drive 5. Blender
Design data:
Power on blender shaft, P (kW): ______________
Rotation speed of blender shaft, n (rpm): __________
Service life, L h = 10000 (hours)
Static loading.
PROJECT DATA #9
Data No. 1 2 3 4 5 6 7 8 9 10
P (kW) 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
n (rpm) 170 165 175 190 195 200 220 232 155 160
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense
HCMC UNIVERSITY OF TECHNOLOGY - VNU HCM
FACULTY OF MECHANICAL ENGINEERING
DEVISION OF MACHINE DESIGN
PROJECT #10
DESIGN OF A TRANSMISSION SYSTEM FOR ROTARY DRYING BARREL
Data No.: ____
System components:
1. Electric motor 2. V-belt drive 3. 1-stage helical spur gear reducer
4. Spur gear drive 5. Drying barrel 6,7: Rollers 8: Feed hopper
Design data:
Power on drying barrel, P (kW): __________ Rotation
speed of drying barrel, n (rpm): __________ Service
life, Lh = 8000 (hours)
Static loading.
PROJECT DATA #10
Data No. 1 2 3 4 5 6 7 8 9 10
P (kW) 2.5 3.0 3.5 4.5 5.0 4.5 4.0 3.5 3.0 2.5
n (rpm) 28 24 20 22 26 28 26 24 22 24
IMPLEMENTATION PROGRESS:
Week Content
Receive topics, disseminate project content.
1-2 Learn the transmission system.
Determine engine power and gear ratio distribution.
Design machine elements: design drives system, shafts ; select keys, bearings, shaft
2-4 coupling, housing of the speed reducer, bolts/screws and other parts of the
transmission system
5-6 Draw a manual drafting and complete representations of machine structures on it.
5-7 Select assembly fits and tolerances.
7-11 Complete A0 assembly drawings for reducer and transmission system.
Draw A3 detail drawings and complete design documents (report and drawings).
11-12
The instructor signs for approval.
16 Defense