Professional Documents
Culture Documents
Mod 17
Mod 17
Answer:c
Answer:b
a) minor repairs
b)no repairs
c) no decals fitted
Answer:b
a) no repairs
Answer:b
5. Composite propellers may have minor repairs carried outby
a) the operator
Answer:c
a) Airworthiness Notice 75
b)the AMM
c) Airworthiness Notice 55
Answer:a
Answer:b
Answer:b
9. The tip clearance of a sea plane is
a) 9 inches
b)1 inch
c) 18 inches
Answer:c
Answer:c
Exam-2
c) a vibration analyser
Answer:c
Answer:a
3. A metal propeller may be statically balanced by
Answer:c
a) assists CTM
b)opposes CTM
Answer:a
a) lock out the course pitch oil line in the event of underspeeding
c) lock out the fine pitch oil line in the event of overspeeding
Answer:c
Answer:c
7. A conventional turboprop torque meter uses
Answer:a
Answer:c
b)low power settings with higher than normal pitch setting for
ground manoeuvres
c) high power settings with higher than normal pitch settings when
in flight
Answer:b
checks for
Answer:a
a) 2 - 4 degrees
b)6 - 10 degrees
c) 15 degrees
Answer:a
Answer:a
a) fine off
b)coarsen off
Answer:a
b)is due to the power stroke of the engine and may have a more
Answer:b
Answer:c
a) viewing the blade and observing ice falling off the blade
Answer:b
a) for protection
b)for Anti-icing
c) for balancing
Answer:a
Answer:c
Answer:b
Answer:a
Answer:a
Answer:a
Answer:a
a) in flight
Answer:c
b)ATM
c) CTM
Answer:c
6. When on the ground with the engine idling the prop control
should be
Answer:c
Answer:b
a) feather
b)coarse
c) fine
Answer:c
c) RPM
Answer:c
Answer:a
1. Synchronisation is used to
Answer:b
a) ATM
b)centrifugal force acting on the counterweight
c) engine oil
Answer:c
Answer:b
c) at a steeper angle
Answer:c
a) 18 inches
b) 9 inches
c) 1/2 inch
Answer:c
Answer:c
a) 2 Opposite blades
b) 2 Adjacent blades
c) any 2 blades
Answer:c
a) to increase thrust
Answer:c
b)never removed
Answer:a
10. Low torque sensing is used to
a) increase power
b)increase pitch
c) initiate auto-feather
Answer:c
a) declared unserviceable
Answer:a
c) on the Ground
Answer:b
a) low
b)high
a) overspeed
b)underspeed
c) onspeed
Answer:a
a) relative airflow
b)propeller shaft
c) plane of rotation
Answer:c
6. Synchronisation is used
a) in flight
c) on the ground
Answer:b
a) increasing drag
Answer:b
Answer:b
Answer:c
c) deposits formed due to the wear of slip ring and brush gear
assembly
Answer:a
This is exam number 7.
a) blade flutter
c) blade distortion
Answer:a
a) In cruise
motor
Answer:c
a) Coarse pitch
b)Fine pitch
c) Negative pitch
Answer:a
a) bevel protractor
b)propeller protractor
c) clinometer
Answer:b
Answer:b
a) on speed
b)under speed
c) overspeed
Answer:c
c) remains constant
Answer:c
b)Tip
c) Trailing edge
Answer:a
b)from fine pitch through plane of rotation, course reverse then fine
reverse
Answer:a
c) Fuel temp
Answer:a
1. CTM will
Answer:a
Answer:c
a) reduce drag
Answer:b
a) Increases
b)Decreases
c) Remains unchanged
Answer:b
Answer:a
a) ATM
Answer:c
pass through
a) reverse
c) coarse
Answer:c
a) a negative pitch
Answer:b
Answer:b
Answer:c
Answer:c
Answer:a
Answer:a
Answer:c
a) tipping
b)topping
c) cropping
Answer:c
a) 95%
b)90%
c) 70%
Answer:c
Answer:c
a) the ratio of the useful work done by the propeller to work done
by the engine on the propeller
b)the ratio of the work applied to the geometric pitch to useful work
on the C.S.U.
Answer:a
c) in one revolution
Answer:a
b)increase
c) decrease.
Answer:b
b)rotation
c) feathering
Answer:b
a) angle of attack
c) blade angle
Answer:b
a) directly coupled
Answer:c
Answer:a
7. The constant speed unit (C.S.U.) governor works on the
principle of
Answer:c
b)forward speed.
c) SHP
Answer:b
Answer:a
b)torque meter.
Answer:c
This is exam number 11.
a) root
b)tip
c) master station
Answer:a
b)free turbine
Answer:b
3. Propeller blade angle
Answer:b
c) prevent windmilling
Answer: a
b)Engine torque
Answer:a
Answer: b
7. The gear segments on the blade roots of a hydromatic propeller
mesh with the
a) stationary cam
c) moving cam
Answer: c
Answer: b
Answer:b
b)blade tips to rotate slower than the root of the propeller blade
Answer:c
This is exam number 12.
1. Effective pitch is
ans b
answer : c
ans: c
Ans : a
a) Balancing
c) Drainage
Ans: c
Ans a
ans b