Professional Documents
Culture Documents
f18 Series Power Modules
f18 Series Power Modules
f18 Series Power Modules
Power Modules
F18 Series
• Industry Standard Package and Circuits
• Power Control Building Blocks
• 10 Circuits to Choose from
• UL Recognized E72445
Series
F18 92 SD 1200
Load Current Operating Voltage
400: 120 VAC 1200: 480 VAC
27: 25 Amps 92: 90 Amps
600: 240 VAC 1400: 530 VAC
42: 40 Amps 107: 105 Amps
57: 55 Amps 1000: 380 VAC 1600: 600 VAC
ELECTRICAL SPECIFICATIONS
Symbol 27 42 57 92 107(2)
Maximum DC Output Current (Tc = 85°C) ID 25 A 40 A 55 A 90 A 105 A
Maximum Voltage Drop @ Amps Peak VF 1.55V @ 75 A 1.4V @ 120 A 1.4V @ 165 A 1.40V @ 270 A 1.65V @ 300 A
Operating Junction Temperature Range TJ -40 -125˚ C -40 - 125°C -40 - 125°C -40 - 125°C -40 - 125°C
Critical Rate of Rise of On-State Current @ TJ=125°C [A/μs] di/dt 100 100 100 100 100
Critical Rate of Rise of Off-State Voltage [V/μs] dv/dt 1000 1000 1000 1000 1000
400 (120 VAC)
600 (240 VAC)
Repetitive Peak Reverse Voltage (AC Line Nominal) [Vpk] VRRM 800 (280 VAC)
1200 (480 VAC)
1400 (530 VAC)
1600 (600 VAC)
Maximum Non-Repetitive Surge Current (1/2 Cycle, 60 Hz) [A] ITSM 400 1000 1500 1950 2250
Maximum I²T for Fusing (t=8.3ms) [A²sec] I2T 670 4150 9350 15800 25000
Maximum Required Gate Current to Trigger @ 25°C [mA] IGT 150 150 150 150 150
Maximum Required Gate Voltage to Trigger @ 25°C [V] VGT 3.0 3.0 3.0 3.0 3.0
Average Gate Power [W] PG(AV) 0.5 0.5 0.5 0.5 0.5
Maximum Peak Reverse Gate Voltage [V] VGM 5.0 5.0 5.0 5.0 5.0
Maximum Thermal Resistance, Junction to Ceramic Base per Chip [°C/W] RJC 0.4 0.28 0.25 0.14 0.135
Isolation Voltage [Vrms] VISOL 2500 2500 2500 2500 2500
GENERAL SPECIFICATIONS
Description Parameters
Weight (typical) 4.75 oz (135g)
Torque Required Terminal Stud Screw : 30 in. lbs. Mounting Screws : 20 in. lbs.
GENERAL NOTES
(1) All parameters at 25°C and per section unless otherwise specified.
(2) Available only in SD and SDK circuit configuration.
CIRCUIT DIAGRAMS
DH AC + -
G2
K2 CCH 1 2 3
G2
K2
RD AC + -
G2 G2
K2 K2 AC + -
AC + - 1 2 3
2 3
CAH CCD
1
HD AC + - K1
G1
1 2 3 K1
G1
1 2 3
AC + -- 3-
K1
1 2
K1
G1
G1
CAD 1 2 3
G2
K2 1 2 3
SD SDK
K2
AC + - K1 AC + - G2
G1 K1
G1
G2 K2
K2 G2
AC + - AC + -
K1 K1 D + -
G1 G1
+ -
MECHANICAL SPECIFICATIONS
Tolerances: ±0.02 in / 0.5 mm
All dimensions are in: inches [millimeters]
.244
.550 .787 .787 .590 (6.2) DIA.
(14.0) (20.0) (20.0) (15.0)
.787 .500
[20.0] [12.7]
3.150 .393
(79.9) [10.0]
.110 X .036
M5 SCREW FASTON TERMINALS
3 PLCS
1.180 1.195
[29.9] [30.3]
3.620
(91.9) .12
(3.0)
Agency Approvals
E72445
Rev. 012518
ECN#20400
• The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie
the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren.
• Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen,
torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder
• Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein.
this product. • Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann
Failure to follow these instructions can result in
des lésions corporelles graves ou des Körperverletzung oder Materialschäden
serious injury, or equipment damage.
dommages matériels. zur Folge haben.
Semiconductor die
Solder
附件 - 环保信息
部件 有毒有害物质或元素
名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE)
半导体芯片
焊接点
50