Professional Documents
Culture Documents
Technology: Answers Drawing B
Technology: Answers Drawing B
Answers Drawing B
BS 499 part 2.
Course Reference WIS 10
Copyright © 2003 TWI Ltd M.S.Rogers
symbols
1
Drawings and Weld Symbol Interpretation
With the supplied drawing you are required to carry out the
TECHNOLOGY
following
1. Reference the drawing number onto your answer sheet
2. Specify the standard to which the weld symbols apply
3. Produce a neat sketch of how you see the welds,
numbering each weld individually.
4. Fully describe each weld symbol, example
Welded arrow side: Single-V butt
Welded other side: Sealing run.
5. On completion of the welding symbol interpretation, you
are then required to comment on the drawing with
reference to errors and incorrect set-ups
Copyright © 2003 TWI Ltd M.S.Rogers
TECHNOLOGY
2
BS 499 part2 Answers DRG B
1. Welded all way around: 6mm leg length fillet weld, site
TECHNOLOGY
weld (peripheral weld)
3
BS 499 part2 Answers DRG B
13. Welded arrow side: Backing run weld flat (flush) finish.
TECHNOLOGY
15. Welded arrow side: Single-U butt weld, flat (flush) finish
4
BS 499 part2 Answers DRG B
Any Questions
TECHNOLOGY