Professional Documents
Culture Documents
Today come with a Samsung HG48AC690 Smart LED TV with problem no power.
After checked the Power Supply (PSU), found that their standby circuit component
fails. Continues to check the PSU output voltages and found the standby voltage is
appear but no PS_ON feedback from the TV Mainboard.
For your information, nowadays, lots of the Samsung Smart types TV has this
issue. When their PSU standby circuit failure, it will affect or damage their MCU
firmware (corrupted) or MCU chip damage.
In this Samsung TV, their Mainboard MCU chip was damage and need to replace
it. Please refer to the above photo for more details of their location, replace the
MCU chip WT61P808. After that use the RT809H programmer to do the
Read/Write steps. Make sure that the RT809H programmer firmware upgraded to
the latest version. You can go to my website to subscribe and get the link
to download the software.
After the finished programming the MCU chip, power off Tv, remove all the
connection in between the programmer and TV Mainboard. Again, power on tv
Samsung Smart Tv, and it is back to normal now! Job done!
New 2019 LED/LCD TV T-CON & Panel Repair
Guide is Pre-Launch now!
Learn the Basic info for LCD & LED TV T-con Repair and TV Mainboard
repairing information. It will helps to you in LCD & LED TV Repair!
PV1-Plasma TV Repair Tips Ebook by Kent Liew:
PV1