Date / Time: Shift: Condition No Equipment Check item Not Remarks Ready N/A Ready
1 ROM pad Ore condition, communicate with spv and CRO
ROM pad operator with available Radio Loader operator with available Radio 2 ROM bin Dumping light (Red / Green) ROM bin level compare transmitter and actual 3 Appron feeder Track link condition, pan, all sefety guard, pull wire Sproket no rock and clear condition (head and tail) Motor condition (visusl check) ROM bin gate Chain condition at Local start / stop buttom remote position cros check to control room 4 Jaw Crusher No material inside Fly wheel guard installed and good condition All base body bolts complete and thight Local start / stop buttom remote position cros check to control room Chute under jaw, no pile up material inside, inspect the chute plate Jaw gape (communicate with spv or CRO) Jaw togle spring Grease level in storage tank 5 Emergency bin and feeder Bin not empty Belt condition in centre pisition, belt no broken, all roller good Loader unloading point is clear 6 Feed conveyor All safety guard installed All drum pulley (Head , bend, take up and tail ) in good condition Pull wire in healthy, healty Conveyors cover installed well Belt drfit switch condition, healthy Belt Rip condition healthy Ready status , all healthy (confirm to control room for SCADA) 7 Hoist crane Ready tu use Stand by at right position 8 Magnet Center position Pulling chain in safe posisition 9 Feed spout No built up material inside 10 Feed Spout 1 st, 2nd & V scrapper in good condition 11 Go around all walk way and make sure all walk way clear and safe Note: