Professional Documents
Culture Documents
1. Relative Density
2. Pendulum
3. Measurement
4. Moments
5. Hooke’s Law
6. Vectors
7. Flow Rate
8. Archimedes’ Principle
9. Momentum
10. Specific Heat Capacity
11. Electricity: Series Circuit
12. Electricity: Parallel Circuit
13. Radioactivity (Using Die)
14. Radioactive decay
15. Refractive Index (Glass Block)
16. Reflection on Plane Mirror
17. Magnetism
1
2
3
Results all groups (1-3) use data below
4
respectively should be close in value, even though the forces are different the distances
(D) can be altered to achieve this.
Sources of error
1. One mass is heavier than the other therefore the system tend to rotate a level
surface is important for load distribution.
2. The ruler would not balance because the moments were not balanced.
Precautions
1. Ensure the ruler is not moving or it will alter the value of the moment.
2. Masses should be clear from contact with table and parallax errors should be
avoided.
Conclusion
When compared the sum of the clockwise moments and the counter clockwise
moments were very close demonstrating that through manipulation of the apparatus to
validate the principle of moments.
Reflection
The experiment proved the principle of moments which states that the total clockwise
moments equals the total anticlockwise moments. All forces are referenced to their
distance from the pivot and adjusted until equilibrium is achieved.