Professional Documents
Culture Documents
html
Characteristics of TPU
Textile Coatings
TPUs are used in a wide range of textile Coatings with end-uses such as conveyor belts,
inflatable items, or military equipment.
GORE™ TPE Tubing for Peristaltic Pump Applications (Series AMP) is specifically designed for
use in high-purity applications that require extended life peristaltic pumping. This opaque tubing
is soft and flexible, thermally weldable, heat sealable and has a broad range of chemical
compatibility. GORE™ TPE Tubing for Peristaltic Pump Applications is a specialty thermoplastic
elastomer designed to meet the needs of biotech and pharmaceutical processes.
GORE™ TPE Tubing for Weldable Bioprocess Applications (Series GF) is constructed of a
proprietary thermoplastic elastomer material specifically formulated for use in high-purity
pharmaceutical and bioprocess applications. This clear tubing is thermally weldable, heat
sealable and has increased performance in higher temperature steam sterilization. Using
GORE™ TPE Tubing is ideal for high purity fluid transfer and peristaltic pumping.
http://www.azom.com/news.asp?newsID=22956
An injection molded elastomeric diaphragm that constantly rolls and unrolls over the
drive shaft of a mixer is a critical component in a patented single-use mixing system that
enables pharmaceutical manufacturers to prevent cross-contamination while eliminating
the need for cleaning and sterilizing traditional stainless steel equipment between
batches.
Bioprocess Accessories
Bioprocess Accessories
The GORE™ Single-Use Valve for steam-in-place applications provides positive flow control in
pharmaceutical and biotherapeutic fluid dispensing applications, where high purity is required. It
is ideally suited for barb-fitting or silicone-molded connection to disposable fluid transport
systems. When used as the primary connection interface between a vessel port and a closed,
pre-sterilized disposable assembly, it enables the assembly to remain aseptic throughout the
connection, SIP, and fluid transfer processes. The unique platinum-cured silicone valve body
liner creates a continuous, seamless, single-material contact surface for high value fluids. The
liner's one-piece molded construction extends from the device face as a sealing gasket for
sanitary end fittings and has a 0.25" (6 mm) ID tube extending from the valve body to enable
easy connection to disposable assemblies. With higher flow rates than alternative valves,
delivery time is minimized.
Habiblue extruded thermoplastic TPU round belts are an excellent solution for the conveyance
of light-weight
or thin, sliced food products. Habiblue can be used, for example, in the following industry
segments:
Bakery
The film is widely used on different products areas include the bags, packing, shoes.
The TPU film is environment friendly material also is food grade one.
Spray Polyurethane Systems for Roofs, Outdoor Stairways, Terraces and Parking Structures
Commercial metal or spray polyurethane foam (SPF) built-up roofs are subject to stresses caused by
rain, snow, fluctuating temperatures and changing mechanical loads. A tough, elastic, and weather-
resistant coating of the Baytec® SPR spray polyurethane system provides long-lasting protection for both
pitched and flat roofs. The elastomeric system stretches with the roof’s movement to effectively bridge
joints or cracks. At the same time, the system's high permeability to water vapor prevents moisture
from building up in the roof structure. The exceptional flexibility of Baytec® SPR spray polyurethane
systems at both high and low temperatures is a further advantage for stairways, parking structures and
terracing, which are exposed to fluctuating temperatures and thermal movement.