Professional Documents
Culture Documents
® ®
Tri-Sure metal closures, Tri-Sure plastic closures,
® TM ®
Tab-Seal caps, SambaCap , UNI-GRIP spouts,
® TM
ULTRA-BOND spouts, PLASTIPLUG plugs, Push-
After the G2 plug has been tightened to the correct torque, place the Tab-Seal cap over the drum closure.
Place the Tri-Sure closing tool over the Tab-Seal cap. Make sure the tool is not tilted, but square to the top of the drum.
This is essential for a nice crimp of the Tab-Seal cap onto the closure.
Gently apply downward pressure on the tool handles until the stop is reached. Now remove the tool.
Hold the tool with one hand, while operating the trigger valve with the other hand.
Fault finding
The Tab-Seal cap was not square to the closure during crimping, resulting in uneven crimp
Issued by: Product Management / www.tri-sure.com Issue no.: WEB-100015 Version: 1 Date: 26-05-2008 Page 1 of 1
Disclaimer: all information on our behalf in relation to our products, whether in nature of date, recommendations or otherwise, is supported by research and believed reliable, but we assume no liability whatsoever in respect of
application, processing or use made of the aforementioned information or products or any consequence thereof. The user undertakes all liability in respect of the application. Processing or use of the aforementioned
information or products, whose quality and other properties he shall verify, or any consequence thereof. No liability whatsoever shall attach to us for any infringement of the rights owned or controlled by a third party on
intellectual, industrial or other property by reason of the application, processing or use of the aforementioned information or products by the user.