Professional Documents
Culture Documents
Contact:
Subject: Ivan Oana Adriana
-
-
5/24/2021 7:15 PM
Task details
Plain surface
Operation type (CTPT) pre-machining
Workpiece surface condition code (WKPSCC) Pre-machined
Depth of machining feature (DEPTHMF) 0.5 mm
General width parameter (WIDTH) 39 mm
General length parameter (LENGTH) 29 mm
Cutting diameter (DC) 16 mm
Machine
Universal machining centre, stability of fixturing: Good stability
Recommended solution
2F342-1600-200-PD 1730
ECONOMY
Cutting time total (TCCT) 00:02.838 min:s
Cutting data
Legend
Premachining
Bending
Legend
Premachining
Produktinformation
Beskrivning
CoroMill® Plura solid carbide end mill for Heavy Duty milling
Beställningskod
EDP
Streckkod 7323224393042
DC cutting diameter 16 mm
RE Corner radius 2 mm
LU usable length 42 mm
SUBSTRATE Substrate HC
LF functional length 92 mm
Legal Notice
The data provided may be used at your own risk. AB Sandvik Coromant does not guarantee the applicability and functionality of the program, particularly the accuracy of the calculations. AB Sandvik Coromant will not accept any liability for trouble-free and
faultless use of the program. The user bears the entire risk of use.
In no event are Sandvik Coromant and its staff liable to the user for any damages, disadvantages and expenses, including any pecuniary damages, loss of data, etc., arising for the user or a third party out of, or in connection with, the use of, or inability to use,
the program. This exclusion of liability does not apply when and in as such as damages, disadvantages and expenses are caused intentionally or by gross negligence on the part of the staff of AB Sandvik Coromant.