Professional Documents
Culture Documents
Column definition
Column depth (larger column dim); h = 600 mm
Nominal cover to all reinforcement (longer dim); ch = 35 mm
Depth to tension steel; h' = h - ch – Ldia – Dcol/2 = 545 mm
Column width (smaller column dim); b = 300 mm
Nominal cover to all reinforcement (shorter dim); cb = 35 mm
Depth to tension steel; b' = b - cb - Ldia – Dcol/2 = 245 mm
Characteristic strength of reinforcement; fy = 500 N/mm2
Characteristic strength of concrete; fcu = 35 N/mm2
Minor axis (y)
35
300
BS8110:Table 3.19
Effective height – minor axis; ley = y lo = 2.250 m
Slenderness check; ley/b = 7.50
The braced column is short (minor axis)
Design moments
Design moment; Mdesign = max (abs(Mx) , Mxmin) = 10.0 kNm
Set up section dimensions for design:-
Section depth; D = h = 600 mm
Depth to "tension" steel; d = h' = 545 mm
Section width; B = b = 300 mm
Library item - Calcs – short col N+Mmaj
NOTE
Note:- the section dimensions used in the following calculation are:-
Section width (parallel to axis of bending); B = 300 mm
Section depth perpendicular to axis of bending); D = 600 mm
Depth to "tension" steel (symmetrical); d = 545 mm
Tension steel yields