Professional Documents
Culture Documents
Resin specification:
ASTM D4000-11 PAEK0000R30D73200
Shapes specification:
ASTM D6262-12 S-PAEK0140R30 1-888-CURBELL
TECAPEEK products are based on Victrex® PEEK polymer.
www.curbellplastics.com
Resin specification:
ASTM D4000-11 PAEK0000R30D73200
Shapes specification: Curbell Plastics is a proud supplier of Ensinger materials.
ASTM D6262-12 S-PAEK0140R30
This information reflec ts the c urrent state of our knowledge and is intended only to assist and advise. It is given without obligation or liability. It does not assure or
guarantee c hemic al resistanc e, quality of produc ts or their suitability in any legally binding way. Values are not minimum or maximum values, but guidelines that c an be
used for c omparative purposes in material selec tion. They are within the normal range of produc t properties and do not represent guaranteed property values. Testing
under individual applic ation c irc umstanc es is always rec ommended. Data is obtained from extruded shapes material unless otherwise noted. Referenc es to FDA
c omplianc e refer to the resins from whic h the produc ts were made unless otherwise noted. All trade and patent rights should be observed. All rights reserved. Data sheet
values are subjec t to periodic review, the most rec ent update c an be found at www.ensinger-inc .c om.