Professional Documents
Culture Documents
YAS5 Flyback converter 250 0.13 - Resister glass fabric base,epoxy resin Yes Yes *1
YAS10 Flyback converter 200 0.24 - Resister glass fabric base,epoxy resin Yes Yes *1
YAW5 Flyback converter 250 0.13 - Resister glass fabric base,epoxy resin Yes Yes *1
YAW10 Flyback converter 200 0.24 - Resister glass fabric base,epoxy resin Yes Yes *1
*1 Refer to Instruction Manual.
YA
2 Function YA-12
6 Cleaning YA-14
7 Soldering YA-14
YA
9 External Fuse YA-14
nIf the output voltage drops more than 70% of the rated output volt-
1 Pin Connection age in an overcurrent protection mode, the average output cur-
rent will also be reduced by the intermittent operation.
lSingle Output
FG -V
Fig.2.1 Overcurrent protection characteristics
AC OUT Load
Input ~ IN
AC +V nThe power supply which has a current foldback characteristics
may not start up when connected to nonlinear load such as lamp,
motor or constant current load. See the characteristics below.
lDual (±) Output
FG -V
Load
AC COM Load
Input ~ IN Load
AC +V
(b)
3 Wiring to Input/
Output Pin
nTo meet with conducted noise CISPR22-B, EN55022-B, connect
capacitor Ci which is more than 0.1µF at AC input terminal.
nTo decrease the ripple voltage further, install an external capacitor
Co at output terminal as shown below. Fig.4.1 Series operation
YES YES
NO NO
Fig.5.1 Pattern wiring
7 Soldering
nFlow soldering : 260 less than 15 seconds.
nSoldering iron (26W) : 450 less than 5 seconds.
80
put/output pins.
60 ACIN85 - 132V
40 ACIN133 - 264V
20
0
-10 0 10 20 30 40 50 60 70
Ambient temperature [ ]
AC100V
5V
12V
35
24
40
34
9 External Fuse
12V 28 42
15V 29 37 nFuse is not built-in on the input side. In order to secure the safety
of the unit, install a slow-blow type fuse on the input side.