Professional Documents
Culture Documents
n GENERAL
Safety engineering station (SENG) has a forcing function that locks a value of input/output variable and internal
variable (variables other than input/output variable) of application logic to a constant value regardless of the input
value from the actual input device or the operation result of the application, and forcibly changes the variables.
Forced I/O Viewer Package (*1) displays a list of information such as variables locked by the forcing function.
This software is available for ProSafe-RS and ProSafe-RS Lite (*2).
*1: RS4E5100 Safety System Engineering and Maintenance Function includes the forced I/O viewer package. The forced I/O
viewer package has been supported since ProSafe-RS R4.05.
*2: For ProSafe-RS Lite, it has been supported since ProSafe-RS R4.06.
n FUNCTION SPECIFICATIONS
Forced I/O Viewer shows a summary of the number of locks and whether there are locks, and lists information such as
locked variables for each of the following items:
• Input/output variables and internal variables
• SCS link transmission (send data, receive data)
• Inter-SCS safety communication (send data, receive data)
• Subsystem communication
• Safety subsystem communication
n SYSTEM REQUIREMENTS
Refer to the GS “ProSafe-RS Safety Instrumented System Overview (for Vnet/IP)” (GS 32P01B10-01EN) “ProSafe-
RS Safety Instrumented System Overview (for Vnet/IP-Upstream)” (GS 32P01B30-01EN), or “ProSafe-RS Lite Safety
Instrumented System Overview” (GS 32P51B10-01EN).
ORDERING INFORMATION
n
Specify the model and suffix code(s).
TRADEMARK ACKNOWLEDGEMENT
The names of corporations, organizations, products and logos herein are either registered trademarks or trademarks
of Yokogawa Electric Corporation and their respective holders.
All Rights Reserved. Copyright © 2019, Yokogawa Electric Corporation GS 32P02B20-01EN May 29, 2020-00
Subject to change without notice.