Professional Documents
Culture Documents
DESCRIPTION
NEC's PS9117 is an optically coupled high-speed,
active low type isolator containing a GaAlAs LED on PIN CONNECTION
the input side and a photodiode and a signal process- (Top View)
ing circuit on the output side on one chip.
5 4 3
1 2
+0.3
3.4 -0.1
5 4 3
7.0±0.3
4.4
1 2
0.15 +0.10
-0.05
2.6±0.2
1.27 0.5±0.3
0.1±0.1
0.4 +0.10
-0.05 0.25 M
MARKING EXAMPLE
9117
N234 Assembly Lot
No. 1 pin Mark
N *1
Initial of NEC
(Engraved mark)
N 2 34
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
*1 Bar : Pb-Free
PS9117
ORDERING INFORMATION
PART NUMBER ORDER NUMBER SOLDER PLATING PACKING STYLE SAFETY APPLICATION
SPECIFICATION STANDARDS PART NUMBER*1
APPROVAL
PS9117 PS9117-A Pb-Free*2 Magazine case 100 pcs UL approved PS9117
PS9117-F3 PS9117-F3-A Embossed Tape 2 500 pcs/reel
PS9117-F4 PS9117-F4-A
PS9117-V PS9117-V-A Magazine case 100 pcs DIN EN60747-5-2
PS9117-V-F3 PS9117-V-F3-A Embossed Tape 2 500 pcs/reel (VDE0884 Part2)
Approved (Option)
PS9117-V-F4 PS9117-V-F4-A
*1 For the application of the Safety Standard, following part number should be used.
*2 With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your
nearby sales office.
Detector High Level Output Current IOH VCC = VO = 5.5 V, VF = 0.8 V 1 100 μA
Fall Time tf 5
1 kV
VCM 90%
SW IF VCC = 5 V
0.1 µ F RL = 350 Ω 10%
0V
VO (monitor) tr tf
CL = 15 pF
VO VOH
(IF = 0 mA) 2V
VCM 0.8 V
VO VOL
(IF = 7.5 mA)
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity
when handling.
2. By-pass capacitor of 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between the leads of
the photocoupler and capacitor is no more than 10 mm.
PS9117
40
30
30
20
20
10
10
0 20 40 60 80 85 100 0 20 40 60 80 85 100
10
ICCL (IF = 10 mA)
Forward Current IF (mA)
10
TA = +85ºC 8
+50ºC
1 +25ºC 6
0ºC ICCH (IF = 0 mA)
-25ºC
4
0.1
2
0.01 0
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 -50 -25 0 25 50 75 100
4 RL = 350 Ω 0.4
1.0 kΩ
3 4.0 kΩ, 4.7 kΩ 0.3 IOL = 16.0 mA
13.0 mA
10.0 mA
2 6.0 mA
0.2
1 0.1
0
0 1 2 3 4 5 6 -50 -25 0 25 50 75 100
VO = 0.6 V
4 80
tPLH: RL = 4.7 kΩ
3 60
tPLH: RL = 1.0 kΩ
RL = 350 Ω tPLH: RL = 350 Ω
2 1.0 kΩ 40
4.0 kΩ
tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ
1 20
0 0
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
40 200
RL = 4.7 kΩ
0 0
-50 -25 0 25 50 75 100 -50 -25 0 25 50 75 100
100
tPLH: RL = 4.7 kΩ
80
60
tPLH: RL = 1.0 kΩ
40
0
3 5 7 9 11 13 15
1.75±0.1
2.0±0.05
7.4±0.1
4.0±0.1 1.5+0.1
-0
3.45 MAX.
12.0±0.2
5.5±0.1
1.55±0.1 3.9±0.1 3.0±0.1
8.0±0.1 0.3±0.05
Tape Direction
PS9117-F3 PS9117-F4
2.0±0.5
13.0±0.2
φ 13.0±0.2
φ 100±1.0
φ 330±2.0
R 1.0
21.0±0.8
13.5±1.0
17.5±1.0
11.9 to 15.4
Outer edge of
Packing: 2 500 pcs/reel flange
PS9117
NOTES ON HANDLING
(heating)
to 10 s
260ºC MAX.
220•C
to 60 s
180ºC
120ºC
120±30 s
(preheating)
Time (s)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100°C
PS9117
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
04/04/2005