Professional Documents
Culture Documents
LXT® LITHIUM-ION
18V LXT IMPACT DRIVER
BTD141 4NNJ2 Variable Speed, Reversible,
w/Light
18V LXT ANGLE IMPACT DRIVER 18V LXT 1/2" HAMMER DRIVER-DRILL 18V LXT 1/2" DRIVER-DRILL
BTL061 4NNJ3 Variable Speed, Reversible, BHP454 4NNH9 2-Speed, Variable Speed, BDF451 4NNH8 3-Speed, Variable Speed,
w/Light Reversible, w/Light Reversible, w/Light
Compact for Fastening in Tight Spaces Maximum Torque of 560 in.lbs. 2-Mode: Driver and Drill
• Motor produces 530 in.lbs.of max.torque and 0-3,000 IPM • 2-speed design (0 - 400 / 0 - 1,700 RPM) • Makita-built,4-pole max.torque motor delivers 560 in.lbs.of efficient
• Variable speed (0-2,000 RPM) for a range of applications • Shift-Lock™ drive system quickly shifts between modes torque in a compact size
• Large conveniently located paddle switch for comfortable operation • Compact and lightweight design for reduced operator fatigue • Shift-Lock™ drive system quickly shifts between modes
• Over one foot of tool extension for extra reach into deep,tight spaces • 2 Trigger-forward built-in L.E.D.lights illuminate the work area • 3-Speed design produces 25% faster working speed
• Built-in L.E.D.light illuminates the work area • Ergonomic shape fits like a glove with even pressure and easy control • Two built-in L.E.D.lights for more illuminated work
• Soft grip handle provides increased comfort on the job • Compact design at only 9-3/8" length and weighs only 4.6 lbs.
MODEL BHP454 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger
MODEL BTL061 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger (DC18RA),Side handle (450651-3),Depth gauge (322223-3),Bit holder MODEL BDF451 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger
(DC18RA),Contractor bag (821007-X) (419276-2),Screwdriver bits (784637-8),Tool case (824812-5) (DC18RA),Screwdriver bits (784637-8),Tool case (824812-5)
MODEL BTL06Z1:Tool Only - Battery,charger and contractor bag not included MODEL BHP454Z: Tool Only - Battery,charger and case not included. MODEL BDF451Z: Tool Only - Battery,charger and case not included.
1 makitatools.com
LXT® LITHIUM-ION
18V LXT 1/2” IMPACT WRENCH 18V LXT 1/2" IMPACT WRENCH 18V LXT 3/8" IMPACT WRENCH
BTW450 4NNJ6 High Torque, Reversible, BTW251 4NNJ5 Variable speed, Reversible, BTW253 4NNJ4 Variable Speed, Reversible,
w/Light w/Light w/Light
325 ft.lbs. of Torque for Maximum Fastening Power 170 ft. lbs. of Torque for Power Fastening 155 ft.lbs. of Torque for Power Fastening
• Makita-built motor delivers 325 ft.lbs.of max.torque in a compact size • Makita built,4-pole motor delivers 170 ft.lbs.of max.torque • Makita-built 4-pole motor produces 155 ft.lbs.of max.torque
• Motor provides 1,600 RPM and 2,200 IPM for added power for tough jobs • Compact design and weighs only 3.7 lbs.for reduced operator fatigue • Compact design and weighs only 3.4 lbs.for reduced operator fatigue
• Weighs only 7.5 lbs.for reduced operator fatigue • Ergonomic shape fits like a glove with even pressure and easy control • Ergonomic shape fits like a glove
• Rubber joint shock absorbent handle protects the battery housing • Built-in L.E.D.light illuminates the work area • Built-in L.E.D.light illuminates the work area
• Large rocker switch for easier tool usage • Electric brake for maximum productivity • Electric brake for maximum productivity
• Built-in L.E.D.light illuminates the work area • Soft grip handle provides increased comfort on the job
MODEL BTW251 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger
MODEL BTW450 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger (DC18RA), Contractor bag (821007-X) MODEL BTW253 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger
(DC18RA),Contractor bag (821007-X) MODEL BTW251Z: Tool Only - Battery,charger and case not included (DC18RA),Contractor bag (821007-X)
MODEL BTW450Z: Tool Only - Battery,charger and contractor bag not included MODEL BTW253Z: Tool Only - Battery,charger and contractor bag not included
18V LXT 3/8" ANGLE IMPACT WRENCH 18V LXT RECIPRO SAW 18V LXT 6-1/2" CIRCULAR SAW
BTL063 4NNJ7 Variable Speed, Reversible, BJR181 4NNK3 BSS610 4NNJ9 Blade-Left, w/Lights
w/Light
3/8" Angle Wrench for Working in Tight Spaces “Tool-less” Blade Change and Shoe Adjustment 6-1/2" Blade for Cutting 2x Material at 45°
• Motor produces 530 in.lbs.of max.torque and 0-3,000 IPM • Makita-built D35 high torque motor delivers 50% faster cutting • Makita-built D35 high torque motor delivers maximum power
• Variable speed (0-2,000 RPM) for a range of applications • Electric brake for maximum productivity • 50° maximum bevel cutting capacity
• Large conveniently located paddle switch for comfortable operation • Compact design;19-5/8" length and weighs only 8.1 lbs. • Two built-in L.E.D.lights illuminate the work area
• Over one foot of tool extension for extra reach into deep,tight spaces • Ergonomic shape fits like a glove • Ergonomic grip that fits like a glove with even pressure and easy control
• Built-in L.E.D.light illuminates the work area • Built-in L.E.D.light illuminates the work area • Heavy-gauge machined base for smooth and accurate cutting
• Soft grip handle provides increased comfort on the job • Retractable hook allows tool to remain close by but never in the way • Built-in dust blower keeps line of cut clean
MODEL BTL063 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger MODEL BJR181 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger MODEL BSS610 INCLUDES: 2 ea. Battery BL1830, Rapid optimum
(DC18RA),Contractor bag (821007-X) (DC18RA),1 ea.Blade (723054-A,723066-A), Tool case (824760-8) charger (DC18RA), 24T Blade (A-85092),Tool case (824757-7)
MODEL BTL063Z:Tool Only - Battery,charger and contractor bag not included MODEL BJR181Z: Tool Only - Battery,charger and case not included MODEL BSS610Z: Tool Only - Battery, charger and case not included
makitatools.com 2
LXT® LITHIUM-ION
18V LXT 5-3/8" METAL CUTTING SAW 18V LXT JIG SAW 18V LXT CUT-OFF/ANGLE GRINDER
BCS550 4NNK7 Blade-Right , w/Light BJV180 4NNK1 Orbital, Variable Speed, BGA452 4NNK5 Torque Control
w/Light
Blade-Right Design for Easy Over-head Cutting Custom Cutting Without a Cord Compact Barrel Grip for Easy Handling
• Cuts Unistrut®,all thread,channel,corrugated,conduit,pipe, • 3 orbital settings plus straight cutting for use in a variety of materials • 10,000 RPM Makita built motor produces 50% faster grinding
sheet metal,square tubing,steel and more • Makita built motor delivers 2,600 SPM for fast and efficient cutting • More compact design;12-1/2" long and weighs only 5.6 lbs.
• Makita built high torque motor produces 3,400 RPM for faster • “Tool-less”blade change system for more productivity • Motor protection circuit with over-torque prompt lights
metal cutting • Low vibration and noise level for more control and comfort • Ergonomic shape fits like a glove with even pressure and easy control
• Compact design;12" length and weighs only 6.4 lbs. • Built-in L.E.D.light illuminates the work area
• Built-in L.E.D.light and ergonomic grip that fits like a glove MODEL BGA452 INCLUDES: 2 ea. Battery BL1830, Optimum charger,
MODEL BJV180 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger Cut-off wheel guard (135103-2), Grinding wheel guard (125273-5),
MODEL BCS550 INCLUDES: 2 ea. Battery BL1830, Rapid optimum charger (DC18RA),Jig saw blade set (B-10,B-13,B-22),Anti-splintering device Grinding wheel (741424-8-1), Cut-off wheel,Tool case (824767-4)
(DC18RA),30T Carbide-tipped blade (A-94518),Tool case (824802-8) (192557-6),Tool bag (821007-X) MODEL BGA452Z: Tool Only - Battery, charger and case not included
MODEL BCS550Z: Tool Only - Battery, charger and case not included MODEL BJV180Z: Tool Only - Battery,charger and case not included
18V LXT PORTABLE BAND SAW 18V LXT 7/8" ROTARY HAMMER 18V LXT 3/8" ANGLE DRILL
BPB180 4NNK4 Variable Speed, w/Light BHR240 4NNK2 SDS-Plus, Variable Speed, BDA350 4NNJ8 Variable Speed, Reversible,
Reversible w/Light
Light-weight with Large 4-3/4" x 4-3/4" Throat 3-Mode: Hammer Drill / Chisel / Drill Maximum Torque of 121 in.lbs.
• Makita built motor delivers 50% faster cutting with 6-setting variable • 3-Mode switch for rotation only,hammering with rotation,or hammering only • Variable speed (0 - 1,800 RPM)
speed dial at 275-530 ft./min. • 2X faster drilling with synchronized RPM and BPM for more efficient drilling • Compact design at only 12-3/8" long and weighs only 3.5 lbs.
• Adjustable foot protects material and provides positive support • Built-in torque limiter clutch disengages if bit jams when hitting rebar • 3/8" keyed metal chuck for improved bit gripping power and a lower
• More compact design at only 20-5/8" long and weighs only 14.1 lbs. • Chisel rotates 360° with 40 different positions profile for use in close quarters applications
• Built-in protective rubber bumpers • More compact design at only 16-1/8" long and weighs only 7.1 lbs.for less • Built-in L.E.D.light illuminates the work area
• Two built-in L.E.D.lights and removable hook operator fatigue
MODEL BDA350 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger
MODEL BPB180 INCLUDES: 2 ea. Battery BL1830, Rapid optimum MODEL BHR240 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger (DC18RA),Chuck key holder (450688-0),Chuck key (763415-9),
charger (DC18RA), 18TPI blade (792559-A),Tool bag (831284-7) (DC18RA),Tool bag (821007-X) Contractor bag (821007-X)
MODEL BPB180Z: Tool Only - Battery, charger and case not included MODEL BHR240Z: Tool Only - Battery,charger and case not included MODEL BDA350Z: Tool Only - Battery,charger and bag not included.
3 makitatools.com
LXT® LITHIUM-ION
18V LXT 3/8" CROWN STAPLER 18V LXT 18 GAUGE STRAIGHT SHEAR 18V LXT 4-PC. COMBO KIT
BST221 4NNH7 BJS130 4NNK6 LXT407 4NNL7 Electrician / HVAC /
Fabricator / Metal Builder
Powerful Stapler Drives 3/8" Crown Staples Makita-Built 4-Pole Motor Delivers 2,800 SPM
• Drives 1/4",3/8",1/2",9/16",5/8",3/4" and 7/8" length staples • Tough double-cut shear design handles up to 18 gauge mild steel and
(3/8" crown);also utilizes Arrow® T50 type staples 20 gauge stainless steel for straight or scribe cuts without deforming the
• Spring-loaded driving mechanism allows for a more compact tool with material
less weight • Swivel shear head rotates 360º for increased cutting options
• Rugged machined aluminum magazine ensures smooth loading and • Compact design at only 13-3/4" long and weighs only 5.0 lbs.
feeding of staples • Reversible belt-clip attaches to either side of the tool
MODEL BST221 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger MODEL BJS130 INCLUDES: 2 ea.Battery BL1830,Rapid optimum charger
(DC18RA),Safety glasses (192517-8),Contractor Bag (821007-X) (DC18RA),Adjustment wrench (783202-0),Contractor bag (821007-X)
MODEL BST221Z: Tool Only - Battery,charger and case not included MODEL BJS130Z: Tool Only - Battery,charger and bag not included
18V LXT 2-PC. COMBO KIT 18V LXT 2-PC. COMBO KIT 18V COMPACT IMPACT DRIVER
LXT218 4NNL8 All Tradesmen LXT211 4NNL6 All Tradesmen BTD142HW 4NNJ1 Variable Speed, Reversible,
w/Light
makitatools.com 4
CORDLESS
18V COMPACT 1/2" DRIVER-DRILL 18V COMPACT LI-ION 2-PC. COMBO KIT 10.8V ULTRA COMPACT 2-PC.COMBO KIT
BDF452HW 4NNH6 2-Speed, Variable Speed, LCT200W 4NNL4 Installers / Finishers LCT203W 4NNL5 Installers / Finishers
Reversible, w/Light
10.8V ULTRA COMPACT IMPACT DRIVER 10.8V ULTRA COMPACT 3/8" DRIVER-DRILL 10.8V ULTRA COMPACT DRIVER-DRILL
TD090DW 4NNL1 Variable Speed, w/Light DF330DW 4NNK8 2-Speed, Variable Speed, DF030DW 4NNK9 Variable Speed, w/Light
w/Light
800 in.lbs. of Max.Torque Ultra Compact Design at Only 2.2 lbs. 2-Speed Delivers Max.Torque in Ultra Compact Size
• Variable speed (0-2,400 RPM) for a wide range of fastening applications • Makita-built motor delivers 200 in.lbs.of max.torque • Variable speed design covers a wide range of drilling and fastening
• Ultra compact design and weight for reduced operator fatigue • 2-speed design (0-350/0-1,300 RPM) covers a wide range of drilling and applications
• Built-in L.E.D.light illuminates the work area driving applications • Ultra compact design and weight for reduced operator fatigue
• Ergonomic shape fits like a glove with even pressure and easy control • Ultra compact design;7-7/16" long and weighs only 2.2 lbs.for reduced • Built-in L.E.D.light illuminates the work area
• Soft grip handle provides increased comfort on the job operator fatigue • Ergonomic shape fits like a glove with even pressure and easy control
• Built-in L.E.D light illuminates the work area • Soft grip handle provides increased comfort on the job
MODEL TD090DW INCLUDES: 2 ea.Battery BL1013,Battery charger
(DC10WA),Tool holster (168467-9),#2 Double ended Philips bit MODEL DF330DW INCLUDES: 2 ea.Battery BL1013,Charger (DC10WA), MODEL DF030DW INCLUDES: 2 ea.Battery BL1013,Battery charger
(784244-7),Tool case (824842-6) Tool holster (168467-9),#2 Double ended Philips bit (784244-7),Tool case (DC10WA),Tool holster (168467-9),#2 Double ended Philips bit
(824842-6) (784244-7),Tool case (824842-6)
5 makitatools.com
CORDLESS/CONCRETE
7.2V LI-ION IMPACT DRIVER 7.2V LI-ION DRIVER-DRILL 2'' ROTARY HAMMER
TD020DSEW 4NNL3 Reversible, w/Light DF010DSE 4NNL2 2-Speed, Reversible, w/Light HR5210C 2KUX6 SDS-Max, Variable Speed
Maximum Torque of 177 in.lbs. Precision Torque Control with Auto-Stop Clutch Powerful 15 AMP Motor
• Makita-built motor and impact mechanism delivers 177 in.lbs. • Auto-stop clutch automatically shuts off the tool when the clutch • 1,075-2,150 BPM to handle the most demanding jobs
of max.torque disengages to prevent overdriving the fastener • “No hammering when idling”helps increase tool life
• Switch between pistol grip and in-line for work in tight spaces • 2-speed design (200 RPM/650 RPM) covers high or low torque applications • One-touch sliding chuck allows for quick bit changes
• Ultra compact design;weighs only 1.2 lbs. • 21 clutch settings and drill mode provides added fastening control • Soft grip for more comfort
• Built-in L.E.D.light illuminates the work area • Makita-built motor delivers 44 in.lbs.of max.torque • Recessed operation mode switch helps prevent it from being damaged
• Ergonomic shape fits like a glove • Switch between pistol grip and in-line for work in tight spaces • Built-in torque limiter ensures stable torque control
• Compact design;weighs only 1.2 lbs.for reduced operator fatigue
MODEL TD020DSEW INCLUDES: 2 ea. Battery BL7010, Charger (DC07SA), MODEL HR5210C INCLUDES: Side handle (158057-6), D-handle
Bit set (194375-8),Tool bag (831272-4) MODEL DF010DSE INCLUDES: 2 ea.Battery BL7010,Charger (DC10WA), (471003-1), Depth gauge (321248-4), Plastic tool case
Tool case (824842-6) (158275-6), Bit grease (181573-3)
Anti-Vibration Technology for 2X Less Vibration Built-in Torque Limiting Clutch Light Up Your Drilling Surface with L.E.D. Power
• Powerful 11 AMP motor;efficient 1,350-2,750 BPM • 10 AMP motor delivers more power for the most demanding applications • 3-mode operation: “rotation only”,“hammering with rotation”and
• 2-mode operation for “hammering only”or “hammering with rotation” • One-touch sliding chuck for quick bit changes “hammering only”
• L.E.D.power light indicates switch failure or cord breakage • 2-mode operation for “hammering only”or “hammering with rotation” • Extended service life of carbon brushes
• L.E.D.service light indicates carbon brushes need to be replaced • Soft grip for more comfort • Recessed lock-on button for continuous use
• Preset variable speed dial with 5 settings • “No hammering when idling”helps increase tool life • “No hammering when idling”helps increase tool life
• Counterbalance system reduces vibration to only 4.5 m/s2 • 0-1,100 RPM and 0-4,500 BPM for demanding applications
MODEL HR4002 INCLUDES: Side handle (158131-0), D-handle (419868-7)
MODEL HR4010C INCLUDES: Side handle (416299-1),D-handle Depth gauge (321248-4), Plastic tool case (158275-6), MODEL HR2811F INCLUDES: Side handle (154842-5), Depth gauge
(417003-1),Depth guage (321248-4),Bit grease (181573-3),Tool case Bit grease (181573-3) (324219-0), Plastic tool case (824789-4)
makitatools.com 6
CONCRETE/DRILLS/FASTENING
5/8" HAMMER DRILL 16" POWER CUTTER 14" POWER CUTTER
HP1641K 3NLP8 DPC8112 2KUX4 DPC7321X1 2KUX3
Includes 14"
Diamond Blade
Lightweight (4.0 lbs.) with Large Capacity Drilling Powerful 81 cc. Engine with 5 Stage Filter System Powerful Engine with Advanced Directional Airflow
• Large capacity drilling up to 5/8" in concrete • Reinforced aluminum blade guard with 70° range of limitless positioning • Microchip controlled carburetor designed to compensate engine
• Powerful 6.0 AMP motor • Improved ignition system with larger flywheel and rare earth magnets timing according to work load
• Dual-mode operation:“Rotation Only”or “Hammering with Rotation” • Cutting arm position simply changes from center position to flush • Large volume exhaust ported to direct debris away from operator
• Ergonomic handle with rubberized soft grip for increased comfort and (outboard) position allowing cuts directly adjacent to curb edges or walls • Aluminum guard and wheel pressure plates to reduce weight
control • On-Off-Choke operating switch on a single lever for operator convenience • Limitless positioning of guard within 70° range of rotation
• Extended service life of carbon brushes • Improved exhaust emissions are EPA Phase II compliant
• 0 - 2,800 RPM;0 - 44,800 IPM for the most demanding applications MODELS DPC7321 INCLUDE: 14'' Abrasive wheel (965-210-222),
MODEL DPC8112 INCLUDES: Plastic bag,Water kit (394-365-630),Universal wrench (941-719-140),
MODEL HP1641FK INCLUDES: Drill chuck,Side handle,Depth gauge, 16" cut-off wheel (966-161-020),Universal wrench (941-719-140), Torx wrench (940-827-000),Screwdriver (944-340-001),
Tool case Torx key (940-827-000),Screwdriver (944-340-001) Adaptor (394-228-121)
SPECIFICATIONS: SPECIFICATIONS:
Capacities: Engine: Displacement DPC811 25.0 cu. in. (81 cc.) Wheel: Max. spindle speed DPC8112 3,765 RPM
Concrete (5/8"), Wood (1-3/16"), Steel (1/2") DPC7321 4.5 cu.in. (73 cc.) DPC7321 4,300 RPM
Carburetor Tillotson Wheel diameter DPC8112 16"
No load speed 0 - 2,800 RPM Maximum power DPC8112 6.1 HP/4.5 kW DPC7321 14"
Impacts per minute 0 - 44,800 IPM DPC7321 5.6 HP/4.2 kW
Arbor 20mm
No load speed 9,350 RPM
AMPS (110V) 6.0 Max cutting depth DPC8112 5-3/4"
Ignition system Electronic DPC7321 4-13/16"
Net weight 4.0 lbs. Starter system Recoil starter Dry weight DPC8112 23.9 lbs.
Shipping weight 7.0 lbs. Clutch Auto. centrifugal type DPC7321 22.0 lbs.
Fuel mix 50:1 Shipping weight DPC8112 32.0 lbs.
Fuel tank capacity 37 oz. DPC7321 28.0 lbs.
Light Up Your Drilling Surface with L.E.D. Power Large Hammer for Greater Impact Power Powerful 12 AMP Motor
• Powerful 4 AMP motor for industrial applications • Maximum torque of 738 ft.lbs. • Efficiently tightens 5/8",3/4" and 7/8" TC bolts
• Compact design (10-5/8'' long and 2-5/8'' head width) for use when • Efficient impact system with less vibration • Compact and light weight at only 10.6 lbs.
working between framing studs and other close quarter applications • Externally accessible brushes for great serviceability and ball bearings • Rubber bumper helps protect the tool
• Variable speed (0-2,400 RPM) for controlled drilling for longer tool life • Anti-slipping mechanism:tool won't start until inner sleeve engages
• Paddle switch with speed limiting dial to prevent over tightening of • Side handle rotates 360º for operator convenience with bolt tip
fasteners and for easy one-handed operation • Impact resistant aluminum gear housing with rubber boot for • Makes installation process easier for greater efficiency
protection and increased durability
MODEL DA3010F INCLUDES: Drill chuck (763174-5),Chuck key (763415-9), • Rocker type switch for one-handed forward or reverse operation MODEL 6922NB INCLUDES: Outer sleeve,20mm (764361-9),Inner sleeve,
Key holder (411780-7),Side handle (152490-4) 20mm (764251-2),Outer sleeve,22mm (153909-6),Inner sleeve,22mm
MODEL TW1000 INCLUDES: Side handle (123018-5),Tool case (824737-3) (764348-1),Screwdriver (783001-0),Steel tool case (823276-0)
7 makitatools.com
METALWORKING
4-1/2” ANGLE GRINDER 4-1/2" ANGLE GRINDER 4-1/2" ANGLE GRINDER
GA4530 4AYY1 9557PB 4AYX9 AC/DC 9564CV 1GUA4 Variable Speed
Powerful 6 AMP Motor for the Toughest Applications Extra Large Paddle Switch for Easy Operation SJS - Super Joint System Helps Prevent Gear Damage
• Ergonomic barrel grip for increased handling • Powerful 7.5 AMP motor for heavy professional grinding applications • Electronic limiter prevents motor burnout
• Labyrinth construction seals and protects the motor from dust and debris • Small circumference barrel grip for easy handling • Electronic speed control maintains desired speed under load
• Metal gear housing for increased durability • Labyrinth construction seals motor and bearings from contamination • Soft start feature for smooth startups
• Rotatable gear housing can be positioned every 90º • Rotatable gear housing can be positioned every 90° • Variable speed (2,800-10,500 RPM) to match speed to desired
• Refined design at only 3.1 lbs. • Lock-on/off feature for continuous operation application;lock-on feature
• AC/DC Switch for use with alternative power sources • Labyrinth construction seals motor and bearings from contamination
MODEL GA4530 INCLUDES: 4-1/2" grinding wheel,Lock-nut wrench,
Lock-nut,Inner flange, Wheel guard,Side handle MODEL 9557PB INCLUDES: 4-1/2" Grinding wheel (741424-8-1), MODEL 9564CV INCLUDES: 4-1/2'' Grinding wheel (741424-8-1),
Lock nut wrench (782422-3),Lock nut (193465-4),Inner flange Lock nut wrench (782412-6),Side handle (152490-4),Lock nut
(224399-1),Wheel guard (125273-5),Side handle (153489-2) (193465-4),Inner flange (224378-9),Wheel guard (135107-4)
SJS - Super Joint System Helps Prevent Gear Damage Super Joint System Helps Prevent Gear Damage Powerful Motor with Fast 25,000 RPM
• Electronic limiter prevents motor burnout • Improved 12 AMP motor for increased output power in a compact tool • Easy to handle at only 3.5 lbs.
• Electronic speed control maintains desired speed under load • 5-stage variable speed (4,000-9,000 RPM) matches the RPM • Anti-dust motor section
• Soft start feature for smooth start-ups to application;lock-on feature • Solid aluminum housing with stepped neck for added durability
• Variable speed (2,800-10,500 RPM) to match speed to • “Tool-less”wheel guard adjustment for easy clamping • Vent slots designed to direct exhaust air away from the user
desired application;lock-on feature • Labyrinth construction seals and protects the motor and bearings • Round-shaped collet nut reduces the possibility of damage
• Labyrinth construction seals motor and bearings from contamination from dust and debris by creating a complex set of channels
MODEL GD0601 INCLUDES: 2 ea.Wrench #13 (781039-9),
MODEL 9565CV INCLUDES: 5'' Grinding wheel (741407-B),Lock nut MODEL 9566CV INCLUDES: 1 ea.Cut-off wheel (724117-A-25),Lock Collet cone 1/4" (763625-8)
wrench (782412-6),Side handle (152490-4),Lock nut (193465- nut wrench (782412-6),Lock nut (224574-9),Side handle (152490-4),
4), Inner flange (224378-9),Wheel guard (135108-2) Inner flange (224390-9),Cut-off Wheel guard (165342-0)
makitatools.com 8
METALWORKING
1/4'' DIE GRINDER 5" DISC SANDER 7'' DISC SANDER
GD0800C 1GUC2 Variable Speed GV5010 6RA90 GV7000C 6RA91 Variable Speed
High Power - 6.6 AMP Motor Powerful 4.2 AMP Motor Delivers 4,500 RPM Lightweight (4.4 lbs.) for Comfort and Control
• Super Joint System (SJS) helps prevent gear damage • Continuous rating input of 440W • Advanced electronics include soft start and electronic speed control
• Electronic speed control maintains constant speed under load • Comfortable rubberized grip for improved operator comfort and control • Variable speed (2,500-4,700 RPM)
• Slender double-neck aluminum gear housing for easy handling • Ball-and-needle bearing construction for long tool life • Trigger lock-on button for operator convenience
• Labyrinth construction seals motor and bearings from contamination • Double insulated • Motor over pad design for better balance and control
• Variable speed control dial to match the speed to desired application • Unique and well-defined exterior • Externally accessible carbon brushes for efficient maintenance
MODEL GD0800C INCLUDES: 1/4'' Collet (192986-3), MODEL GV5010 INCLUDES: 1 ea.Sanding disc (742109-9),Plastic pad MODEL GV7000C INCLUDES: 1 ea.Sanding disc #80 (742071-8),
Wrench #13 (781203-2),Wrench #19 (781206-6), (743025-8),Side handle (752491-2),Hex wrench (783203-8) Rubber pad (192978-2),Lock nut (224517-1),
Side handle (192985-5) Spanner wrench #17 (781008-0),Lock nut wrench (782412-6),
Side handle (152491-2)
Handles 16 Ga. Mild Steel and 18 Ga. Stainless Powerful Operation in Mild Steel up to 10 Ga. For Cutting in Pipe, Angle Iron, Conduit and More
• For clean and precise work in keystone plate,deck plate and • Built-in thickness gauge for convenience • Carbide tipped blade lasts 50X longer than abrasive wheels;
other sheet materials • All ball and needle bearings for longer life cuts clean,accurate and virtually burr free
• Slim and ergonomic body design for easy gripping • Easy punch and die replacement for reduced down time • Quick release vise for secure stock retention and fast repeated cut-offs
• Die rotates 360º;large 1/4'' stroke • Double insulated • Lock-off button helps prevent accidental starting
• Extremely light (weighs only 3.5 lbs.) for easy handling • Quick release support fence adjusts 0-45º for miter cutting
• Lock-on sliding switch for continuous use MODEL JN3200 INCLUDES: Punch (792728-1),Die (792292-2), • Shaft lock for easy wheel changes
• Built-in thickness gauge for convenience Hex wrench (783201-2),Wrench (781019-5),
• Easy punch and die replacement for reduced down time Steel tool case (181797-1) MODEL LC1230 INCLUDES: Carbide tipped blade (A-90532),
Socket wrench (782210-8),Switch button (411478-6),
MODEL JN1601 INCLUDES: Wrench (781028-4),Hex wrench (783208-8) Safety goggles (191686-2)
9 makitatools.com
SAWS/SANDERS
7-1/4" CIRCULAR SAW 16-5/16" CIRCULAR SAW RECIPRO SAW
5007NK 3NLP7 5402NA 6RA89 Electric Brake JR3070CT 1GML3 Orbital, Variable Speed
#1 Contractor Saw Preferred by Professionals Large Cutting Capacity for Beams and Timber 2X Less Vibration with Counter Balance System
• Powerful 15 AMP motor for a high power-to-weight ratio • Cuts 6x material at 90º and 4x material at 45º in a single pass • Unique clutch assembly helps protect the gears should the blade bind
• Lower guard design improves performance when making bevel • Weighs only 28.7 lbs.for ease of operation • 4-position orbital/straight cutting action
and narrow cuts • Electric brake for maximum productivity • Variable speed dial for presetting maximum speed
• Large cutting capacity (2-1/2" at 90º,1-3/4" at 45º and 1-3/8" at 56º) • Powerful 15 AMP motor delivers enough power to cut through • Powerful 15 AMP motor with electronic speed control maintains
• Ball bearing construction engineered for a longer tool life pressure treated lumber constant speed under load
• Bevel cuts 0º - 56º with positive stops at 22.5º,45º and 56º • Long 1-1/4" stroke for faster cutting
• Well-balanced design for superior handling and performance MODEL 5402NA INCLUDES: Carbide tipped blade (A-90956), • “Tool-less”blade change and shoe adjustment
Blade wrench (783204-6),Rip fence (164019-4),Saw storage holder
MODEL 5007NK INCLUDES: Carbide tipped blade (D-24826), (194701-1) MODEL JR3070CT INCLUDES:1 ea.Blade (723054-A,723066-A),
Blade wrench (783204-6),Rip fence (164095-8),Plastic tool case (824772-1) Metal tool case (154609-1)
12" DUAL SLIDE COMPOUND MITER SAW 1-1/8" x 21" BELT SANDER 4" x 24" BELT SANDER
LS1216L 4AYY2 9031 1GUB9 Variable Speed 9403 3NLP4
8" Crown Molding Cutting Capacity Variable Belt Speed (656-3,280 ft./min.) Powerful 11 AMP Motor for High Production Use
• Large cutting capacity for up to 8" crown molding (vertically nested), • Compact and lightweight (4.6 lbs.) for close quarter work • Quietest belt sander in its class (only 84dB)
6-1/2" baseboard (vertical),and 15" at 90º • Ball bearing construction for smooth operation and long tool life • 4'' wide belt with a speed of 1,640 ft./min.for fast material removal
• Compact design with a patented 4-steel rail sliding system • Narrow belt and exposed front pulley for use on irregular shapes • Labyrinth construction seals motor and bearings from contamination
• Exclusive 6 linear ball bearings deliver “dead-on”accurate cuts • Multi-position side handle for easy and comfortable operation • Large front grip is positioned for operator comfort
• Exclusive 5-1/2" tall dual sliding fence system features versatile upper • Lock-on button for continuous operation • Cord is located on the upper portion of the handle for operator
and lower fence adjustments for more precise miter and bevel cuts • Connects to dust collector for a cleaner work environment convenience
• Dust bag swivels 360º for more convenient operation
MODEL LS1216L INCLUDES: Carbide tipped blade,Vertical vise (122854-6), MODEL 9031 INCLUDES: 2 ea.Abrasive belt (#40;742301-7,
Socket wrench #13 (782232-8),Hex wrench (783208-8),Dust bag #60;742302-5,#80;742303-3,#100;742304-1,#120;742305-9) MODEL 9403 INCLUDES: 1 ea.Abrasive belt (#80;742322-9),
(122852-0),Triangular rule (762001-3) Dust bag (122562-9)
makitatools.com 10
CORDLESS TOOLS
GC-0509-2.5M MA-0379-09
8SS3020
12