otra sfeemn fates
OIL INDIA LIMITED
wr arr
DRILLING DEPARTMENT
fT / DULIATAN
te Use On
Ref. No. DR! -07,003012021 ‘teat 18-02-2021
|From |: | Chief General Manager- Drilling Services and HoD(UC)
1 5 he Z
To : | Resident cher ExCatve oy pe WP ors
an ~ | In-house Team for Monitoring Certification Process of Third Party
jubject . 4 .
Inspection of Casing
Reference |: | Discussion in presence of CMD & D(O) on 07/01/2021
Sir,
The casing forms & major structural component of the wellbore and serves several important functions like
preventing the formation wall from caving into the wellbore, isolating the different formations to prevent
the Tlow or crossfiow of formation fluid etc.
20
30
It is well known to you that inventory management for casing, which includes procurement also,
catered by OIL’s own expertise. However, as per practice, Third Party Inspection (TPI) of
‘Tubulars (especially casing of all Sizes) is nominated by the supplier on whom the order is placed
andall cost of TPI is borne by the Supplier. At present OIL is carrying out TPI of casing procured
under various tender by below mentioned TPIA which are engaged by the Bidder after getting due
approval from Oil India Limited. For Casing the approved agencies are as below,
@ Mis. Lloyds,
Gi) Mls Bureau Veritas,
(ii) Mis, RITES,
@®) Ms.LRS.,
(v) Mls. Tuboscope Veteo and
(vi) Mis DNV-GL
However, ithas been observed that there are numbers of failure of 514" casing in hermetical testing
during the financial year 2018-19 and 2019-20, which not only resulted in huge financial loss but
also reduced the company’s performance. In this connection, few wells like MFY, TAR, DIT,
HZG, DIK, DIG may be referred which were completed in the recent years where failure occurs
during 5% "casing hermetical testing.
om
RCE'S OFFICE
yofie FEB 2021
SILINDIA LTD. OULIRIAN
Page 1 of 240
5.0
60
70
itr sfemn farres
OIL INDIA LIMITED
arr fuer
DRILLING DEPARTMENT
gfQSISE/ DULIAJAN
(eet ofig fee SHE Ee /For Internal Use Only)
‘Since the failure of casing occurred even after the TPI carried out by extemal agency engaged by
the bidder (approved by OIL} we propose to engage TPI from our end for better monitoring and
supervision. This matter was highlighted in the recent meeting held between CMD, D (O) and
Drilling department on 07.01.2020. During the discussion it was proposed to appoint the TPI by
OIL at its own cost and there by having some control on the TPT inspection of casing,
Quote
CGM-DS brought out the issue of TPI against casing procurement. During the discussion the
possibility of appointing the TPI from OIL’s side is to be explored and if possible to complete the
same within 15 days.
Unquote
In view of above, a team has been constituted with following members and the team will report
ty COM-DS ain HuD (/C)
1. Shri Rajib Barua, DGM-D (Planning) Convener
2. Shri Abhijit Gogoi, DyCED(TS)
3. Shri Ankit Parasor,
D (Rig Building)
4. Shri Manash Pratim Hazarika, DyCED (Operation)
‘Team has been entrusted the following responsibilities:
(® To frame the code of practice for the inspection as guideline as per standards and
guidelines.
ii) To develop an action plan for developing the core competency on NDT through full time
certification in Level 2.& Level 3 and any other training, as deemed fit under Third Party
Inspection including “on the job training.
Gi) To monitor TPI inspection at factory or at site, as applicable.
‘The above is for your information and we request your kind “In Principle Approval” please.
Copy: File
Page 2 of 2