Professional Documents
Culture Documents
Load Check BIZHUB 501
Load Check BIZHUB 501
2008
A. Procedure
B. List of loads
0 0 L1 Exposure lamp
1 0 M4, Toner supply motor, toner solenoid Same as 55-003
SD5 turn ON at the same time
23 3 M124 Paper lift motor /3 (PC-206) The upper limit sensor /3 (PS114)
turns ON, or it is stopped by the stop
button.
4 M125 Paper lift motor /4 (PC-206) The upper limit sensor /4 (PS123)
turns ON, or it is stopped by the stop
button.
5 M151 Paper lift motor (LU) The upper limit sensor (PS152) turns
ON, or it is stopped by the stop but-
ton.
6 M9, Feed motor, pick-up solenoid /BP turn Valid only when the paper empty sen-
SD1 ON at the same time sor/BP (PS18) detects a no paper
condition.
25 1 CL1 Registration clutch
2 CL2 Loop clutch
3 CL3 Vertical conveyance clutch
4 CL151 Feed clutch (LU)
29 0 SD2 Drum claw solenoid ON
31 1 M2, L1 Scanner motor, exposure lamp After home position search, A3
makes a single scan operation.
2 Scanner motor, exposure lamp After home position search, A3
makes a continuous scan operation.
8 M2 Scanner motor The exposure unit is moved to DF
read position.
9 Scanner motor The exposure unit is moved to stand-
by position.
32 1 M5 Polygon motor (LS250)
2 Polygon motor (LS210)
34 0 M2, L1 Shading correction operation
36 0 LDB Laser PWM (0 to 255)
37 0 LDB, Laser turns ON forcibly The polygon motor (M5) turns ON
M5 and OFF at the same time.
38 0 LDB, LD alarm check The polygon motor (M5) turns ON at
M5 the same time and the results are dis-
played when it turns OFF.
999 LD alarm, data clear
39 0 L1 Platen stop APS The exposure lamp turns ON with
APS processed forcibly.
40 1 M11 Fusing motor (LS250)
2 Fusing motor (LS210)
3 Fusing motor (LS125)
41 1 M1 Drum motor (LS250) The charging corona turns ON at the
same time.
Field Service Ver.1.0 May. 2008 10. SERVICE MODE
70 6 M11 Tray lift motor initial operation After the tray goes down, it goes up
when the lower limit sensor (PS14)
turns ON and it stops when PS15
turns ON. It becomes valid after exe-
cuting the load check 70-5.
7 M12 Shutter close/open operation once At the same time, the paper exit roller
release/pressure operation is made
by the paper exit roller release motor
(M6).
8
9
10
11 M6 Release/press operation of exit roller
once
12 M9 Open/close operation once of paper
exit opening (SD)
13
14
15
16
17 M7 After 2-staple positioning, home posi-
tion search
18
19
20
21
22
23 M10, Folding once (SD)
M14
24 to 52
53 M1, Exit motor (1 second ON), stacker
SD1 paddle solenoid ON/OFF
54 M1, Exit motor (1 second ON), exit paddle
SD2 solenoid ON/OFF
55 to 77
78 M1 Punching once (PU)
79 M2 Switching the number of punches Inch only
10. SERVICE MODE Field Service Ver.1.0 May. 2008