Professional Documents
Culture Documents
P.T.O. GEARBOXES
Technical Catalogue
January
2018
web edition
®
P.T.O. Gearboxes
Table of contents
Introduction ........................................................................................................................................2
ML32 Speed increaser gearbox for pumps GR.2 with European unified flange .......................4
ML52 Speed increaser gearbox for pumps GR.2/3 with European unified flange ...................6
ML52/SAE A-B Speed increaser gearbox for pumps SAE A/B ................................................................8
ML52/B Speed increaser gearbox with through-shaft for pumps GR.2/3
with European unified flange .......................................................................................10
B-585/A Speed increaser gearbox for pumps SAE A ..................................................................12
B-585/B Speed increaser gearbox for pumps SAE B ..................................................................14
B-585/P Speed increaser gearbox for pumps GR.2 / 3 ...............................................................16
B-585/U Speed increaser gearbox for universal flanges ............................................................18
B580 Speed increaser gearbox for pumps with European unified flange / SAE / ISO ..........20
B600 Speed increaser gearbox for pumps with European unified flange / SAE / ISO ..........22
B502 Splitter for pumps with European unified flange GR 2/3 - SAE A/B ............................24
B582 Splitter gearbox for pumps with European unified flange / SAE / ISO ........................26
B602 Splitter gearbox for pumps with European unified flange / SAE / ISO ........................28
Flanges Flanges for speed increaser and pump drivers .............................................................30
© 2018 Dana Brevini S.p.A. all rights reserved. Hydr-App, SAM Hydraulik, Aron, Brevini Hydraulics, BPE Electronics, VPS Brevini, OT Oiltechnology, logos are
trademarks or are registered trademarks of Dana Brevini S.p.A. or other companies Dana in Italy and other countries.
The technical features supplied in this catalogue are non binding and no legal action can be taken against such material. Dana Brevini will not be held responsi-
ble for information and specifications which may lead to error or incorrect interpretations. Given the continuous technical research aimed at improved technical
features of our products, Dana Brevini reserves the right to make change that are considered appropriate without any prior notice. This catalogue cannot be
reproduced (in while or in part) without the prior written consent of Dana Brevini. This catalogue supersedes all previous ones.
Use of the products in this catalogue must comply with the operating limits given in the technical specifications. The type of application and operating condi-
tions must be assessed as normal or in malfunction in order to avoid endangering the safety of people and/or items.
IE/INTRO/02-2017 1
®
Introduction
GENERAL FEATURES
This catalog shows the characteristics of the gearboxes (speed in- In the gearbox technical data table, we have 2 torque values.
creasers) ML and B series, and gearboxes (speed reducers) RD. Maximum starting torque (C1) and maximum torque for con-
Gearboxes are gerally used for the connection of hydraulic pump with tinuous duty (C2).
low speed tractor power take-off.
If gearbox works with torque values that do not exceed C2, the aver-
Calculation for gears was done according to UNI ISO 6336. age torque Cm corresponds to value C2 and duration of the gear is
Calculation for bearing was done according to ISO 281. about 3500 hours. In mixed duty cycles, the transmitted torque can
reach the limits of the maximum starting torque (C1).
Operating temperature is between -20 °C to + 85 °C.
A typical example of mixed duty cycle is shown in the following dia-
Materials used for the components of gear have been chosen accord- gram:
ing to the study of different requirements of resistance to stress and
wear. In particular, the gears are made of hardened steel for high en-
durance. Housing and cover can be made both in aluminum alloy or
cast iron, depending on the required code.
C1
Assembly of gearbox must be performed referring to the position of
Toeque
the level indicator, oil drain and vent/fill plug.
In a mixed duty cycle the value of the average torque (Cm) can be cal-
culated with a formula that takes into account the torques transmitted
with different duty cycles (as required by standard).
3
C1³ • u1 + C2³ • u2 + C..³ • u..
If it is not possible, gearboxes should be bound with a torque arm “B” Cm =
(u1 + u2 + u..)
(see figure). To avoid abnormal stress to the system, the torque arm
“B” must be placed as close as possible to the mounting plane (PTO
Where:
side) of gearbox.
Cm = average torque (pump side);
C1 = maximum starting torque (pump side);
C2 = Maximum torque for continuous duty (pump side)
C.. = .. more torque (pump side)
Determination of the average duration of the gear
The duration of the gearboxes depends on the working conditions and u1 =% duty cycle - C1 torque
the torques transmitted. u2 =% duty cycle - C2 torque
u.. =% duty cycles - C.. torque
In the technical specifications of each gearbox is shown a graph that
allows to verify their duration (in hours) as a function of transmitted
average torque.
2 IE/INTRO/01-2015
®
Introduction
GENERAL FEATURES
hours
Example of calculation of gearboxes duration: 6000
Speed increaser ML32 - transmission ratio 1: 2.5 - rpm 1000
5500
5000
Operating torque:: Duty cycles:
C1 = 100 Nm u1 = 10% 4500
C2 = 65 Nm u2 = 30% 4000
C3 = 40 Nm u3 = 60% 3500
3000
3 2500
100³ • 10 + 65³ • 30 + 40³ • 60
Cm = = 60.4 Nm 2000
(10 + 30 + 60)
1500
1000
9 876 5 4 3 2 1
0
Output (transmission ratio) 40 50 60 70 80 90 100 110 120 130 140 150 160 170 Nm
Input
rpm 30 40 50 60 70 80 90 100 110 120 lbf·ft
1 : 1,5 1:2 1 : 2,5 1:3 1 : 3,5 1 : 3,8
Average torque on pinion (Cm)
curve 1 3 5 6 8 8
540
rpm 810 1080 1350 1680 1836 2052
In diagram curve number 7 has to be considered (gear ratio 1: 2.5 at
curve 2 4 7 — — —
1000 1000 rpm). The estimated duration of the average torque of 60.4 Nm
rpm 1500 2000 2500 — — — is approximately 3600 hours.
Lubricating oil
The types of oil, in the following table, are those suggested for the For features that are outside the range of proposed values, please
correct lubrication of the gears and are differentiated according to the contact our sales department.
temperature at which gearboxes have to work.
For high torque, we recommend the use of oil type “EP (extreme pres-
sure).
The gearboxes technical data shows the amount of oil for proper use. It is recommended to replace the lubrica-
ting oil after the first 50 hours of operation, after every 1000 hours or every 6 months.
IE/INTRO/01-2015 3
®
ML32
SPEED INCREASER GEARBOX FOR PUMPS GR.2 WITH EUROPEAN UNIFIED FLANGE
86.62 [3.410]
Ø 36.5 [Ø 1.437]
71.5 [2.815] 2LO¿OOLQJFDS
7.5 [0.295]
N° 4 M8
t.u. 13 [dept 0.51]
0RXQWLQJKROHV
No. 4 M10
114 [4.489]
96 [3.779]
INT. 76 [2.992]
side
Pump
219 [8.622]
]
372W\SH
-0.002
-0.004
[Ø 3.228
2LOOHYHOSOXJ
90°
2LOGUDLQSOXJ 4 [0.157] 85 [3.346] Ø 130 [Ø 5.118]
156 [6.141] mm [inches]
Ø 69 [Ø 2.716]
70 [2.756]
Ø 49.5 [Ø 1.949]
38.1
[1.5] 45 4.5
[1.772] [0.177]
45 [1.772]
1 2-18 12 3-19 1 2 3
ORDERING CODE
4 IE/ML32/02-2017
®
ML32
TECHNICAL DATA
SPARE PARTS
11
8 12
23 22 15 17
16 13
10
PTO 12
21
8
5 PTO 3
PTO 19 19
4 PTO 2
PTO 18 20
PTO 1
9 10 1
16 3 2 18 24
6
When ordering spare parts, specify
7 reference number, gearbox model, PTO
14
type and transmission ratio.
IE/ML32/02-2017 5
®
ML52
SPEED INCREASER GEARBOX FOR PUMPS GR.2/3 WITH EUROPEAN UNIFIED FLANGE
N°4 M10
285.1 [11.224]
[dept 0.7]
256.5 [10.098]
0RXQWLQJ
KROHV
INT. 91 [3.582]
INT.102
[4.016]
42.4 [1.669]
]
128 [5.039]
-0.002
[Ø 3.228 -0.004
-0.05
Ø 82 -0.10
114 [4.489] *
N°4 M8
t.u. 13
2LOOHYHOSOXJ
[dept 0.51]
95.7 [3.766] OI
L
OI
L
44 [1.732] 44 [1.732]
Ø 49.5 [Ø 1.949]
Ø 69 [Ø 2.716]
Ø 50 [Ø 1.968]
70 [2.756]
38.1
[1.5] 48 9
[1.889] [0.354]
49 [1.928]
1 2-18 12 3-19 1 2 3 4
ORDERING CODE
Flange
ML52 = Speed increaser (aluminium body) Omit for pumps GR.3
C = predisposition for pumps GR.2 - GR.3
P.T.O. S = SAE A - see page 30
1 = Male 1” 3/8 DIN 9611 T = SAE B - see page 30
2 = Female 1” 3/8 DIN 9611
3 = Female 1” 3/8 DIN 9611 + tightening Mounting positions
12 = Female 1” 3/8 DIN 9611 short 1/2/3/4
18 = Female z21 - 16/32 DIN 9611
19 = Female z21 - 16/32 DIN 9611 + tightening Transmission ratio
1 = 1 : 1.0
Coupling for pump to be required to our sales
1,5 = 1 : 1.5
department.
2 = 1 : 2.0
2,6 = 1 : 2.6
3 = 1 : 3.0
3,4 = 1 : 3.4
3,8 = 1 : 3.8
6 IE/ML52/02-2017
®
ML52
TECHNICAL DATA
SPARE PARTS
5 6 7
1
3 4
PTO 12
8 11
PTO 2
21 22 7 PTO 18
9 10
PTO 3
PTO 19
14
20 15
23 PTO 1
15 16
27 26 25 24
13
IE/ML52/02-2017 7
®
ML52/SAE A-B
SPEED INCREASER GEARBOX FOR PUMPS SAE A/B
200 [7.874]
91.250 [3.593]
N°4 M12 t.u. 17 [depth 0.669] 0RXQWLQJ
2LO¿OOLQJFDS 3 [0.118]
KROHV
Pump
P.T.O. side
side
285.1 [11.224]
110 [4.33]
256.5 [10.098]
INT. 102 [4.018]
[1.114]
372W\SH
28.3
91 [3.582]
2LOOHYHOSOXJ
SAE A:
N° 2 M10 T.U. 18[depth 0.71]
8 [0.315] SAE B: 12.5 [0.492] 2LOGUDLQSOXJ
N° 2 M12 T.U. 18 [depth 0.71] 92.5 [3.642]
SAEA: 106.4 [4.189] 19.55 [0.770]
SAEB: 146 [5.748]
109 [4.3] INT. 110 [4.331]
mm [inches]
Ø 69 [Ø 2.716]
Ø 50 [Ø 1.968]
70 [2.756]
38.1
[1.5] 48 9
[1.889] [0.354]
49 [1.928]
1 2-18 12 3-19 1 2 3 4
ORDERING CODE
8 IE/ML52/01-2017
®
ML52/SAE A-B
TECHNICAL DATA
SPARE PARTS
8
28
19
5 6 7
12
1
3 4
PTO 12
8 11
PTO 2
21 22 7 PTO 18
9 10
15
PTO 3
16
PTO 19
20 28 14
23 PTO 1
15
27 26 25 24
13
When ordering spare parts, specify
19 17 reference number, gearbox model, PTO
type and transmission ratio.
IE/ML52/01-2017 9
®
ML52/B
SPEED INCREASER GEARBOX WITH THROUGH-SHAFT FOR PUMPS GR.2/3 WITH EUROPEAN UNIFIED FLANGE
372W\SH
285.2 [11.228]
256.5 [10.098]
314 [12.362]
INT. 102 [4.016]
-0.002
[Ø 3.228 -0.004 ]
-0.05
Ø 82 -0.10
96 [3.78]
128 [5.039]
32.35 [1.274]
42.4 [1.669]
2LOOHYHOSOXJ
N°4 M12
OI
0.6 1.15 70 45 L
44
[0.045]
[1.508]
[Ø1.929]
[Ø1.929]
Ø 49
Ø 49
[Ø1.378]
38.1
Ø35
[1.5] 40 40
96 10 E8 94 [3.7] 96 [3.780] 94 [3.7] [1.575] [1.575]
[3.780] [0.393]
Ø49.95
Ø49.95
38.1 37 38.1
]
[Ø 1.949 -0.0062 ]
+0.0013
[Ø1.929 +0.0003
0
0
ORDERING CODE
P.T.O.
4 = Female/Female Ø 35 short Mounting positions
6 = Male/Male 1” 3/8 DIN 9611 1/2/3/4
7 = Female/Female 1” 3/8 DIN 9611
8 = Female/Male 1” 3/8 DIN 9611 Transmission ratio
15 = Female/Female 1” 3/8 DIN 9611 short 1 = 1 : 1.0
23 = Male 50x45 Z=24 DIN 5482 1,5 = 1 : 1.5
Male 1” 3/8 DIN 9611 2 = 1 : 2.0
2,6 = 1 : 2.6
Coupling for pump to be required to our sales
3 = 1 : 3.0
department.
3,4 = 1 : 3.4
3,8 = 1 : 3.8
10 IE/ML52-B/02-2017
®
ML52/B
TECHNICAL DATA
SPARE PARTS
12 13
10
3 2
6 7 8 9
PTO 23
PTO 6
15
4 5
PTO 8 14
16 15
PTO 7
1 2 3
PTO 4 17
11 PTO 15
19
22 19 21 20
18
24
23
When ordering spare parts, specify
reference number, gearbox model, PTO
type and transmission ratio.
IE/ML52-B/02-2017 11
®
B-585/A
SPEED INCREASER GEARBOX FOR PUMPS SAE A
P.T.O. Pump
20.5 [0.807]
30 [1.181]
108 [4.252]
91 [3.583]
[Ø 4.252 +0.0014 ]
372W\SH
+0.035
92 [3.622]
0
0
313 [12.323]
Ø 108
140 [5.511]
109 [4.291]
75.2 [2.960]
[Ø3.25 +0.0014 ]
Ø82.55 +0.035
2LOOHYHOSOXJ
0
N°4 M12
OI OI
L L
OI
L
91 [3.583] 44 [1.732] 44 [1.732]
70 [2.756]
Ø69 [Ø2.716]
Ø69 [Ø2.716]
38.1[1.5]
1 3 19
1 2 3
ORDERING CODE
P.T.O.
1 = Male 1” 3/8 DIN 9611 Coupling
3 = Female 1” 3/8 DIN 9611 + tightening 00 = No Coupling
19 = Female z21 - 16/32 DIN 9611 + tightening 02 = Z=18 BF3/2
2T = Z=18 BF3/2T
03 = Z=18 BF3
Transmission ratio
Pinion internal teeth
1 = 1 : 1.0 3,8 = 1 : 3.8 A0 = Z13 16/32”
1,5 = 1 : 1.5 4 = 1 : 4.0 B0 = Z15 16/32”
2 = 1 : 2.0 4,3 = 1 : 4.3 C0 = Z18 DIN 5482
(from 1/1.0 to 1/3.8 transmission ratio)
2,5 = 1 : 2.5 4,5 = 1 : 4.5
3 = 1 : 3.0 5 = 1 : 5.0 Mounting positions
3,5 = 1 : 3.5 1/2/3
12 IE/B-585-A/01-2017
®
B-585/A
TECHNICAL DATA
SPARE PARTS
18
15
5
B- de y
58 = =
Co l q.t
5 xx kg.
Oi
xx x.x
R xx Da
xx x
= xx te
xx
1 xx =
/ x.x x xx
x
25
17
29
19
17
PTO 19
16
28
12
PTO 3 6 8
4
23 1
17
6 PTO 1 11 17
9 7
14 24
31
2
30
Pignone When ordering spare parts, specify
7 R:1/1 R:1/1.5
13 Pinion reference number, gearbox model, PTO
10 32 type and transmission ratio.
IE/B-585-A/01-2017 13
®
B-585/B
SPEED INCREASER GEARBOX FOR PUMPS SAE B
30 [1.181]
91 [3.583]
]
372W\SH
+0.0014
+0.035
92 [3.622]
0
0
Ø 108
313 [12.323]
[Ø 4.252
109 [4.291]
140 [5.511]
75.2 [2.960]
Ø101.6 +0.035
]
0
+0.0014
N°4 M12
0
2LOGUDLQSOXJ
[Ø4
N°2 M12 *´
*´ t.u. 18 [depth 0.71) mm [inches]
146 [5.748] 29.5 [1.161] 63 [2.48] 10 [0.394]
OI OI
L L
OI
L
91 [3.583] 44 [1.732] 44 [1.732]
70 [2.756]
Ø69 [Ø2.716]
Ø69 [Ø2.716]
38.1[1.5]
1 3 19
1 2 3
ORDERING CODE
P.T.O.
1 = Male 1” 3/8 DIN 9611 Coupling
3 = Female 1” 3/8 DIN 9611 + tightening 00 = No Coupling
19 = Female z21 - 16/32 DIN 9611 + tightening 02 = Z=18 BF3/2
2T = Z=18 BF3/2T
03 = Z=18 BF3
Transmission ratio
1 = 1 : 1.0
1 3.8 = 1 : 3.8
3,8 3,8 Pinion internal teeth
A0 = Z13 16/32”
1.5 = 1 : 1.5
1,5 1,5 4 = 1 : 4.0
4
B0 = Z15 16/32”
2 = 1 : 2.0
2 4.3 = 1 : 4.3
4,3 4,3 C0 = Z18 DIN 5482 (only until 1/3.8 ratio)
2.5 = 1 : 2.5
2,5 2,5 4.5 = 1 : 4.5
4,5 4,5
3 = 1 : 3.0
3 5 = 1 : 5.0
5 Mounting positions
3.5 = 1 : 3.5
3,5 3,5 1/2/3
14 IE/B-585-B/01-2017
®
B-585/B
TECHNICAL DATA
SPARE PARTS
18
15
5
B- de y
58 = =
Co l q.t
5 xx kg.
Oi
xx x.x
R xx Da
xx x
= xx te
xx
1 xx =
/ x.x x xx
x
25
17
29
19
17
PTO 19
16
28
12
PTO 3 6 8
4
23 1
17
6 PTO 1 11 17
9 7
14 24
31
2
30
Pignone When ordering spare parts, specify
7 R:1/1 R:1/1.5
13 Pinion reference number, gearbox model, PTO
10 32 type and transmission ratio.
IE/B-585-B/01-2017 15
®
B-585/P
SPEED INCREASER GEARBOX FOR PUMPS GR.2/3
P.T.O. Pump
20.5 [0.807]
30 [1.181]
108 [4.252]
91 [3.583]
313 [12.323]
]
372W\SH
+0.0014
+0.035
92 [3.622]
0
0
Ø 108
[Ø 4.252
140 [5.511]
109 [4.291]
42.4 [1.669]
32.4 [1.275]
128 [5.039]
96 [3.779]
75.2 [2.960]
[Ø1.437]
Gr.2: Ø36.5
Gr.3: Ø50.8
[Ø 2]
2LOOHYHOSOXJ
*´ 120 [4.724] 110 [4.331]
N°4 M12
OI OI
L L
OI
L
91 [3.583] 44 [1.732] 44 [1.732]
70 [2.756]
Ø69 [Ø2.716]
Ø69 [Ø2.716]
38.1[1.5]
1 3 19
1 2 3
ORDERING CODE
P.T.O.
1 = Male 1” 3/8 DIN 9611 Coupling
3 = Female 1” 3/8 DIN 9611 + tightening 00 = No Coupling
19 = Female z21 - 16/32 DIN 9611 + tightening 02 = Z=18 BF3/2
2T = Z=18 BF3/2T
03 = Z=18 BF3
Transmission ratio
1 = 1 : 1.0
1 3.8 = 1 : 3.8
3,8 3,8 Pinion internal teeth
A0 = Z13 16/32”
1.5 = 1 : 1.5
1,5 1,5 4 = 1 : 4.0
4
B0 = Z15 16/32”
2 = 1 : 2.0
2 4.3 = 1 : 4.3
4,3 4,3 C0 = Z18 DIN 5482 (only until 1/3.8 ratio)
2.5 = 1 : 2.5
2,5 2,5 4.5 = 1 : 4.5
4,5 4,5
3 = 1 : 3.0
3 5 = 1 : 5.0
5 Mounting positions
3.5 = 1 : 3.5
3,5 3,5 1/2/3
16 IE/B-585-P/01-2017
®
B-585/P
TECHNICAL DATA
SPARE PARTS
18
15
5
B- de y
58 = =
Co l q.t
5 xx kg.
Oi
xx x.x
R xx Da
xx x
= xx te
xx
1 xx =
/ x.x x xx
x
25
17
29
19
17
PTO 19
16
28
27
12 26
PTO 3 6 8 Pompe
4 Gr.3
Pumps
23 1
Pompe
Gr.2
Pumps
17
6 PTO 1 11 17
9 7
14 24
31
2
30
Pignone When ordering spare parts, specify
7 R:1/1 R:1/1.5
13 Pinion reference number, gearbox model, PTO
10 32 type and transmission ratio.
IE/B-585-P/01-2017 17
®
B-585/U
SPEED INCREASER GEARBOX FOR UNIVERSAL FLANGES
P.T.O. Pump
20.5 [0.807]
30 [1.181]
91 [3.583]
+0.0014
+0.035
92 [3.622]
0
0
313 [12.323]
Ø 108
[Ø 4.252
140 [5.511]
109 [4.291]
72.5 [2.854]
75.2 [2.960]
]
Ø95 [Ø] +0.035
+0.0014
0
N°4 M12
0
110 [4.331] 110 [4.331]
[Ø3.74
2LOGUDLQSOXJ
2LOOHYHOSOXJ
*´ 29.5 [1.161] 63 [2.48] 10 [0.394]
mm [inches]
125.57 [4.943] *´
OI OI
L L
OI
L
91 [3.583] 44 [1.732] 44 [1.732]
70 [2.756]
Ø69 [Ø2.716]
Ø69 [Ø2.716]
38.1[1.5]
1 3 19
1 2 3
ORDERING CODE
Flange
P.T.O. Variants
1 = Male 1” 3/8 DIN 9611 00 = No variant
3 = Female 1” 3/8 DIN 9611 + tightening
19 = Female z21 - 16/32 DIN 9611 + tightening
Type Flange position
Transmission ratio (see page 30 - 31) 1 2
1 = 1 : 1.0 3 = 1 : 3.0
D/G
1,5 = 1 : 1.5 3,5 = 1 : 3.5
2 = 1 : 2.0 3,8 = 1 : 3.8
2,5 = 1 : 2.5 E/F
18 IE/B-585-U/01-2017
®
B-585/U
TECHNICAL DATA
SPARE PARTS
18
15
5
B- de y
58 = =
Co l q.t
5 xx kg.
Oi
xx x.x
R xx Da
xx x
= xx te
xx
1 xx =
/ x.x x xx
x
25
17
29
19
17
PTO 19
16
28
12
PTO 3 6 8
4
23 1
17
6 PTO 1 11 17
9 7
14 24
31
2
30
Pignone
7 R:1/1 R:1/1.5
13 Pinion
10 32
IE/B-585-U/01-2017 19
®
B580
SPEED INCREASER GEARBOX FOR PUMPS WITH EUROPEAN UNIFIED FLANGE / SAE / ISO
°
2LOOHYHOFXS
60
Universal flanges page 30 - 31
111.5 [4.39]
6x
N°
372W\SH
-0.0014
[Ø 4.724 -0.0035 ]
-0.036
-0.090
Ø 120
335.8 [13.220]
INT. 102 [4.017]
325 [12.796]
51 [2.008]
P.T.O.
side
A 40x36 DIN5482
2LOGUDLQSOXJ Pump side
Ø 165 [Ø 6.496] INT. 155 [6.102]
mm [inches]
Ø69 [Ø2.716]
M12
38.1
[1.5] 66 4.5 [0.177] 25
]
[2.6] [0.984]
+0.0016
[1.575 +0.0008
+0.041
Ø 40 +0.020
74 [2.913]
1 2 3
1 2-18 3-19 5
ORDERING CODE
Flange
B580 - ** -1/ *** - * - * *
Type Flange position
(see page 30 - 31) 1 2
D/G
P.T.O. A/B/C/L/M —
1 = Male 1” 3/8 DIN 9611
2 = Female 1” 3/8 DIN 9611 Mounting positions
3 = Female 1” 3/8 DIN 9611 + tightening 1/2/3
5 = Male Z23 DIN 5482
18 = Female z21 - 16/32 DIN 9611 Transmission ratio
19 = Female z21 - 16/32 DIN 9611 + tightening 1 = 1 : 1.0
1,5 = 1 : 1.5
Coupling for pump to be required to our sales
2 = 1 : 2.0
department.
2,6 = 1 : 2.6
3 = 1 : 3.0
3,4 = 1 : 3.4
4 = 1 : 4.0
4,8 = 1 : 4.8
20 IE/B580/02-2017
®
B580
TECHNICAL DATA
SPARE PARTS
24 23 25
26 24
10 2 8
30 28 27 7 9 13
21 33 32 31 4
15 17
PTO 3
PTO 19
22 PTO 1
PTO 2 24 26
14 12 PTO 18
5 6 25 1 PTO 5 24 3
16 8 26
20 11 13 29
13
25
When ordering spare parts, specify
reference number, gearbox model, PTO
25 type and transmission ratio.
IE/B580/02-2017 21
®
B600
SPEED INCREASER GEARBOX FOR PUMPS WITH EUROPEAN UNIFIED FLANGE / SAE / ISO
°
60
372W\SH
6x
N°
[Ø 4.724 -0.0035 ]
-0.0014
-0.036
Ø 120 -0.090
335 [13.189]
368 [14.488]
INT. 122 [4.80]
[1.5]
M12
4.5 [0.177] 25
96 [3.778] [0.984]
]
+0.0016
[1.575 +0.0008
+0.041
Ø 40 +0.020
1-20 2 5 1 2 3
ORDERING CODE
Flange
B600 - ** -1/ *** - * - * *
Type Flange position
(see page 30 - 31) 1 2
D/G
B600 = Speed increaser (aluminium body)
E/F
P.T.O.
1 = Male 1” 3/8 DIN 9611 A/B/C/L/M —
2 = Female 1” 3/8 DIN 9611
Mounting positions
5 = Male Z23 DIN 5482
1/2/3
20 = Male 1” 3/4
22 IE/B600/02-2017
®
B600
TECHNICAL DATA
SPARE PARTS
13
12
24 23
6 7 8 9 4 10 11
PTO 20
14
PTO 5
4
5 PTO 1 11
PTO 2
1 2 3
21 22
19 8 18 17 10 16 12 15
20
IE/B600/02-2017 23
®
B502
SPLITTER FOR PUMPS WITH EUROPEAN UNIFIED FLANGE GR 2/3 - SAE A/B
353 [13.898]
P.T.O.
96 [3.78] 128 [5.039]
98.2 [3.866]
71.5 [2.815]
1
Pump 18
[Ø 1.948]
side
Ø 49.5
103 [4.055]
N° 8 M8 N° 12 M10
t.u 22 [depth 0.866] -0.036 t.u 22 [depth 0.866]
Ø 120 -0.058
-0.0014
[Ø 4.724 -0.0023 ]
372W\SH 44
[1.732] 73 [2.874]
38 [1.494]
37 [1.457]
Ø 69 [Ø 2.716]
104.4 [4.11]
M12
4 [0.157]
5
19
8
[0.315]
[1.575 +0.0008 ]
+0.0016
+0.041
+0.020
29.5
[1.161]
6.6 [0.26]
Ø 40
Gr.3: Ø50.8 [Ø 2] A 35x31 DIN 5482
2LO¿OOLQJFDSDQGOHYHO
Mounting positions
218.5 [8.602]
P.T.O.
116 [4.567]
155 [6.102]
190 [7.48]
side
60°
ORDERING CODE
SXPS SXPS
24 IE/B502/02-2017
®
B502
TECHNICAL DATA
SPARE PARTS
15
16 17
13 14 28
16 17
9 10 11 12 11 12
5 6 7 8
PTO 3 28
PTO 19
4 18
27 19 12
1 2 3
PTO 1
11 12 11
22
PTO 5
PTO 2
PTO 18
21 20
25 24 23
IE/B502/02-2017 25
®
B582
SPLITTER GEARBOX FOR PUMPS WITH EUROPEAN UNIFIED FLANGE / SAE / ISO
100 [3.937] 42
pump pump [1.653]
2 1
236 [9.29]
Ø 49.5 [Ø1.95]
207 [8.15]
2
1
18
64
[2.519]
2LOGUDLQSOXJ -0.036 N°5 M12
Ø 120 -0.058 t.u. 20 [dept 0.78]
-0.0014
[Ø 4.724 -0.0023 ]
4 [0.157]
[1.575 +0.0008 ]
+0.0016
44
+0.041
+0.020
75 [2.952]
[1.732]
372W\SH
Ø 40
38 [1.494]
Ø 69 [Ø2.716]
37.5 [1.47]
3
112 [4.409]
M12
19 5
8
[0.315]
29.5
[1.161]
0 0 A 40x36 DIN 5482
Ø85 +0.035 [Ø3.345 +0.0014 ]
0
0
Ø95 +0.035 [Ø3.739 +0.0014 ] Universal flanges page 30 - 31
N°6 M12 t.u. 20 [dept 0.78]
P.T.O. N°4 M12
side t.u. 20 [dept 0.78]
Mounting positions
INT. 155 [6.102]
60°
84 [3.307]
mm [inches]
376 [14.803]
421 [16.575]
ORDERING CODE
ÀDQJH ÀDQJH
SXPS SXPS
P.T.O. E/F
1 = Male 1” 3/8 DIN 9611
2 = Female 1” 3/8 DIN 9611 A/B/C/L/M —
(1) G1 only on pump 2 - G2 only on pump 1
3 = Female 1” 3/8 DIN 9611 + tightening
5 = Male Z23 DIN 5482 Transmission ratio
18 = Female z21 - 16/32 DIN 9611
19 = Female z21 - 16/32 DIN 9611 + tightening 1 = 1 : 1.0 3 = 1 : 3.0
Coupling for pump to be required to our sales 1,5 = 1 : 1.5 3,4 = 1 : 3.4
department. 2 = 1 : 2.0 4 = 1 : 4.0
2,6 = 1 : 2.6 4,8 = 1 : 4.8
26 IE/B582/02-2017
®
B582
TECHNICAL DATA
SPARE PARTS
17 18 19 20 20
14 16
15
4 5 6 7 8 9
PTO 3 13 3 3
PTO 19
12 21 18 19
11
PTO 1 16
1 2 3 10
3 14 14
22
PTO 2
PTO 18
3 11 23
PTO 5
33 32 31
28 27 26 25 24
IE/B582/02-2017 27
®
B602
SPLITTER GEARBOX FOR PUMPS WITH EUROPEAN UNIFIED FLANGE / SAE / ISO
[1.575 +0.0008 ]
+0.0016
+0.041
+0.020
94 [3.7] 70 [2.762]
Ø 40
38.1 38 [1.494]
[1.5]
256.2 [10.09]
233 [9.173]
Pump
M12
1 5
60°
side
8
98 [3.858] [0.315]
29.5
[1.161]
372W\SH
65 [2.56]
94 [3.7]
45 [1.77]
44 [1.732]
121 [4.764]
38.1
[1.5]
2 20
[Ø1.948]
70 [2.756]
4 [0.157]
Ø 49.5
Ø95 +0.035
[Ø3.74 +0.0014 ]
0 A50x45 96 [3.785]
INT. 122 INT. 122 DIN 5482
[4.803] [4.803]
Universal flanges
page 30 - 31 INT. 155 [6.102] N°4 M12 76.5
t.u. 27 [1.06] [3.012]
Mounting positions
[2.835]
P.T.O.
72
side
N° 10 M12
t.u. 26 [1.02] mm [inches]
60°
60°
ORDERING CODE
ÀDQJH ÀDQJH
SXPS SXPS
28 IE/B602/02-2017
®
B602
TECHNICAL DATA
SPARE PARTS
15 4
13 14
3 12 12
8 9
11
4
PTO 20
PTO 5
14
6 7 16
5 17
1 2 2
5 2 3 18
PTO 1
PTO 2
20 6 19
10 2
IE/B602/02-2017 29
®
Flanges
FLANGES ML52-B502
25 [0.984] A
M10 (n.4)
A A
[Ø 3.249]
Ø 82.55
M 12 (n.2)
A
12 [0.472]
[0.984]
INT. 106.4 [4.188]
25
Ø 101.6 [Ø 4]
INT. 146 [5.748]
N° 6 M12
t.u. 20 [0.78]
25 [0.984]
A
[Ø 3.346 +0.0014 ]
[Ø3.74 +0.0014 ]
INT.106.4 [4.188]
Ø 85 +0.035
+0.035
0
0
0
[Ø 3.249]
Ø 82.55
0
Ø 95
M10 (n.8) A
4 [0.157]
t.u. 15 [0.59]
145 [5.708] 9 [0.354]
A
M 16 (n.2)
15 [0.590]
25 [0.984] A
INT. 181 [7.125]
Ø 127 [5]
M 14 (n.4)
Ø 101.6 [Ø 4]
A
]
77
.3
[6
162
T.
A
IN
28 [1.10]
30 IE/FLANGE/02-2017
®
Flanges
26.5 [1.043]
43 [1.692]
A
M10 (n.4)
M12 (n.4)
Ø 125 [Ø 4.921]
45°
Ø 100 [Ø 3.936]
160 [6.3]
]2
.9
[4
25 33 [1.3] A
A
1
T.
IN
21 [0.826]
A
Ø 160 [Ø 6.299]
Type “P”
ISO 3
Kit flange and screws: 14050060
N° 4 M16
A t.u. 43 [1.692]
57 [2.244]
A A
[Ø 1.437]
Ø 36.5
N° 4 M8 t.u. 15 [0.59]
Ø 50.8 [2]
96 [3.779]
128 [5.039]
42.4 [1.669]
[1.275]
M10 (n.4)
32.4
A
A
22 [0.866] 71.5
22 [0.866] 98.2 [3.653]
[2.814]
143 [5.629]
M10 (N.4) A
A 36 [1.417]
[Ø 2.374]
Ø 60.3
149.5 [5.885]
49.3 [1.940]
188 [7.40]
64.5 [2.539]
Ø 63.5 [Ø 2.5]
A
114.5 [4.507] 24.5 [0.964]
M12 (N.4) A
IE/FLANGE/02-2017 31
®
RD33/SAE
SPEED REDUCER GEARBOX SAE A
]
+0.0028
+0.0014
[dept 0.787]
+0.071
+0.036
[Ø 3.250
Ø 82.55
[0.614]
INT. 76 [2.992]
15.6
220 [8.650]
-0.002
[3.228 -0.004
[Ø 0.984 +0.001
+0.002
]
[1.508]
38.3
+0.05
Ø 25 +0.03
-0.05
Ø 82 -0.1
Oil level
SOXJ
+0.034
Ø 35 +0.009
[Ø 1.378 +0.0013
+0.0004 ] Outlet
6KDIWW\SH4 shaft
45° 45°
2LOGUDLQSOXJ +0.047
10 +0.025
+0.0019
mm [inches]
[0.394 +0.0001 ] 84.374 [3.322] 156 [6.141]
9 43.75 10 21 OI
L
[1.722]
2
4 2 15
OI
L
ORDERING CODE
32 IE/RD33-SAE/02-2017
®
RD33/SAE
TECHNICAL DATA
88 46 4,4 0
0.26 0 50 100 150 200 Nm
[65] [34] [9.7]
0 50 100 150 200 250 lbf·ft
* Maximum torque on pump: Average torque on pinion (Cm)
C1= maximum starting torque; C2= maximum torque for continuous duty.
SPARE PARTS
11 12
9 10
6 7 8 4
13
3 4 5
1 2 16 15 14
18 17
16 17 21 20 19
When ordering spare parts, specify
reference number, gearbox model, PTO
type and transmission ratio.
IE/RD33-SAE/02-2017 33
®
RD42/SAE
SPEED REDUCER GEARBOX SAE A
156 [6.142]
94.250 [3.711]
INT. 106.4 [4.189]
N°2 M10 T.U. 20
[depth 0.787] 4 [0.157] 12 [0.472]
2LO¿OOLQJFDS
N° 4 M10 T.U. 16.5
]
+0.071
+0.036
[depth 0.65]
+0.0029
+0.0014
Inlet
Ø82.55
[Ø3.250
INT. 76 [2.992
shaft
20.8
[0.819]
222 [8.740]
- 0.002
Oil level
SOXJ
+0.047
10 +0.025
[0.394 +0.0019
+0.0001 ] +0.034
Outlet
Ø 35 +0.009 83.750 [3.297] 45°
2LOGUDLQSOXJ shaft 45°
[Ø 1.378 +0.0013
+0.0004 ]
mm [inches]
1
58 [2.283] 29.55 [1.163] 22.55 [0.888]
8 [0.315]
OI
L
2
9 10 21
28.1 [1.106]
Ø25+0.05
+0.03
OI
+0.002 L
[Ø 0.984+0.001 ]
ORDERING CODE
34 IE/RD42-SAE/02-2017
®
RD42/SAE
TECHNICAL DATA
1000 3 2 1
0
0 50 100 150 200 250 300 Nm
0 50 100 150 200 250 lbf·ft
Average torque on pinion (Cm)
SPARE PARTS
12
11
6 7 10
8 9
13
3 4 5
15
4 14
1 2
16
17 5
19 9 18
20
IE/RD42-SAE/02-2017 35
®
RD52/SAE A-B
SPEED REDUCER GEARBOX SAE A/B
200 [7.874]
+0.047 91.250 [3.593]
10 +0.025 N°4 M12 t.u. 17 [depth 0.669]
3 [0.118]
2LO¿OOLQJFDS +0.0019
[0.394 +0.0001 ]
Outlet
shaft
38.3 [1.508]
6KDIWW\SH4
285.1 [11.224]
110 [4.33]
256.5 [10.098]
INT. 102 [4.018]
28.300
[1.114]
91 [3.582]
2LOOHYHOSOXJ
SAE A:
N° 2 M10 T.U. 18[depth 0.71]
Inlet
8 [0.315] SAE B: 12.5 [0.492] 2LOGUDLQSOXJ
N° 2 M12 T.U. 18 [depth 0.71]
shaft 92.5 [3.642]
SAEA: 106.4 [4.189] 19.55 [0.770]
SAEB: 146 [5.748] mm [inches]
109 [4.3] INT. 110 [4.331]
1.15 [0.045] 1.15 [0.045] 3.6 [0.142] 41.15 [1.620] 47.6 [1.874] OI
L
94 [3.701] 94 [3.701]
[1.169]
[1.169]
29.7
29.7
40 40
38.1 38.1
[1.5] [1.5] [1.575] [1.575]
4 6 7
+0.0008 ]
[0.984 +0.0016
Ø25 ++ 0.041
0.020
DIN5482
Ø 49 [1.929]
1 2
+0.0003 ]
Ø49 [Ø1.929]
35x31
[Ø 1.378 +0.0013
+0.0008 ]
[0.984 +0.0016
+0.034
+0.009
Ø25 +0.041
+0.020
OI
L
9 16 OI
L
Ø 35
3 4
ORDERING CODE
36 IE/RD52-SAE/02-2017
®
RD52/SAE A-B
TECHNICAL DATA
SPARE PARTS
5 6 7 8 9 10 11
12
13
3 2
1 16 15 14
16 10 19 18 17
4 11
IE/RD52-SAE/02-2017 37
®
RD62/SAE A-B
SPEED REDUCER GEARBOX SAE A/B
INT.110 [4.331]
[Ø3.228 - 0.004 ]
- 0.002
- 0.050
Ø 82 - 0.100
256.5 [10.098]
285.2 [11.228]
102 [4.018]
N°4 M12
t.u.17
[dept 0.67] 2LOOHYHOSOXJ
Inlet
SAE A: shaft
N° 2 M10 T.U. 18 [depth 0.71]
2LOGUDLQSOXJ
SAEA: 106.4 [4.189] SAE B: 12.5 [0.492]
SAEB: 146 [5.748] N° 2 M12 T.U. 18 [depth 0.71]
109 [4.291]
mm [inches]
4 15 1 2
28.3 [1.114]
DIN5482
8 [0.315] OI
35x31
L
+0.047 OI
10 +0.025 L
[0.394 +0.0019
+0.0001 ]
16 9
Ø25 ++ 0.041
0.020
ORDERING CODE
Mounting positions
RD62/SAE A = Speed reducers (cast iron body) 1/2/3/4
RD62/SAE B = Speed reducers (cast iron body)
Input shaft
Output shaft 9 = Female Ø 25
4 = Female Ø 35 mm 16 = Female Z18 DIN 5482 (35x31)
15 = Female 1” 3/8 DIN 9611 (short)
Transmission ratio
Coupling for pump to be required to our sales 0,66 = 1.5 : 1
department. 0,50 = 2.0 : 1
0,38 = 2.6 : 1
0,33 = 3.0 : 1
0,29 = 3.4 : 1
0,26 = 3.8 : 1
38 IE/RD62-SAE/02-2017
®
RD62/SAE A-B
TECHNICAL DATA
SPARE PARTS
11 12 13 14 15
9 10 4
5 6 7 8
12
1 3 4
17 16
17 10 19 18
IE/RD62-SAE/02-2017 39
®
RD62/B
SPEED REDUCER GEARBOX WITH PTO FOR UNIFIED GR.2/3 PUMPS
6KDIWW\SH4
N°4 M8 Outlet
T.U. 20
shaft
256.5 [10.098]
285.2 [11.228]
42.4 [1.669]
314 [12.362]
N°4 M12
INT. 128 [5.039]
T.U. 17
96 [3.779]
shaft
2LOGUDLQSOXJ
Ø 35 +0.009
[Ø 1.378 +0.0013
+0.0004 ]
38.3 [1.508]
94 [3.701] 94 [3.701]
70 [2.756] 70 [2.756]
1 2
+0.047
38.1 38.1
10 +0.025
+0.0019
[1.5]
6 (M/M) [1.5]
OI
L
[0.394 +0.0001 ]
4 (F/F) OI
L
84 [3.307] 93 [3.661]
69 [2.717]
[Ø1.949 -0.0062 ]
Ø 49.5 -0.16
0
0
3 4
37 38.1
[1.457]
23 (M/M) [1.5]
ORDERING CODE
Mounting positions
1/2/3/4
RD62/B = Speed reducers (cast iron body)
Input shaft
Output shaft
16 = Female Z18 DIN 5482
4 = Female Ø 35 mm
6 = Male/Male 1” 3/8 DIN 9611
23 = Male 50x45 Z=24 DIN 5482 Transmission ratio
Male 1” 3/8 DIN 9611 0,50 = 2.0 : 1
0,33 = 3.0 : 1
Coupling for pump to be required to our sales 0,29 = 3.4 : 1
department.
40 IE/RD62-B/02-2017
®
RD62/B
TECHNICAL DATA
SPARE PARTS
12 13 14 15
16
5 6 10 11 4
17
7 8 9
13
1 4
19 18
19 11 20
IE/RD62-B/02-2017 41
Note
®
42
Note
®
43
Note
®
44
®
Sede legale: Via Luciano Brevini 1/A, 42124 Reggio Emilia - Italy
Tel: +39.0522.9281 - Fax: +39.0522.928300
www.dana.com/brevini - dana.re@dana.com