Professional Documents
Culture Documents
Sheet 2
Modeling of Beams
Using Computer Software and
Comparing Results with manual calculations
1- Using computer software draw B.M.D and deformed shape for the
shown beams under distributed load 2 t/m. The cross section of the beams
is 25cm x 60cm and the main span is 5 m and the short span is 2m. (Note:
ignore shear deformation). Then compare results with manual calculations
values.
Name :
Sec :
B.N :
Draft 2020
Cairo University Exercises on Computer Modeling of Structures
Faculty of Engineering Sheet 2
Structural Engineering Department
Bending moment diagrams and deformed shapes for single span beam
with hinged and fixed supports.
W*L2/8
B.M.D
deformed shape
W*L2/12
B.M.D
deformed shape
W*L2/8
B.M.D
deformed shape
W*L2/8
W*L2/12
W*L2/8
W*L2/8
W*L2/10
deformed shape
deformed shape