Professional Documents
Culture Documents
Experiment No. 01
Page 3
University Of Science & Technology, Bannu
Department of Electrical Engineering
SPECIFICATIONS
• Function Generator:
• Duty cycle : 50%
• Frequency range : 1Hz – 100KHz
• TTL Output
• Sine, Square, Triangle Waveforms
• Frequency Variable Control
• Gain Variable Control
• VARIABLE SUPPLY DC
• 0 ~ +25V DC
• 0 ~ -25V DC
Page 4
University Of Science & Technology, Bannu
Department of Electrical Engineering
Function Generator:
Function generator can generate frequency upto 100KHz in 5 Steps. Connect
Oscilloscope probe to OUT pin and vary Frequency and Amplitude of the selected
waveform.
FIX Supply DC
Turn the power of the trainer ON
Verify the voltage mentioned on the trainer with voltmeter.
Voltmeter with respect to ground should read value: +5V, +12V and -12V
Page 5
University Of Science & Technology, Bannu
Department of Electrical Engineering
Variable Supply DC
Keep the voltmeter Range knob to 20V for following verification
Connect Digital Voltmeter + and - pins given on trainer to:
0 ~ +25V and 0V respectively and verify the voltage by varying Adjust knob
0 ~ -25V and 0V respectively and verify the voltage by varying Adjust knob
FIX Supply AC
Connect Oscilloscope at 2V and 0V to Verify AC Voltage
Connect Oscilloscope at 12V and 0V to Verify AC Voltage
Connect Oscilloscope at 15V and 0V to Verify AC Voltage
Page 6