Professional Documents
Culture Documents
Dashboard / My courses /
EHVAC /
General /
EHVAC Unit 4 practice/ Assignment quiz
Question 1
Correct
The disadvantage of using transformer tap changer for voltage control over firing angle control method in HVDC system is (C04)(BTL3)
a. High cost
Question 2
Correct
a. 0o
b. 2o
c. 10o
d. 5o
https://manojbmaurya.gnomio.com/mod/quiz/review.php?attempt=1075&cmid=187 1/4
6/11/2021 EHVAC Unit 4 practice/ Assignment quiz: Attempt review
Question 3
Correct
Question 4
Correct
Which of the following is not an essential requirement for HVDC converter control unit? (C04)(BTL3)
Question 5
Correct
a. 0.5 to 2 Hz
b. 5 to 20 Hz
c. 0 to 0.5 Hz
d. 0.5 to 5 Hz
https://manojbmaurya.gnomio.com/mod/quiz/review.php?attempt=1075&cmid=187 2/4
6/11/2021 EHVAC Unit 4 practice/ Assignment quiz: Attempt review
Question 6
Correct
With slight decrease in rectifier AC side voltage, the rectifier end converter works with ( CO4)(BTL3)
b. Minimum α control
Question 7
Correct
During power reversal mode of HVDC bipolar link, the converter operating point shifts from (CO4)(BTL2)
Question 8
Correct
For synchronous interconnection between HVDC and AC network, the worst type of control strategy is (C04)(BTL4)
https://manojbmaurya.gnomio.com/mod/quiz/review.php?attempt=1075&cmid=187 3/4
6/11/2021 EHVAC Unit 4 practice/ Assignment quiz: Attempt review
Question 9
Correct
The deviation in frequency with respect to time during power angle oscillations is also oscillatory for (CO4)(BTL3)
Question 10
Correct
The current references are interchanged among the rectifier and inverter end in HVDC system in order to (C04)(BTL4)
◄ Announcements
Jump to...
https://manojbmaurya.gnomio.com/mod/quiz/review.php?attempt=1075&cmid=187 4/4