Professional Documents
Culture Documents
testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Seat No -
Total number of questions : 60
1) All questions are Multiple Choice Questions having single correct option.
7) Use only black/blue ball point pen to darken the appropriate circle.
A : Finite duration
B : Infinite duration
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
A : Source
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 1/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C : Amplification
D : Output
A : Active
B : Passive
Q.no 5. Which of the following is done to convert a continuous time signal into discrete time
signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 6. Which of the following techniques are NOT used to convert analog filter to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
C : No unit
D : Hz
Q.no 8. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 2/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
B : -X(k)
C : X(k)
D : -X(-k)
A : Infinite sequences
Q.no 10. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
A : Only Encoder
B : Only decoder
Q.no 12. Which of the following method is not used to find the inverse z-transform of a signal?
A : Counter integration
Q.no 13. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively, then what is
the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 3/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 14. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 15. IIR Filter design methods are based on different mapping functions used for mapping
following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : Only Zeros
B : Only Poles
Q.no 17. An analog LTI system with system function H(s) is stable
Q.no 18. The circular convolution of two sequences in time domain is equivalent to
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 4/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C : Modulation
D : Quantization
B : Inner product 1
C : outer product 1
D : Magnitude 1
Q.no 23. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 5/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C : Causal signal
D : Linear
Q.no 24. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
Q.no 26. A linear time invariant system is said to be BIBO stable if and only if the ROC of the
system function
C : Is an unit circle
D : In Z plane
Q.no 27. If all the poles of H(z) are inside the unit circle, then the system is said to be
A : Only causal
C : BIBO causal
Q.no 28. In Overlap save method of long sequence filtering, how many zeros are appended to the
impulse response of the FIR filter if the siz of each small block of input sequence is L?
A : L+M
B:L
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 6/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C:L+1
D : L-1
Q.no 29. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 31. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
Q.no 32. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev filter lie on
a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
Q.no 33. If all the poles of H(z) are outside the unit circle, then the system is said to be
A : Only causal
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 7/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : BIBO Unstable
A : square
B : Triangular
D : cosine
Q.no 35. Physically realizable stable IIR filters cannot have a Linear Phase is True for which type
of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
Q.no 37. Which of the following is true in case of Overlap add method?
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 8/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 40. The large side lobes of W(ω) results in which of the following undesirable effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
A : Channel Noise
B : Contact Noise
D : Interference Noise
Q.no 42. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
A : Amplification control
B : volume control
C : Electron flow
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 9/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : Boost control
A : AC voltage
B : DC voltage
C : analog
D : digital
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
B : LPF
C : HPF
D : BPF
Q.no 47. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
C : To ensure that the bandwidth of the signal to be samples is limited to frequency range and to limit
the noise and other interference.
Q.no 48. Which of the following is True regarding stability of IIR filters?
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 10/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 49. Which one of the structures is NOT used for realisation of a digital IIR filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
Q.no 50. Consider the assertions given below. Which among them is an advantage of FIR Filter?
Q.no 51. Which of the following filter is characterised by ripple in both passband and stopband
A : Chebyshey Type 1
B : Elliptic
C : Butterworth
D : Chebyshey Type 2
Q.no 52. What is the circular convolution of the sequences x1(n)={2,1,2,1} and x2(n)={1,2,3,4}?
A : {14,14,16,16}
B : {16,16,14,14}
C : {2,3,6,4}
D : {14,16,14,16}
A : Source
B : Pre amplifier
C : Amplifier
D : Loudspeaker Enclosure
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 11/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 54. Impulse Invariant technique is appropraite for design of following filters
A : Highpass filters
Q.no 55. Analog Signal has frequency 5 KHz and sampling frequency is 20 KHz then aliasing
signal lfrequency is
A : 4 KHz
B : 25KHz
C : 30KHz
D : 20KHz
Q.no 56. Which of the following represents the salient features of a low pass butterworth filter:
(a) Magnitude response beyond Ωc is monotonically decreasing b) Magnitude response is never
constant at lower frequencies c) The maximum gain occurs at Ω = 0
A : Gap
B : Lands
C : Guards
D : Isolation
Q.no 58. With respect to finite word length, the zero-input limit cycle oscillations are attributed
to --------
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 12/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
A : Noise generator
B : Pulse generator
C : Signal generator
Q.no 1. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
C : No unit
D : Hz
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 13/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
A : Infinite sequences
Q.no 7. IIR Filter design methods are based on different mapping functions used for mapping
following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 14/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
B : Inner product 1
C : outer product 1
D : Magnitude 1
Q.no 10. Which of the following techniques are NOT used to convert analog filter to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 12. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
C : Modulation
D : Quantization
Q.no 14. In Overlap add method, what is the length of each input data block?
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 15/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
A : L-1
B:L
C : L+1
D : L+2
A : Active
B : Passive
A : Source
C : Amplification
D : Output
Q.no 18. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
A : Only Encoder
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 16/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
B : Only decoder
Q.no 20. Which of the following method is not used to find the inverse z-transform of a signal?
A : Counter integration
Q.no 22. Which of the following is done to convert a continuous time signal into discrete time
signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 23. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively, then what is
the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
A : Finite duration
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 17/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
B : Infinite duration
A : Only Zeros
B : Only Poles
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
Q.no 27. For a decimation-in-time FFT algorithm, which of the following is true?
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
Q.no 29. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 18/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-plane
Q.no 31. Which frequency is calculated in Vibration Analysis for Defective Gear Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
Q.no 32. With respect to finite word length, oscillations due to overflow are attributed to --------
A : LPF
B : HPF
D : DAC
A : Source
D : Speaker
Q.no 35. Mapping of points from the s-plane to the z-plane is implied by the relation
Q.no 36. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev filter lie on
a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
A : square
B : Triangular
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 20/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : cosine
Q.no 40. Consider the assertions given below. Which among them is an advantage of FIR Filter?
A : Channel Noise
B : Contact Noise
D : Interference Noise
Q.no 42. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
B : LPF
C : HPF
D : BPF
Q.no 44. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 21/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 46. If all the poles of H(z) are outside the unit circle, then the system is said to be
A : Only causal
D : BIBO Unstable
Q.no 47. In Overlap save method of long sequence filtering, how many zeros are appended to the
impulse response of the FIR filter if the siz of each small block of input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 22/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 50. Which of the following is true in case of Overlap add method?
Q.no 51. What is the DFT of the four point sequence x(n)={0,1,2,3}?
A : {6,-2+2j-2,-2-2j}
B : {6,-2-2j,2,-2+2j}
C : {6,-2+2j,-2,-2-2j}
D : {6,-2-2j,-2,-2+2j}
A : The discrete convolution between a sampled signal and a finite impulse response (FIR) filter
B : The discrete convolution between a sampled signal and an infinite impulse response (IIR) filter
C : The discrete convolution between a very long signal and a finite impulse response (FIR) filter
D : The discrete convolution between a very long signal and a infinite impulse response (IIR) filter
A : Channel converter
B : Modulator
C : Digital Recorder
D : Not used
Q.no 54. The Bilinear Transformation technique is a conformal mapping that transforms
A : The jΩ axis into the unit circle in the Z-plane only once, thus avoiding aliasing of frequency
components
B : The jΩ axis into the unit circle in the Z-plane more than once, thus causing aliasing of frequency
components
C : The jΩ axis into the unit circle in the Z-plane only once, thus causing aliasing of frequency
components
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 23/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : The jΩ axis into the unit circle in the Z-plane more than once, thus avoiding aliasing of frequency
components
Q.no 55. What is the peak side lobe (in dB) for a rectangular window?
A : -13
B : -27
C : -32
D : -58
Q.no 56. Which one of the structures of a digital IIR filter is used for high speed filtering
application?
A : Cascade Form
B : Direct Form 1
C : Direct Form 2
D : Parallel Form
Q.no 57. During design of IIR filters, direct 1-1 relationship between the frequency variables in
analog & frequency domain is ensured if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-plane
B : The jΩ axis in the s-plane maps into the unit circle in the Z-plane
C : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-plane
D : The jΩ axis in the s-plane maps outside the unit circle in the Z-plane
A : Source
C : Filter
D : Speaker
Q.no 59. If cut-off frequency of a digital filter is 0.2π & T = 1sec, then the equivalent analog cut-
off frequency Ωc using BLT is equal to
A : 0.2
B:1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 24/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C : 0.65
D : 0.32
Q.no 60. Analog ECG signal contains frequency up to 100 Hz. Suppose signal is sampled at the
rate of 350 samples per second. What is highest frequency present in the signal after sampling
A : 350 Hz
B : 250 Hz
C : 100Hz
D : 50Hz
A : infinite
B : 0.5
C:1
D : 1.5
Q.no 2. Which of the following is done to convert a continuous time signal into discrete time
signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 3. Which of the following techniques are NOT used to convert analog filter to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
A : Infinite sequences
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 25/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 5. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively, then what is the
N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 6. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
B : Inner product 1
C : outer product 1
D : Magnitude 1
A : Only Encoder
B : Only decoder
Q.no 9. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 26/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C : Feasible solution
D : Region of convergence
C : No unit
D : Hz
A : Finite duration
B : Infinite duration
C : Modulation
D : Quantization
Q.no 13. An analog LTI system with system function H(s) is stable
A : low frequency
B : high frequency
C : medium frequency
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 27/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : All frequency
Q.no 15. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
A : Source
C : Amplification
D : Output
Q.no 17. IIR Filter design methods are based on different mapping functions used for mapping
following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 28/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
A : Only Zeros
B : Only Poles
Q.no 21. The circular convolution of two sequences in time domain is equivalent to
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
A : Active
B : Passive
Q.no 24. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 29/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 25. Which of the following method is not used to find the inverse z-transform of a signal?
A : Counter integration
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
Q.no 27. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-plane
Q.no 28. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
C : To ensure that the bandwidth of the signal to be samples is limited to frequency range and to limit
the noise and other interference.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 30/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 30. Which frequency is calculated in Vibration Analysis for Defective Gear Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
Q.no 31. With respect to finite word length, oscillations due to overflow are attributed to --------
Q.no 32. A linear time invariant system is said to be BIBO stable if and only if the ROC of the
system function
C : Is an unit circle
D : In Z plane
Q.no 33. The large side lobes of W(ω) results in which of the following undesirable effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
Q.no 34. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 31/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 35. If all the poles of H(z) are inside the unit circle, then the system is said to be
A : Only causal
C : BIBO causal
Q.no 36. For a decimation-in-time FFT algorithm, which of the following is true?
A : AC voltage
B : DC voltage
C : analog
D : digital
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
Q.no 39. Which of the following is True regarding stability of IIR filters?
Q.no 40. Which one of the structures is NOT used for realisation of a digital IIR filter?
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 32/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
B : Lattice Form
C : Cascade Form
D : Parallel Form
Q.no 41. Physically realizable stable IIR filters cannot have a Linear Phase is True for which type
of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 44. Mapping of points from the s-plane to the z-plane is implied by the relation
Q.no 45. The digital filter used to remove the stationary power line interference
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 33/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : Elliptic Filter
A : square
B : Triangular
D : cosine
Q.no 47. Which of the following is true in case of Overlap add method?
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 49. In Overlap save method of long sequence filtering, how many zeros are appended to the
impulse response of the FIR filter if the siz of each small block of input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 34/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 51. Which of the following filter is characterised by ripple in both passband and stopband
A : Chebyshey Type 1
B : Elliptic
C : Butterworth
D : Chebyshey Type 2
A : Source
B : Pre amplifier
C : Amplifier
D : Loudspeaker Enclosure
A : Noise generator
B : Pulse generator
C : Signal generator
A : P wave
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 35/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C : T wave
A : Gap
B : Lands
C : Guards
D : Isolation
Q.no 57. Which of the following represents the salient features of a low pass butterworth filter:
(a) Magnitude response beyond Ωc is monotonically decreasing b) Magnitude response is never
constant at lower frequencies c) The maximum gain occurs at Ω = 0
Q.no 58. The 4-point discrete Fourier Transform (DFT) of a discrete time sequence {1, 0, 2, 3} is
Q.no 59. What is the peak side lobe (in dB) for a Hanning window?
A : -13
B : -27
C : -32
D : -58
A : LPF
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 36/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
B : HPF
C : BPF
D : APF
A : Finite duration
B : Infinite duration
Q.no 2. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 3. Which of the following is done to convert a continuous time signal into discrete time
signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 4. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
A : All signals
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 37/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
B : Anti-causal signal
C : Causal signal
D : Linear
A : Only Encoder
B : Only decoder
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
A : Only Zeros
B : Only Poles
A : Source
C : Amplification
D : Output
Q.no 10. An analog LTI system with system function H(s) is stable
Q.no 11. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively, then what is
the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 12. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 13. Which of the following method is not used to find the inverse z-transform of a signal?
A : Counter integration
Q.no 15. The circular convolution of two sequences in time domain is equivalent to
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 39/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 16. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
Q.no 17. IIR Filter design methods are based on different mapping functions used for mapping
following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : Active
B : Passive
Q.no 19. Which of the following techniques are NOT used to convert analog filter to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
A : low frequency
B : high frequency
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 40/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C : medium frequency
D : All frequency
C : No unit
D : Hz
C : Modulation
D : Quantization
A : Infinite sequences
B : Inner product 1
C : outer product 1
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 41/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : Magnitude 1
A : LPF
B : HPF
D : DAC
A : Source
D : Speaker
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 30. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
C : To ensure that the bandwidth of the signal to be samples is limited to frequency range and to limit
the noise and other interference.
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 42/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 31. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev filter lie on
a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
Q.no 33. Which frequency is calculated in Vibration Analysis for Defective Gear Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
A : Channel Noise
B : Contact Noise
D : Interference Noise
Q.no 35. If all the poles of H(z) are outside the unit circle, then the system is said to be
A : Only causal
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 43/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : BIBO Unstable
Q.no 36. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-plane
Q.no 37. Consider the assertions given below. Which among them is an advantage of FIR Filter?
B : LPF
C : HPF
D : BPF
Q.no 39. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 44/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 41. Which of the following is true in case of Overlap add method?
A : square
B : Triangular
D : cosine
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
Q.no 44. The large side lobes of W(ω) results in which of the following undesirable effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
Q.no 45. A linear time invariant system is said to be BIBO stable if and only if the ROC of the
system function
C : Is an unit circle
D : In Z plane
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 45/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 46. Which one of the structures is NOT used for realisation of a digital IIR filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
Q.no 47. Physically realizable stable IIR filters cannot have a Linear Phase is True for which type
of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
Q.no 48. Which of the following is True regarding stability of IIR filters?
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 50. If all the poles of H(z) are inside the unit circle, then the system is said to be
A : Only causal
C : BIBO causal
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 46/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 51. Analog Signal has frequency 5 KHz and sampling frequency is 20 KHz then aliasing
signal lfrequency is
A : 4 KHz
B : 25KHz
C : 30KHz
D : 20KHz
Q.no 52. How does the frequency of oscillations in the pass band of a low pass filter varies with
the value of M?
Q.no 53. Analog ECG signal contains frequency up to 100 Hz. Suppose signal is sampled at the
rate of 350 samples per second. What is highest frequency present in the signal after sampling
A : 350 Hz
B : 250 Hz
C : 100Hz
D : 50Hz
Q.no 54. What is the lowest order of the Butterworth filter with a pass band gain KP=-1 dB at
Ωp=4 rad/sec and stop band attenuation greater than or equal to 20dB at Ωs = 8 rad/sec?
A:4
B:5
C:6
D:3
Q.no 55. What is the circular convolution of the sequences x1(n)={2,1,2,1} and x2(n)={1,2,3,4}?
A : {14,14,16,16}
B : {16,16,14,14}
C : {2,3,6,4}
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 47/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : {14,16,14,16}
A : The discrete convolution between a sampled signal and a finite impulse response (FIR) filter
B : The discrete convolution between a sampled signal and an infinite impulse response (IIR) filter
C : The discrete convolution between a very long signal and a finite impulse response (FIR) filter
D : The discrete convolution between a very long signal and a infinite impulse response (IIR) filter
Q.no 57. During design of IIR filters, direct 1-1 relationship between the frequency variables in
analog & frequency domain is ensured if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-plane
B : The jΩ axis in the s-plane maps into the unit circle in the Z-plane
C : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-plane
D : The jΩ axis in the s-plane maps outside the unit circle in the Z-plane
Q.no 58. What is the DFT of the four point sequence x(n)={0,1,2,3}?
A : {6,-2+2j-2,-2-2j}
B : {6,-2-2j,2,-2+2j}
C : {6,-2+2j,-2,-2-2j}
D : {6,-2-2j,-2,-2+2j}
Q.no 59. If cut-off frequency of a digital filter is 0.2π & T = 1sec, then the equivalent analog cut-
off frequency Ωc using BLT is equal to
A : 0.2
B:1
C : 0.65
D : 0.32
C : speech signal
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 48/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
A : Infinite sequences
A : Active
B : Passive
Q.no 4. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
A : Only Zeros
B : Only Poles
Q.no 6. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 8. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively, then what is the
N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
C : No unit
D : Hz
Q.no 10. IIR Filter design methods are based on different mapping functions used for mapping
following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 50/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 11. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
A : Only Encoder
B : Only decoder
Q.no 13. Which of the following is done to convert a continuous time signal into discrete time
signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 14. Which of the following method is not used to find the inverse z-transform of a signal?
A : Counter integration
A : Source
C : Amplification
D : Output
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 51/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
A : Finite duration
B : Infinite duration
C : Modulation
D : Quantization
Q.no 19. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
B : Inner product 1
C : outer product 1
D : Magnitude 1
Q.no 21. The circular convolution of two sequences in time domain is equivalent to
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 52/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
Q.no 22. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 25. Which of the following techniques are NOT used to convert analog filter to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 26. With respect to finite word length, oscillations due to overflow are attributed to --------
Q.no 27. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
A : AC voltage
B : DC voltage
C : analog
D : digital
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 54/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
Q.no 32. For a decimation-in-time FFT algorithm, which of the following is true?
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
A : Source
D : Speaker
A : LPF
B : HPF
D : DAC
Q.no 37. In Overlap save method of long sequence filtering, how many zeros are appended to the
impulse response of the FIR filter if the siz of each small block of input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 38. Mapping of points from the s-plane to the z-plane is implied by the relation
Q.no 39. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
Q.no 40. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
C : To ensure that the bandwidth of the signal to be samples is limited to frequency range and to limit
the noise and other interference.
A : square
B : Triangular
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 56/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
D : cosine
Q.no 42. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
A : Channel Noise
B : Contact Noise
D : Interference Noise
Q.no 44. If all the poles of H(z) are inside the unit circle, then the system is said to be
A : Only causal
C : BIBO causal
Q.no 45. Which one of the structures is NOT used for realisation of a digital IIR filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
Q.no 46. Which of the following is true in case of Overlap add method?
Q.no 47. Physically realizable stable IIR filters cannot have a Linear Phase is True for which type
of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
Q.no 48. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-plane
Q.no 49. Which frequency is calculated in Vibration Analysis for Defective Gear Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
Q.no 50. Which of the following is True regarding stability of IIR filters?
Q.no 51. Which one of the structures of a digital IIR filter is used for high speed filtering
application?
A : Cascade Form
B : Direct Form 1
C : Direct Form 2
D : Parallel Form
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 58/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
A : Source
B : Pre amplifier
C : Amplifier
D : Loudspeaker Enclosure
A : Contact noise
B : Channel noise
C : Interference
D : Intermodulation distortion
Q.no 55. Which of the following represents the salient features of a low pass butterworth filter:
(a) Magnitude response beyond Ωc is monotonically decreasing b) Magnitude response is never
constant at lower frequencies c) The maximum gain occurs at Ω = 0
Q.no 56. What is the peak side lobe (in dB) for a rectangular window?
A : -13
B : -27
C : -32
D : -58
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 59/60
12/27/2020 https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5
A : Noise generator
B : Pulse generator
C : Signal generator
Q.no 58. Impulse Invariant technique is appropraite for design of following filters
A : Highpass filters
A : Channel converter
B : Modulator
C : Digital Recorder
D : Not used
https://sppu.wheebox.com/WAC-3/allqusdownloadhtml.ils?testNo=680&code=1052000&showTest=320&actForm=edit&set=5 60/60
Seat No -
Total number of questions : 60
1) All questions are Multiple Choice Questions having single correct option.
7) Use only black/blue ball point pen to darken the appropriate circle.
A : Laplace transform
B : Fourier transform
C : Z-transform
D : Integral
A : No Uncertainty
B : Uncertainty
C : Partial Uncertainty
D : Perfect Uncertainty
Q.no 3.
A:4
B:3
C:2
D:1
A : Fourier transform
C : Z transform
D : Laplace transform
C : 1 & 3 correct
Q.no 7. In mapping of S-plane to Z-plane, poles on the left half of S-plane maps------
in Z-plane
D : At infinity
A : an Even signal
B : an Odd signal
D : Both A and C
Q.no 9. A system which has non-unique relation between its input and output is?
A : Linear System
B : Causal System
C : Time-invariant system
D : Non-invertible System
Q.no 10. If X1(k) and X2(k) are the N-point DFTs of x1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : exp(akX1(k))+exp(bkX2(k))
Q.no 11.
A:
B:
C:
D:
Q.no 12.
A:
B:
C : Less than 0
D : Always equal to 0
D : is not possible
Q.no 14.
A:
B:
C:
D:
A : Finite length
B : Infinite length
C : Aperiodic Sequence
D : Continuous Sequence
A : Static System
B : Causal System
C : Non-causal system
D : Unstable System
A : Signal itself
B : Impulse
C : A new signal
Q.no 19. The Energy Density spectrum is the distribution of energy in the signal as
A : a function of Frequency
B : a function of time
D : both a and b
Q.no 20.
A:
B:
C:
D:
A : Physically realizable
B : Physically unrealizable
D : Both B and C
Q.no 22. A signal which is function of only one independent variable is called
A : Multichannel signal
B : Multidimensional Signal
C : One-dimensional signal
D : One-channel signal
A : 0 to ∏
B : 0 to 2∏
C : 0 to ∏/2
D : 0 to 4∏/3
Q.no 24. In circular convolutions of 2 sequences x(n) & h(n) having lengths L & M
respectively, where M<L, then adding No of zeros to sequence h(n) is called as
_____
A : Zero Padding
B : Overlapping
C : Filtering
D : None of these
A:
B:
C:
D:
Q.no 26. Original information can be recovered completely from its sampled
version if the sampling frequency is?
A:
B:
C:
D:
D : both a and b
Q.no 28.
D : Undefined
Q.no 29. The difference between DIT & DIF algorithm is that______
A : In DIT is i/p is bit reversal & o/p is in natural order, whereas in DIF i/p is natural &
o/p is bit reversal
B : In DIT, i/p is natural & o/p is bit reversal, whereas in DIF i/p is bit reversal & o/p is
natural
C : In DIT i/p is natural & o/p is also natural whereas in DIF i/p is bit reversal & o/p is
also bit reversal
D : In DIT i/p is bit reversal & o/p is also bit reversal, whereas in DIF i/p is natural & o/p
is also natural
A : Linear Filtering
B : Correlation
C : Spectrum analyasis
D : All of above
A : z=1
B : z=0
C : z=Infinity
D : Entire z-plane
Q.no 32. In a circular convolution, if x(n) contains L no of samples and h(n) has M
no of samples, then the circular convolution will have the length of N = _________
A : N = min (L,M)
B : N = Max (L, M)
C:N=L+M-1
D:N=L+M+1
Q.no 33. What are the different ways to represents the Discrete-Time signals
A : Graphical Representation
B : Functional Representation
C : Tabular Representation
A : Advancing
B : Delaying
C : Time reversal
Q.no 36.
A : Nonlinear system
B : Non-causal system
C : Causal system
D : Continuous Time System
Q.no 37. If difference equation of FIR filter is y(n)=x(n) + 0.5 x(n-1) - 0.2 x(n-2) +0.3
x(n-3) - 0.2 x(n-4) + 0.5 x(n-5) +x(n-6), to implement this liner phase FIR system,
number of delay elements required are
A:6
B:5
C:4
D:3
Q.no 38.
A:
B:
C:
D:
Q.no 39. If X(k) is the N-point DFT of a sequence x(n), then what is the DFT of x*
(n)?
A : X(N-k)
B : X*(k)
C : X*(N-k)
Q.no 40. The region of convergence of a causal finite duration discrete-time signal
is
Q.no 42.
A : Causal Signal
B : Odd Signal
C : Even Signal
D : Parabolic Signal
Q.no 43.
B : Exponential Sequence
Q.no 44. Where does the maximum value of auto-correlation function of a power
signal occur
A : At origin
B : At extremities
C : At unity
D : At infinity
Q.no 45.
A:
B:
C:
D:
A:
B:
C:
D:
Q.no 47. The Linear Convolution of 2 sequences x(n) of L no of Samples and h(n)
of M no of samples produces result y(n) which contains N samples of length
_______
A : N = L + M -1
B:N=L-M+1
C:N=L+M+1
D:N=L-M-1
Q.no 48.
A:
B:
C:
D:
Q.no 49. The circular convolution of 2 sequences in the time domain is equivalent
to
A : {3,-j,1,j}
B : {1,1,1,1}
C : {1,2,3,4}
D : {0,1,1,1}
B : {4,5,6,6}
C : {6,6,5,4}
D : {6,5,4,6}
Q.no 52. H(z) is discrete rational transfer function. To ensure that both H(z) and
its inverse are stable
A : Poles must be inside the unit circle and zeros must be outside the unit circle
D : Poles must be outside the unit circle and zeros must be inside the unit circle
Q.no 53. If x1(n)={1,2,3,4} and x2{1,1,2,2} such that X3(K)=X1(K)X2(K) then x3(n)=
A : {15,17,15,13}
B : {13,15,17,15}
C : {15,15,13,14}
D : {13,17,15,15}
A : Convolution integral
B : Convolution multiple
C : Convolution sum
D : Convolution
Q.no 55.
A : 1.5
B:0
C:
D:2
Q.no 56.
A:
B:
C:
D:
Q.no 59. Which oscillations will be generated in the time domain response, if
complex conjugate poles are present with negative real part?
A : Damped oscillations
B : Undamped oscillations
C : Sustained oscillations
D : Can't Say
Q.no 60.
A:5
B : 1/0.8
C : 0.2
D:
Q.no 1. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : X(n)
A : true
B : false
C : may be
D : may not
Q.no 3. If the IIR system has M number of polse and N number of zeros, then it
requires ------ number of delay elements to implement it using Direct Form-II.
A:M
B:N
C : M+N
D : Max(M,N)
Q.no 4.
A:
B:
C:
D:
Q.no 5. By defination, the DFT computes N equally spaced samples of the -----
A : DTFT
B : Laplace transform
C : Z transform
Q.no 6.
A:
B:
C:
D:
A : Physically realizable
B : Physically unrealizable
D : Both B and C
A : 0 to ∏
B : 0 to 2∏
C : 0 to ∏/2
D : 0 to 4∏/3
C : 1 & 3 correct
Q.no 11.
A:
B:
C : Less than 0
D : Always equal to 0
Q.no 12. The Energy Density spectrum is the distribution of energy in the signal as
A : a function of Frequency
B : a function of time
D : both a and b
A : Finite length
B : Infinite length
C : Aperiodic Sequence
D : Continuous Sequence
A : Fourier transform
C : Z transform
D : Laplace transform
A : Static System
B : Causal System
C : Non-causal system
D : Unstable System
A : an Even signal
B : an Odd signal
D : Both A and C
Q.no 18.
A:4
B:3
C:2
D:1
Q.no 19.
A:
B:
C:
D:
Q.no 20. In circular convolutions of 2 sequences x(n) & h(n) having lengths L & M
respectively, where M<L, then adding No of zeros to sequence h(n) is called as
_____
A : Zero Padding
B : Overlapping
C : Filtering
D : None of these
Q.no 21. In mapping of S-plane to Z-plane, poles on the left half of S-plane maps-----
- in Z-plane
D : At infinity
Q.no 22. A signal which is function of only one independent variable is called
A : Multichannel signal
B : Multidimensional Signal
C : One-dimensional signal
D : One-channel signal
Q.no 23. If X1(k) and X2(k) are the N-point DFTs of x1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : exp(akX1(k))+exp(bkX2(k))
Q.no 24. A system which has non-unique relation between its input and output is?
A : Linear System
B : Causal System
C : Time-invariant system
D : Non-invertible System
A:
B:
C:
D:
Q.no 27. If X(K) is N -point DFT of a finite duration sequence x(n) then
X(x+N)=x(n) for all n,this property is called as
A : Periodicity
B : Linearity
Q.no 28.
A:0
B:
C:
D:
D : Cannot be determined
Q.no 30. If two finite duration sequences x1(n) and x2(n) are linearly combined as
x3(n)=ax1(n)+bx2(n) then DFT of x3(n) is X3(K)=aX1(K)+bX2(K) this property is
called as
A : Periodicity
B : Linearity
Q.no 31.
A : Adder
B : Accumulator
C : Subtractor
D : Multiplier
Q.no 32.
A:
B:
C:
D:
Q.no 33.
D : Undefined
Q.no 34.
A:
B:
C:
D:
A:
B:
C:
D:
Q.no 37.
B : Exponential Sequence
Q.no 38.
A : Nonlinear system
B : Non-causal system
C : Causal system
Q.no 39.
A:
B:
C:
D:
Q.no 41. If difference equation of FIR filter is y(n)=x(n) + 0.5 x(n-1) - 0.2 x(n-2) +0.3
x(n-3) - 0.2 x(n-4) + 0.5 x(n-5) +x(n-6), to implement this liner phase FIR system,
number of delay elements required are
A:6
B:5
C:4
D:3
D : both a and b
A : z=1
B : z=0
C : z=Infinity
D : Entire z-plane
Q.no 44. Time shifting operation is corresponding to
A : Advancing
B : Delaying
C : Time reversal
Q.no 45. The Linear Convolution of 2 sequences x(n) of L no of Samples and h(n)
of M no of samples produces result y(n) which contains N samples of length
_______
A : N = L + M -1
B:N=L-M+1
C:N=L+M+1
D:N=L-M-1
A : Linear Filtering
B : Correlation
C : Spectrum analyasis
D : All of above
Q.no 47.
A : Causal Signal
B : Odd Signal
C : Even Signal
D : Parabolic Signal
Q.no 48. The circular convolution of 2 sequences in the time domain is equivalent
to
Q.no 49. In a circular convolution, if x(n) contains L no of samples and h(n) has M
no of samples, then the circular convolution will have the length of N = _________
A : N = min (L,M)
B : N = Max (L, M)
C:N=L+M-1
D:N=L+M+1
Q.no 50. Original information can be recovered completely from its sampled
version if the sampling frequency is?
A:
B:
C:
D:
Q.no 51. Convolution of two sequences X1[n] and X2[n] are represented by
A : X1(z)*X2(z)
B : X1(z)X2(z)
C : X1(z)+X2(z)
D : X1(z)/X2(z)
A:
B:
C:
D:
Q.no 53. What are the tools used in a graphical method of finding convolution of
discrete time signals
A : Convolution integral
B : Convolution multiple
C : Convolution sum
D : Convolution
Q.no 56.
A:5
B : 1/0.8
C : 0.2
D:
Q.no 57.
A : 1.5
B:0
C:
D:2
B:
C:
D:
Q.no 59. If x1(n)={1,2,3,4} and x2{1,1,2,2} such that X3(K)=X1(K)X2(K) then x3(n)=
A : {15,17,15,13}
B : {13,15,17,15}
C : {15,15,13,14}
D : {13,17,15,15}
A : {5,4,6,6}
B : {4,5,6,6}
C : {6,6,5,4}
D : {6,5,4,6}
A : No Uncertainty
B : Uncertainty
C : Partial Uncertainty
D : Perfect Uncertainty
Q.no 2. By defination, the DFT computes N equally spaced samples of the -----
A : DTFT
B : Laplace transform
C : Z transform
Q.no 3.
A:
B:
C:
D:
Q.no 4. If the IIR system has M number of polse and N number of zeros, then it
requires ------ number of delay elements to implement it using Direct Form-II.
A:M
B:N
C : M+N
D : Max(M,N)
A : true
B : false
C : may be
D : may not
D : is not possible
Q.no 7.
A:
B:
C:
D:
Q.no 8. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : X(n)
Q.no 9.
A:
B:
C:
D:
Q.no 10. Difference equation technique for higher order systems is used in
A : Laplace transform
B : Fourier transform
C : Z-transform
D : Integral
A : Signal itself
B : Impulse
C : A new signal
A : 0 to ∏
B : 0 to 2∏
C : 0 to ∏/2
D : 0 to 4∏/3
Q.no 13. In circular convolutions of 2 sequences x(n) & h(n) having lengths L & M
respectively, where M<L, then adding No of zeros to sequence h(n) is called as
_____
A : Zero Padding
B : Overlapping
C : Filtering
D : None of these
Q.no 14. FFT may be used to calculate 1) DFT 2) IDFT 3) Direct Z Transform 4)
Indirect Z Transform
C : 1 & 3 correct
A : Static System
B : Causal System
C : Non-causal system
D : Unstable System
Q.no 16.
A:
B:
C:
D:
Q.no 17. If X1(k) and X2(k) are the N-point DFTs of x1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : exp(akX1(k))+exp(bkX2(k))
Q.no 18. A signal which is function of only one independent variable is called
A : Multichannel signal
B : Multidimensional Signal
C : One-dimensional signal
D : One-channel signal
Q.no 19.
A:4
B:3
C:2
D:1
A : an Even signal
B : an Odd signal
D : Both A and C
A : Fourier transform
C : Z transform
D : Laplace transform
Q.no 22. In mapping of S-plane to Z-plane, poles on the left half of S-plane maps-----
- in Z-plane
D : At infinity
Q.no 23.
A:
B:
C:
D:
Q.no 24. A system which has non-unique relation between its input and output is?
A : Linear System
B : Causal System
C : Time-invariant system
D : Non-invertible System
A : Physically realizable
B : Physically unrealizable
D : Both B and C
A : {3,-j,1,j}
B : {1,1,1,1}
C : {1,2,3,4}
D : {0,1,1,1}
Q.no 27. How can we solve discrete time convolution problems?
Q.no 28. The region of convergence of a causal finite duration discrete-time signal
is
Q.no 29. If X(K) is N -point DFT of a finite duration sequence x(n) then
X(x+N)=x(n) for all n,this property is called as
A : Periodicity
B : Linearity
Q.no 30. If X(k) is the N-point DFT of a sequence x(n), then what is the DFT of x*
(n)?
A : X(N-k)
B : X*(k)
C : X*(N-k)
Q.no 31.
A:0
B:
C:
D:
D : Cannot be determined
Q.no 33. What are the different ways to represents the Discrete-Time signals
A : Graphical Representation
B : Functional Representation
C : Tabular Representation
Q.no 34. The difference between DIT & DIF algorithm is that______
A : In DIT is i/p is bit reversal & o/p is in natural order, whereas in DIF i/p is natural &
o/p is bit reversal
B : In DIT, i/p is natural & o/p is bit reversal, whereas in DIF i/p is bit reversal & o/p is
natural
C : In DIT i/p is natural & o/p is also natural whereas in DIF i/p is bit reversal & o/p is
also bit reversal
D : In DIT i/p is bit reversal & o/p is also bit reversal, whereas in DIF i/p is natural & o/p
is also natural
Q.no 35. If two finite duration sequences x1(n) and x2(n) are linearly combined as
x3(n)=ax1(n)+bx2(n) then DFT of x3(n) is X3(K)=aX1(K)+bX2(K) this property is
called as
A : Periodicity
B : Linearity
A : At origin
B : At extremities
C : At unity
D : At infinity
Q.no 37.
A : Adder
B : Accumulator
C : Subtractor
D : Multiplier
Q.no 38. Original information can be recovered completely from its sampled
version if the sampling frequency is?
A:
B:
C:
D:
Q.no 39.
A:
B:
C:
D:
Q.no 40. The Linear Convolution of 2 sequences x(n) of L no of Samples and h(n)
of M no of samples produces result y(n) which contains N samples of length
_______
A : N = L + M -1
B:N=L-M+1
C:N=L+M+1
D:N=L-M-1
A : Linear Filtering
B : Correlation
C : Spectrum analyasis
D : All of above
Q.no 42.
B : Exponential Sequence
Q.no 43. In a circular convolution, if x(n) contains L no of samples and h(n) has M
no of samples, then the circular convolution will have the length of N = _________
A : N = min (L,M)
B : N = Max (L, M)
C:N=L+M-1
D:N=L+M+1
Q.no 44. The circular convolution of 2 sequences in the time domain is equivalent
to
Q.no 45.
A:
B:
C:
D:
Q.no 46.
D : Undefined
A : Advancing
B : Delaying
C : Time reversal
A : z=1
B : z=0
C : z=Infinity
D : Entire z-plane
Q.no 50.
A : Nonlinear system
B : Non-causal system
C : Causal system
Q.no 51. Convolution of two sequences X1[n] and X2[n] are represented by
A : X1(z)*X2(z)
B : X1(z)X2(z)
C : X1(z)+X2(z)
D : X1(z)/X2(z)
Q.no 52.
Q.no 53. Which oscillations will be generated in the time domain response, if
complex conjugate poles are present with negative real part?
A : Damped oscillations
B : Undamped oscillations
C : Sustained oscillations
D : Can't Say
Q.no 54. H(z) is discrete rational transfer function. To ensure that both H(z) and
its inverse are stable
A : Poles must be inside the unit circle and zeros must be outside the unit circle
D : Poles must be outside the unit circle and zeros must be inside the unit circle
Q.no 55. If x1(n)={1,2,3,4} and x2{1,1,2,2} such that X3(K)=X1(K)X2(K) then x3(n)=
A : {15,17,15,13}
B : {13,15,17,15}
C : {15,15,13,14}
D : {13,17,15,15}
Q.no 56. What are the tools used in a graphical method of finding convolution of
discrete time signals
A:
B:
C:
D:
Q.no 59.
A:5
B : 1/0.8
C : 0.2
D:
Q.no 60. Weighted superposition of time-shifted impulse responses is termed as
_______ for discrete-time signals.
A : Convolution integral
B : Convolution multiple
C : Convolution sum
D : Convolution
Q.no 1. The Energy Density spectrum is the distribution of energy in the signal as
A : a function of Frequency
B : a function of time
D : both a and b
A : true
B : false
C : may be
D : may not
Q.no 3.
A:
B:
C : Less than 0
D : Always equal to 0
A : No Uncertainty
B : Uncertainty
C : Partial Uncertainty
D : Perfect Uncertainty
D : is not possible
Q.no 7. By defination, the DFT computes N equally spaced samples of the -----
A : DTFT
B : Laplace transform
C : Z transform
Q.no 8. If the IIR system has M number of polse and N number of zeros, then it
requires ------ number of delay elements to implement it using Direct Form-II.
A:M
B:N
C : M+N
D : Max(M,N)
Q.no 9.
A:
B:
C:
D:
A : Finite length
B : Infinite length
C : Aperiodic Sequence
D : Continuous Sequence
A:
B:
C:
D:
Q.no 13. FFT may be used to calculate 1) DFT 2) IDFT 3) Direct Z Transform 4)
Indirect Z Transform
C : 1 & 3 correct
Q.no 14. If X1(k) and X2(k) are the N-point DFTs of x1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : exp(akX1(k))+exp(bkX2(k))
Q.no 15.
A:
B:
C:
D:
A : Fourier transform
C : Z transform
D : Laplace transform
Q.no 17. A signal which is function of only one independent variable is called
A : Multichannel signal
B : Multidimensional Signal
C : One-dimensional signal
D : One-channel signal
Q.no 18.
A:
B:
C:
D:
A : an Even signal
B : an Odd signal
D : Both A and C
Q.no 20. In circular convolutions of 2 sequences x(n) & h(n) having lengths L & M
respectively, where M<L, then adding No of zeros to sequence h(n) is called as
_____
A : Zero Padding
B : Overlapping
C : Filtering
D : None of these
A : Static System
B : Causal System
C : Non-causal system
D : Unstable System
A : Physically realizable
B : Physically unrealizable
D : Both B and C
Q.no 23.
A:4
B:3
C:2
D:1
Q.no 24.
A:
B:
C:
D:
A : 0 to ∏
B : 0 to 2∏
C : 0 to ∏/2
D : 0 to 4∏/3
Q.no 26.
A:0
B:
C:
D:
Q.no 27. If X(k) is the N-point DFT of a sequence x(n), then what is the DFT of x*
(n)?
A : X(N-k)
B : X*(k)
C : X*(N-k)
A : {3,-j,1,j}
B : {1,1,1,1}
C : {1,2,3,4}
D : {0,1,1,1}
Q.no 30.
A : Causal Signal
B : Odd Signal
C : Even Signal
D : Parabolic Signal
Q.no 31.
A:
B:
C:
D:
A:
B:
C:
D:
Q.no 33. If X(K) is N -point DFT of a finite duration sequence x(n) then
X(x+N)=x(n) for all n,this property is called as
A : Periodicity
B : Linearity
Q.no 36. If difference equation of FIR filter is y(n)=x(n) + 0.5 x(n-1) - 0.2 x(n-2) +0.3
x(n-3) - 0.2 x(n-4) + 0.5 x(n-5) +x(n-6), to implement this liner phase FIR system,
number of delay elements required are
A:6
B:5
C:4
D:3
D : both a and b
Q.no 38. The Linear Convolution of 2 sequences x(n) of L no of Samples and h(n)
of M no of samples produces result y(n) which contains N samples of length
_______
A : N = L + M -1
B:N=L-M+1
C:N=L+M+1
D:N=L-M-1
Q.no 39. In a circular convolution, if x(n) contains L no of samples and h(n) has M
no of samples, then the circular convolution will have the length of N = _________
A : N = min (L,M)
B : N = Max (L, M)
C:N=L+M-1
D:N=L+M+1
Q.no 40.
A : Nonlinear system
B : Non-causal system
C : Causal system
Q.no 41.
B : Exponential Sequence
Q.no 42. Where does the maximum value of auto-correlation function of a power
signal occur
A : At origin
B : At extremities
C : At unity
D : At infinity
Q.no 43. What are the different ways to represents the Discrete-Time signals
A : Graphical Representation
B : Functional Representation
C : Tabular Representation
Q.no 44.
A : Adder
B : Accumulator
C : Subtractor
D : Multiplier
Q.no 45.
A:
B:
C:
D:
A : Linear Filtering
B : Correlation
C : Spectrum analyasis
D : All of above
Q.no 47. The circular convolution of 2 sequences in the time domain is equivalent
to
Q.no 48. The difference between DIT & DIF algorithm is that______
A : In DIT is i/p is bit reversal & o/p is in natural order, whereas in DIF i/p is natural &
o/p is bit reversal
B : In DIT, i/p is natural & o/p is bit reversal, whereas in DIF i/p is bit reversal & o/p is
natural
C : In DIT i/p is natural & o/p is also natural whereas in DIF i/p is bit reversal & o/p is
also bit reversal
D : In DIT i/p is bit reversal & o/p is also bit reversal, whereas in DIF i/p is natural & o/p
is also natural
A : z=1
B : z=0
C : z=Infinity
D : Entire z-plane
D : Cannot be determined
Q.no 51.
A : 1.5
B:0
C:
D:2
Q.no 52. Which oscillations will be generated in the time domain response, if
complex conjugate poles are present with negative real part?
A : Damped oscillations
B : Undamped oscillations
C : Sustained oscillations
D : Can't Say
Q.no 53. Convolution of two sequences X1[n] and X2[n] are represented by
A : X1(z)*X2(z)
B : X1(z)X2(z)
C : X1(z)+X2(z)
D : X1(z)/X2(z)
Q.no 54.
A:
B:
C:
D:
A : {5,4,6,6}
B : {4,5,6,6}
C : {6,6,5,4}
D : {6,5,4,6}
A : Convolution integral
B : Convolution multiple
C : Convolution sum
D : Convolution
Q.no 59.
A:5
B : 1/0.8
C : 0.2
D:
Q.no 60. If x1(n)={1,2,3,4} and x2{1,1,2,2} such that X3(K)=X1(K)X2(K) then x3(n)=
A : {15,17,15,13}
B : {13,15,17,15}
C : {15,15,13,14}
D : {13,17,15,15}
Q.no 1. The Energy Density spectrum is the distribution of energy in the signal as
A : a function of Frequency
B : a function of time
D : both a and b
A : true
B : false
C : may be
D : may not
Q.no 3. By defination, the DFT computes N equally spaced samples of the -----
A : DTFT
B : Laplace transform
C : Z transform
Q.no 4. If the IIR system has M number of polse and N number of zeros, then it
requires ------ number of delay elements to implement it using Direct Form-II.
A:M
B:N
C : M+N
D : Max(M,N)
A : Signal itself
B : Impulse
C : A new signal
A : No Uncertainty
B : Uncertainty
C : Partial Uncertainty
D : Perfect Uncertainty
Q.no 8. A system which has non-unique relation between its input and output is?
A : Linear System
B : Causal System
C : Time-invariant system
D : Non-invertible System
Q.no 9. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : X(n)
Q.no 10. Difference equation technique for higher order systems is used in
A : Laplace transform
B : Fourier transform
C : Z-transform
D : Integral
Q.no 11.
A:
B:
C : Less than 0
D : Always equal to 0
D : is not possible
Q.no 13. In mapping of S-plane to Z-plane, poles on the left half of S-plane maps-----
- in Z-plane
D : At infinity
Q.no 14.
A:
B:
C:
D:
Q.no 15.
A:
B:
C:
D:
Q.no 16.
A:
B:
C:
D:
A : 0 to ∏
B : 0 to 2∏
C : 0 to ∏/2
D : 0 to 4∏/3
A:
B:
C:
D:
Q.no 20. If X1(k) and X2(k) are the N-point DFTs of x1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : exp(akX1(k))+exp(bkX2(k))
A : Physically realizable
B : Physically unrealizable
D : Both B and C
Q.no 22. In circular convolutions of 2 sequences x(n) & h(n) having lengths L & M
respectively, where M<L, then adding No of zeros to sequence h(n) is called as
_____
A : Zero Padding
B : Overlapping
C : Filtering
D : None of these
Q.no 23. FFT may be used to calculate 1) DFT 2) IDFT 3) Direct Z Transform 4)
Indirect Z Transform
C : 1 & 3 correct
A : Finite length
B : Infinite length
C : Aperiodic Sequence
D : Continuous Sequence
Q.no 25.
A:4
B:3
C:2
D:1
Q.no 26.
A:
B:
C:
D:
A : {3,-j,1,j}
B : {1,1,1,1}
C : {1,2,3,4}
D : {0,1,1,1}
Q.no 29. The region of convergence of a causal finite duration discrete-time signal
is
Q.no 30. If two finite duration sequences x1(n) and x2(n) are linearly combined as
x3(n)=ax1(n)+bx2(n) then DFT of x3(n) is X3(K)=aX1(K)+bX2(K) this property is
called as
A : Periodicity
B : Linearity
Q.no 32. If X(k) is the N-point DFT of a sequence x(n), then what is the DFT of x*
(n)?
A : X(N-k)
B : X*(k)
C : X*(N-k)
Q.no 33.
D : Undefined
Q.no 34.
A:0
B:
C:
D:
Q.no 35.
A : Causal Signal
B : Odd Signal
C : Even Signal
D : Parabolic Signal
Q.no 36. If X(K) is N -point DFT of a finite duration sequence x(n) then
X(x+N)=x(n) for all n,this property is called as
A : Periodicity
B : Linearity
A:
B:
C:
D:
Q.no 39.
A:
B:
C:
D:
A : Advancing
B : Delaying
C : Time reversal
Q.no 41. Original information can be recovered completely from its sampled
version if the sampling frequency is?
A:
B:
C:
D:
A : Linear Filtering
B : Correlation
C : Spectrum analyasis
D : All of above
D : both a and b
Q.no 44. If difference equation of FIR filter is y(n)=x(n) + 0.5 x(n-1) - 0.2 x(n-2) +0.3
x(n-3) - 0.2 x(n-4) + 0.5 x(n-5) +x(n-6), to implement this liner phase FIR system,
number of delay elements required are
A:6
B:5
C:4
D:3
Q.no 45. In a circular convolution, if x(n) contains L no of samples and h(n) has M
no of samples, then the circular convolution will have the length of N = _________
A : N = min (L,M)
B : N = Max (L, M)
C:N=L+M-1
D:N=L+M+1
Q.no 46. What are the different ways to represents the Discrete-Time signals
A : Graphical Representation
B : Functional Representation
C : Tabular Representation
A : z=1
B : z=0
C : z=Infinity
D : Entire z-plane
Q.no 48. Where does the maximum value of auto-correlation function of a power
signal occur
A : At origin
B : At extremities
C : At unity
D : At infinity
D : Cannot be determined
Q.no 50.
A : Nonlinear system
B : Non-causal system
C : Causal system
D : Continuous Time System
Q.no 51. H(z) is discrete rational transfer function. To ensure that both H(z) and
its inverse are stable
A : Poles must be inside the unit circle and zeros must be outside the unit circle
D : Poles must be outside the unit circle and zeros must be inside the unit circle
Q.no 52. Which oscillations will be generated in the time domain response, if
complex conjugate poles are present with negative real part?
A : Damped oscillations
B : Undamped oscillations
C : Sustained oscillations
D : Can't Say
Q.no 53.
A : 1.5
B:0
C:
D:2
A:
B:
C:
D:
Q.no 55. Convolution of two sequences X1[n] and X2[n] are represented by
A : X1(z)*X2(z)
B : X1(z)X2(z)
C : X1(z)+X2(z)
D : X1(z)/X2(z)
Q.no 56. What are the tools used in a graphical method of finding convolution of
discrete time signals
A:
B:
C:
D:
A : Convolution integral
B : Convolution multiple
C : Convolution sum
D : Convolution
Q.no 60. If x1(n)={1,2,3,4} and x2{1,1,2,2} such that X3(K)=X1(K)X2(K) then x3(n)=
A : {15,17,15,13}
B : {13,15,17,15}
C : {15,15,13,14}
D : {13,17,15,15}
A : No Uncertainty
B : Uncertainty
C : Partial Uncertainty
D : Perfect Uncertainty
Q.no 2.
A:
B:
C : Less than 0
D : Always equal to 0
A : Laplace transform
B : Fourier transform
C : Z-transform
D : Integral
Q.no 4. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : X(n)
A : Signal itself
B : Impulse
C : A new signal
Q.no 7.
A:
B:
C:
D:
Q.no 8. A system which has non-unique relation between its input and output is?
A : Linear System
B : Causal System
C : Time-invariant system
D : Non-invertible System
Q.no 9. The Energy Density spectrum is the distribution of energy in the signal as
A : a function of Frequency
B : a function of time
D : both a and b
C : Z transform
D : Laplace transform
Q.no 11. A signal which is function of only one independent variable is called
A : Multichannel signal
B : Multidimensional Signal
C : One-dimensional signal
D : One-channel signal
A : an Even signal
B : an Odd signal
D : Both A and C
A : true
B : false
C : may be
D : may not
A : Static System
B : Causal System
C : Non-causal system
D : Unstable System
Q.no 15.
A:
B:
C:
D:
Q.no 16. If the IIR system has M number of polse and N number of zeros, then it
requires ------ number of delay elements to implement it using Direct Form-II.
A:M
B:N
C : M+N
D : Max(M,N)
Q.no 17. By defination, the DFT computes N equally spaced samples of the -----
A : DTFT
B : Laplace transform
C : Z transform
A : Physically realizable
B : Physically unrealizable
D : Both B and C
A : 0 to ∏
B : 0 to 2∏
C : 0 to ∏/2
D : 0 to 4∏/3
Q.no 20.
A:
B:
C:
D:
Q.no 21.
A:
B:
C:
D:
Q.no 22. In circular convolutions of 2 sequences x(n) & h(n) having lengths L & M
respectively, where M<L, then adding No of zeros to sequence h(n) is called as
_____
A : Zero Padding
B : Overlapping
C : Filtering
D : None of these
D : is not possible
Q.no 25. A signal is an energy signal if
A:
B:
C:
D:
Q.no 26.
A:
B:
C:
D:
Q.no 27. The Linear Convolution of 2 sequences x(n) of L no of Samples and h(n)
of M no of samples produces result y(n) which contains N samples of length
_______
A : N = L + M -1
B:N=L-M+1
C:N=L+M+1
D:N=L-M-1
Q.no 28.
A:0
B:
C:
D:
Q.no 29.
Q.no 30.
A : Causal Signal
B : Odd Signal
C : Even Signal
D : Parabolic Signal
Q.no 31.
B : Exponential Sequence
A : {3,-j,1,j}
B : {1,1,1,1}
C : {1,2,3,4}
D : {0,1,1,1}
Q.no 33. The circular convolution of 2 sequences in the time domain is equivalent
to
Q.no 34. The difference between DIT & DIF algorithm is that______
A : In DIT is i/p is bit reversal & o/p is in natural order, whereas in DIF i/p is natural &
o/p is bit reversal
B : In DIT, i/p is natural & o/p is bit reversal, whereas in DIF i/p is bit reversal & o/p is
natural
C : In DIT i/p is natural & o/p is also natural whereas in DIF i/p is bit reversal & o/p is
also bit reversal
D : In DIT i/p is bit reversal & o/p is also bit reversal, whereas in DIF i/p is natural & o/p
is also natural
Q.no 35. If X(K) is N -point DFT of a finite duration sequence x(n) then
X(x+N)=x(n) for all n,this property is called as
A : Periodicity
B : Linearity
Q.no 36. If two finite duration sequences x1(n) and x2(n) are linearly combined as
x3(n)=ax1(n)+bx2(n) then DFT of x3(n) is X3(K)=aX1(K)+bX2(K) this property is
called as
A : Periodicity
B : Linearity
Q.no 37. If X(k) is the N-point DFT of a sequence x(n), then what is the DFT of x*
(n)?
A : X(N-k)
B : X*(k)
C : X*(N-k)
Q.no 40.
A : Adder
B : Accumulator
C : Subtractor
D : Multiplier
Q.no 41.
A:
B:
C:
D:
Q.no 43. If difference equation of FIR filter is y(n)=x(n) + 0.5 x(n-1) - 0.2 x(n-2) +0.3
x(n-3) - 0.2 x(n-4) + 0.5 x(n-5) +x(n-6), to implement this liner phase FIR system,
number of delay elements required are
A:6
B:5
C:4
D:3
D : both a and b
A : z=1
B : z=0
C : z=Infinity
D : Entire z-plane
Q.no 47. Where does the maximum value of auto-correlation function of a power
signal occur
A : At origin
B : At extremities
C : At unity
D : At infinity
Q.no 48. In a circular convolution, if x(n) contains L no of samples and h(n) has M
no of samples, then the circular convolution will have the length of N = _________
A : N = min (L,M)
B : N = Max (L, M)
C:N=L+M-1
D:N=L+M+1
Q.no 49.
A : Nonlinear system
B : Non-causal system
C : Causal system
Q.no 50. Original information can be recovered completely from its sampled
version if the sampling frequency is?
A:
B:
C:
D:
Q.no 51. Which oscillations will be generated in the time domain response, if
complex conjugate poles are present with negative real part?
A : Damped oscillations
B : Undamped oscillations
C : Sustained oscillations
D : Can't Say
A : {5,4,6,6}
B : {4,5,6,6}
C : {6,6,5,4}
D : {6,5,4,6}
Q.no 53.
Q.no 54. H(z) is discrete rational transfer function. To ensure that both H(z) and
its inverse are stable
A : Poles must be inside the unit circle and zeros must be outside the unit circle
D : Poles must be outside the unit circle and zeros must be inside the unit circle
Q.no 55.
A:5
B : 1/0.8
C : 0.2
D:
A : Convolution integral
B : Convolution multiple
C : Convolution sum
D : Convolution
Q.no 57. If x1(n)={1,2,3,4} and x2{1,1,2,2} such that X3(K)=X1(K)X2(K) then x3(n)=
A : {15,17,15,13}
B : {13,15,17,15}
C : {15,15,13,14}
D : {13,17,15,15}
A:
B:
C:
D:
Q.no 60. What are the tools used in a graphical method of finding convolution of
discrete time signals
1) All questions are Multiple Choice Questions having single correct option.
7) Use only black/blue ball point pen to darken the appropriate circle.
Q.no 1. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
A : Infinite sequences
A : Source
C : Amplification
D : Output
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
A : Finite duration
B : Infinite duration
B : Only decoder
Q.no 9. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 11. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 12. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 13. Digital angular frequency has unit
C : No unit
D : Hz
A : Active
B : Passive
B : Inner product 1
C : outer product 1
D : Magnitude 1
C : Modulation
D : Quantization
Q.no 17. Which of the following techniques are NOT used to convert analog filter
to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 18. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 19. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
Q.no 20. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : Only Zeros
B : Only Poles
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 24. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
Q.no 25. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
Q.no 26. For a decimation-in-time FFT algorithm, which of the following is true?
A : square
B : Triangular
B : LPF
C : HPF
D : BPF
Q.no 29. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
Q.no 30. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
Q.no 31. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
Q.no 32. Which of the following is True regarding stability of IIR filters?
Q.no 33. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
C : Is an unit circle
D : In Z plane
Q.no 34. Mapping of points from the s-plane to the z-plane is implied by the
relation
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 37. Which of the following is true in case of Overlap add method?
Q.no 38. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
Q.no 39. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
D : BIBO Unstable
Q.no 40. Which frequency is calculated in Vibration Analysis for Defective Gear
Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
A : Source
D : Speaker
Q.no 42. Which one of the structures is NOT used for realisation of a digital IIR
filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
A : Channel Noise
B : Contact Noise
D : Interference Noise
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
A : LPF
B : HPF
D : DAC
Q.no 46. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
D : Only BIBO stable
Q.no 47. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 49. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 50. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
Q.no 51. With respect to finite word length, the zero-input limit cycle oscillations
are attributed to --------
A : Overflow of adders used in implementation of filters
Q.no 52. If cut-off frequency of a digital filter is 0.2π & T = 1sec, then the
equivalent analog cut-off frequency Ωc using BLT is equal to
A : 0.2
B:1
C : 0.65
D : 0.32
A : Source
C : Filter
D : Speaker
A : Contact noise
B : Channel noise
C : Interference
D : Intermodulation distortion
Q.no 55. What is the DFT of the four point sequence x(n)={0,1,2,3}?
A : {6,-2+2j-2,-2-2j}
B : {6,-2-2j,2,-2+2j}
C : {6,-2+2j,-2,-2-2j}
D : {6,-2-2j,-2,-2+2j}
B : HPF
C : BPF
D : APF
A : Source
B : Pre amplifier
C : Amplifier
D : Loudspeaker Enclosure
Q.no 58. What is the lowest order of the Butterworth filter with a pass band gain
KP=-1 dB at Ωp=4 rad/sec and stop band attenuation greater than or equal to 20dB
at Ωs = 8 rad/sec?
A:4
B:5
C:6
D:3
Q.no 60. Which of the following represents the salient features of a low pass
butterworth filter: (a) Magnitude response beyond Ωc is monotonically
decreasing b) Magnitude response is never constant at lower frequencies c) The
maximum gain occurs at Ω = 0
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 3. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
A : Source
C : Amplification
D : Output
Q.no 5. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
A : Finite duration
B : Infinite duration
Q.no 7. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
B : Inner product 1
C : outer product 1
D : Magnitude 1
C : No unit
D : Hz
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
A : Only Zeros
B : Only Poles
A : Infinite sequences
Q.no 13. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 14. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
Q.no 15. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
A : Only Encoder
B : Only decoder
Q.no 17. An analog LTI system with system function H(s) is stable
C : Modulation
D : Quantization
A : Active
B : Passive
Q.no 22. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 23. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
Q.no 24. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 25. Which of the following techniques are NOT used to convert analog filter
to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 26. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 28. With respect to finite word length, oscillations due to overflow are
attributed to --------
Q.no 29. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
Q.no 34. Physically realizable stable IIR filters cannot have a Linear Phase is True
for which type of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 37. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
A : Channel Noise
B : Contact Noise
D : Interference Noise
Q.no 39. For a decimation-in-time FFT algorithm, which of the following is true?
A : LPF
B : HPF
C : ADC & Mux
D : DAC
Q.no 41. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
Q.no 42. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
C : Is an unit circle
D : In Z plane
Q.no 43. Which of the following is true in case of Overlap add method?
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 45. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
A : Source
D : Speaker
Q.no 47. Which one of the structures is NOT used for realisation of a digital IIR
filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
Q.no 48. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
B : LPF
C : HPF
D : BPF
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 51. The 4-point discrete Fourier Transform (DFT) of a discrete time sequence
{1, 0, 2, 3} is
A : Noise generator
B : Pulse generator
C : Signal generator
A : Channel converter
B : Modulator
C : Digital Recorder
D : Not used
Q.no 54. How does the frequency of oscillations in the pass band of a low pass
filter varies with the value of M?
A : The discrete convolution between a sampled signal and a finite impulse response
(FIR) filter
C : The discrete convolution between a very long signal and a finite impulse response
(FIR) filter
D : The discrete convolution between a very long signal and a infinite impulse
response (IIR) filter
Q.no 56. Analog Signal has frequency 5 KHz and sampling frequency is 20 KHz
then aliasing signal lfrequency is
A : 4 KHz
B : 25KHz
C : 30KHz
D : 20KHz
A : Gap
B : Lands
C : Guards
D : Isolation
A : P wave
C : T wave
Q.no 60. What is the peak side lobe (in dB) for a rectangular window?
A : -13
B : -27
C : -32
D : -58
Q.no 1. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
A : Finite duration
B : Infinite duration
A : Source
C : Amplification
D : Output
Q.no 4. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
Q.no 6. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
A : Infinite sequences
Q.no 10. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
C : Modulation
D : Quantization
Q.no 12. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
A : Only Zeros
B : Only Poles
A : Active
B : Passive
C : Active and Passive
A : Only Encoder
B : Only decoder
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 17. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
B : Inner product 1
C : outer product 1
D : Magnitude 1
Q.no 21. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
Q.no 22. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 23. Which of the following techniques are NOT used to convert analog filter
to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 24. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
B : Expansion into a series of terms
C : No unit
D : Hz
Q.no 26. With respect to finite word length, oscillations due to overflow are
attributed to --------
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
Q.no 28. Mapping of points from the s-plane to the z-plane is implied by the
relation
Q.no 29. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
A : square
B : Triangular
D : cosine
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 32. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
Q.no 33. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
Q.no 35. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
Q.no 36. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
D : BIBO Unstable
Q.no 37. Which frequency is calculated in Vibration Analysis for Defective Gear
Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
Q.no 38. Which of the following is True regarding stability of IIR filters?
A : AC voltage
B : DC voltage
C : analog
D : digital
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 41. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
Q.no 42. Which one of the structures is NOT used for realisation of a digital IIR
filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
B : LPF
C : HPF
D : BPF
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
Q.no 48. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
B : BIBO stable and causal
C : BIBO causal
Q.no 49. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
A : Channel Noise
B : Contact Noise
D : Interference Noise
A : Source
C : Filter
D : Speaker
Q.no 52. Impulse Invariant technique is appropraite for design of following filters
A : Highpass filters
Q.no 53. What is the circular convolution of the sequences x1(n)={2,1,2,1} and
x2(n)={1,2,3,4}?
A : {14,14,16,16}
B : {16,16,14,14}
C : {2,3,6,4}
D : {14,16,14,16}
Q.no 54. What is the lowest order of the Butterworth filter with a pass band gain
KP=-1 dB at Ωp=4 rad/sec and stop band attenuation greater than or equal to 20dB
at Ωs = 8 rad/sec?
A:4
B:5
C:6
D:3
A : The jΩ axis into the unit circle in the Z-plane only once, thus avoiding aliasing of
frequency components
B : The jΩ axis into the unit circle in the Z-plane more than once, thus causing aliasing
of frequency components
C : The jΩ axis into the unit circle in the Z-plane only once, thus causing aliasing of
frequency components
D : The jΩ axis into the unit circle in the Z-plane more than once, thus avoiding aliasing
of frequency components
Q.no 56. Analog ECG signal contains frequency up to 100 Hz. Suppose signal is
sampled at the rate of 350 samples per second. What is highest frequency present
in the signal after sampling
A : 350 Hz
B : 250 Hz
C : 100Hz
D : 50Hz
Q.no 57. What is the peak side lobe (in dB) for a Hanning window?
A : -13
B : -27
C : -32
D : -58
Q.no 58. During design of IIR filters, direct 1-1 relationship between the frequency
variables in analog & frequency domain is ensured if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : The jΩ axis in the s-plane maps into the unit circle in the Z-plane
C : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
D : The jΩ axis in the s-plane maps outside the unit circle in the Z-plane
Q.no 59. If cut-off frequency of a digital filter is 0.2π & T = 1sec, then the
equivalent analog cut-off frequency Ωc using BLT is equal to
A : 0.2
B:1
C : 0.65
D : 0.32
C : speech signal
A : Infinite sequences
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 3. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
A : Source
C : Amplification
D : Output
Q.no 6. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 7. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
Q.no 8. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
A : Only Zeros
B : Only Poles
B : Inner product 1
C : outer product 1
D : Magnitude 1
Q.no 11. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 12. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
Q.no 13. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
C : Modulation
D : Quantization
C : No unit
D : Hz
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
Q.no 17. Which of the following techniques are NOT used to convert analog filter
to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 18. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
A : Only Encoder
B : Only decoder
Q.no 21. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
A : Active
B : Passive
Q.no 24. An analog LTI system with system function H(s) is stable
A : Finite duration
B : Infinite duration
A : square
B : Triangular
A : LPF
B : HPF
D : DAC
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 29. With respect to finite word length, oscillations due to overflow are
attributed to --------
Q.no 30. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
Q.no 31. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
D : In Z plane
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
A : Source
D : Speaker
Q.no 35. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 36. For a decimation-in-time FFT algorithm, which of the following is true?
Q.no 38. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
Q.no 39. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
Q.no 40. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
Q.no 41. Which of the following is true in case of Overlap add method?
A : M zeros are appended at last of each data block
Q.no 42. Physically realizable stable IIR filters cannot have a Linear Phase is True
for which type of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
Q.no 43. Mapping of points from the s-plane to the z-plane is implied by the
relation
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
A : Channel Noise
B : Contact Noise
D : Interference Noise
Q.no 46. Which frequency is calculated in Vibration Analysis for Defective Gear
Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
Q.no 47. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
Q.no 48. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
Q.no 49. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
Q.no 50. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
A : The discrete convolution between a sampled signal and a finite impulse response
(FIR) filter
C : The discrete convolution between a very long signal and a finite impulse response
(FIR) filter
D : The discrete convolution between a very long signal and a infinite impulse
response (IIR) filter
Q.no 52. The 4-point discrete Fourier Transform (DFT) of a discrete time sequence
{1, 0, 2, 3} is
A : Source
B : Pre amplifier
C : Amplifier
D : Loudspeaker Enclosure
A : Gap
B : Lands
C : Guards
D : Isolation
Q.no 56. Which of the following filter is characterised by ripple in both passband
and stopband
A : Chebyshey Type 1
B : Elliptic
C : Butterworth
D : Chebyshey Type 2
Q.no 58. Which of the following represents the salient features of a low pass
butterworth filter: (a) Magnitude response beyond Ωc is monotonically
decreasing b) Magnitude response is never constant at lower frequencies c) The
maximum gain occurs at Ω = 0
Q.no 59. Analog Signal has frequency 5 KHz and sampling frequency is 20 KHz
then aliasing signal lfrequency is
A : 4 KHz
B : 25KHz
C : 30KHz
D : 20KHz
Q.no 60. Which one of the structures of a digital IIR filter is used for high speed
filtering application?
A : Cascade Form
B : Direct Form 1
C : Direct Form 2
D : Parallel Form
Q.no 1. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
Q.no 3. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : Active
B : Passive
C : Active and Passive
A : Only Encoder
B : Only decoder
A : Source
C : Amplification
D : Output
C : Modulation
D : Quantization
A : Only Zeros
B : Only Poles
C : Poles and Zeros
Q.no 10. An analog LTI system with system function H(s) is stable
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 12. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
A : Finite duration
B : Infinite duration
Q.no 14. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
B : Expansion into a series of terms
Q.no 15. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
C : No unit
D : Hz
Q.no 18. Which of the following techniques are NOT used to convert analog filter
to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 19. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
A : Infinite sequences
Q.no 22. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
B : Inner product 1
C : outer product 1
D : Magnitude 1
Q.no 24. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 25. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 27. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
Q.no 28. Which of the following is True regarding stability of IIR filters?
Q.no 29. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
A : Includes unit circle
C : Is an unit circle
D : In Z plane
A : square
B : Triangular
D : cosine
B : LPF
C : HPF
D : BPF
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
Q.no 36. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
D : BIBO Unstable
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 38. With respect to finite word length, oscillations due to overflow are
attributed to --------
A : LPF
B : HPF
D : DAC
Q.no 40. Which one of the structures is NOT used for realisation of a digital IIR
filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
Q.no 41. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
Q.no 44. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
Q.no 45. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
Q.no 46. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
Q.no 47. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
Q.no 49. For a decimation-in-time FFT algorithm, which of the following is true?
Q.no 50. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 51. What is the lowest order of the Butterworth filter with a pass band gain
KP=-1 dB at Ωp=4 rad/sec and stop band attenuation greater than or equal to 20dB
at Ωs = 8 rad/sec?
A:4
B:5
C:6
D:3
Q.no 52. If cut-off frequency of a digital filter is 0.2π & T = 1sec, then the
equivalent analog cut-off frequency Ωc using BLT is equal to
A : 0.2
B:1
C : 0.65
D : 0.32
C : Filter
D : Speaker
A : Contact noise
B : Channel noise
C : Interference
D : Intermodulation distortion
Q.no 55. What is the peak side lobe (in dB) for a rectangular window?
A : -13
B : -27
C : -32
D : -58
Q.no 56. Analog ECG signal contains frequency up to 100 Hz. Suppose signal is
sampled at the rate of 350 samples per second. What is highest frequency present
in the signal after sampling
A : 350 Hz
B : 250 Hz
C : 100Hz
D : 50Hz
A : P wave
C : T wave
A : Channel converter
B : Modulator
C : Digital Recorder
D : Not used
Q.no 59. What is the peak side lobe (in dB) for a Hanning window?
A : -13
B : -27
C : -32
D : -58
Q.no 60. Impulse Invariant technique is appropraite for design of following filters
A : Highpass filters
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
A : infinite
B : 0.5
C:1
D : 1.5
Q.no 3. Which of the following techniques are NOT used to convert analog filter to
digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 4. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
A : Only Zeros
B : Only Poles
A : Active
B : Passive
A : Infinite sequences
B : Inner product 1
C : outer product 1
D : Magnitude 1
Q.no 10. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : Finite duration
B : Infinite duration
A : Source
C : Amplification
D : Output
Q.no 13. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 15. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
C : No unit
D : Hz
Q.no 17. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
Q.no 19. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 20. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
A : Only Encoder
B : Only decoder
Q.no 22. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
C : Modulation
D : Quantization
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
Q.no 26. Which of the following is true in case of Overlap add method?
Q.no 27. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
Q.no 28. Physically realizable stable IIR filters cannot have a Linear Phase is True
for which type of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
Q.no 29. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
A : Channel Noise
B : Contact Noise
D : Interference Noise
Q.no 33. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
Q.no 34. Which frequency is calculated in Vibration Analysis for Defective Gear
Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
Q.no 35. Mapping of points from the s-plane to the z-plane is implied by the
relation
A : Source
D : Speaker
Q.no 37. What are the main characteristics of Anti aliasing filter?
A : Ensures that bandwidth of signal to be sampled is limited to frequency range.
B : To limit the noise and other interference, which corrupts the signal
Q.no 38. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
D : BIBO Unstable
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 41. Which of the following is True regarding stability of IIR filters?
A : square
B : Triangular
D : cosine
Q.no 43. With respect to finite word length, oscillations due to overflow are
attributed to --------
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 45. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
C : Is an unit circle
D : In Z plane
B : LPF
C : HPF
D : BPF
Q.no 48. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
Q.no 51. What is the DFT of the four point sequence x(n)={0,1,2,3}?
A : {6,-2+2j-2,-2-2j}
B : {6,-2-2j,2,-2+2j}
C : {6,-2+2j,-2,-2-2j}
D : {6,-2-2j,-2,-2+2j}
Q.no 52. What is the circular convolution of the sequences x1(n)={2,1,2,1} and
x2(n)={1,2,3,4}?
A : {14,14,16,16}
B : {16,16,14,14}
C : {2,3,6,4}
D : {14,16,14,16}
A : Gap
B : Lands
C : Guards
D : Isolation
C : speech signal
Q.no 55. During design of IIR filters, direct 1-1 relationship between the frequency
variables in analog & frequency domain is ensured if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : The jΩ axis in the s-plane maps into the unit circle in the Z-plane
C : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
D : The jΩ axis in the s-plane maps outside the unit circle in the Z-plane
A : Noise generator
B : Pulse generator
C : Signal generator
Q.no 57. The 4-point discrete Fourier Transform (DFT) of a discrete time sequence
{1, 0, 2, 3} is
Q.no 58. With respect to finite word length, the zero-input limit cycle oscillations
are attributed to --------
A : LPF
B : HPF
C : BPF
D : APF
A : Source
B : Pre amplifier
C : Amplifier
D : Loudspeaker Enclosure
C : Modulation
D : Quantization
Q.no 2. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 3. Which of the following techniques are NOT used to convert analog filter to
digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
A : Infinite sequences
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
B : Inner product 1
C : outer product 1
D : Magnitude 1
C : No unit
D : Hz
A : Only Encoder
B : Only decoder
Q.no 9. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 10. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
Q.no 11. The circular convolution of two sequences in time domain is
equivalent to
Q.no 12. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 13. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
A : Active
B : Passive
Q.no 15. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
Q.no 16. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 17. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
Q.no 18. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 19. An analog LTI system with system function H(s) is stable
A : Finite duration
B : Infinite duration
A : Only Zeros
B : Only Poles
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
A : Source
C : Amplification
D : Output
Q.no 26. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
Q.no 27. For a decimation-in-time FFT algorithm, which of the following is true?
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 29. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
Q.no 30. Which one of the structures is NOT used for realisation of a digital IIR
filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
Q.no 31. Which of the following is true in case of Overlap add method?
Q.no 32. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
Q.no 33. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
Q.no 35. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 37. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
Q.no 38. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
A : LPF
B : HPF
D : DAC
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
Q.no 41. Physically realizable stable IIR filters cannot have a Linear Phase is True
for which type of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
A : Channel Noise
B : Contact Noise
D : Interference Noise
Q.no 43. With respect to finite word length, oscillations due to overflow are
attributed to --------
Q.no 44. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
B : volume control
C : Amplification control
D : Bass control
Q.no 46. Mapping of points from the s-plane to the z-plane is implied by the
relation
Q.no 47. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
B : LPF
C : HPF
D : BPF
Q.no 49. Which of the following is True regarding stability of IIR filters?
A : Source
D : Speaker
A : Source
C : Filter
D : Speaker
A : Channel converter
B : Modulator
C : Digital Recorder
D : Not used
Q.no 54. Analog ECG signal contains frequency up to 100 Hz. Suppose signal is
sampled at the rate of 350 samples per second. What is highest frequency present
in the signal after sampling
A : 350 Hz
B : 250 Hz
C : 100Hz
D : 50Hz
Q.no 55. What is the peak side lobe (in dB) for a rectangular window?
A : -13
B : -27
C : -32
D : -58
Q.no 56. Impulse Invariant technique is appropraite for design of following filters
A : Highpass filters
Q.no 57. What is the peak side lobe (in dB) for a Hanning window?
A : -13
B : -27
C : -32
D : -58
A : P wave
C : T wave
Q.no 59. Which of the following filter is characterised by ripple in both passband
and stopband
A : Chebyshey Type 1
B : Elliptic
C : Butterworth
D : Chebyshey Type 2
A : The jΩ axis into the unit circle in the Z-plane only once, thus avoiding aliasing of
frequency components
B : The jΩ axis into the unit circle in the Z-plane more than once, thus causing aliasing
of frequency components
C : The jΩ axis into the unit circle in the Z-plane only once, thus causing aliasing of
frequency components
D : The jΩ axis into the unit circle in the Z-plane more than once, thus avoiding aliasing
of frequency components
A : Infinite sequences
C : No unit
D : Hz
A : infinite
B : 0.5
C:1
D : 1.5
A : Only Encoder
B : Only decoder
A : Only Zeros
B : Only Poles
Q.no 6. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
Q.no 8. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
A : Source
C : Amplification
D : Output
A : Active
B : Passive
B : Inner product 1
C : outer product 1
D : Magnitude 1
Q.no 13. Which of the following techniques are NOT used to convert analog filter
to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
C : Modulation
D : Quantization
Q.no 15. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 16. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
Q.no 19. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 21. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
A : Finite duration
B : Infinite duration
Q.no 24. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 25. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 28. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
Q.no 29. Which frequency is calculated in Vibration Analysis for Defective Gear
Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
Q.no 30. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
C : Is an unit circle
D : In Z plane
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 32. For a decimation-in-time FFT algorithm, which of the following is true?
Q.no 33. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
A : square
B : Triangular
D : cosine
Q.no 36. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 38. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 40. Which one of the structures is NOT used for realisation of a digital IIR
filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
Q.no 41. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
Q.no 42. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
Q.no 43. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
Q.no 44. Which of the following is true in case of Overlap add method?
A : LPF
B : HPF
D : DAC
Q.no 46. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
A : Channel Noise
B : Contact Noise
C : Channel Noise and Contact Noise
D : Interference Noise
Q.no 49. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
Q.no 50. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 51. The 4-point discrete Fourier Transform (DFT) of a discrete time sequence
{1, 0, 2, 3} is
A : LPF
B : HPF
C : BPF
D : APF
Q.no 53. Which of the following represents the salient features of a low pass
butterworth filter: (a) Magnitude response beyond Ωc is monotonically
decreasing b) Magnitude response is never constant at lower frequencies c) The
maximum gain occurs at Ω = 0
Q.no 54. What is the circular convolution of the sequences x1(n)={2,1,2,1} and
x2(n)={1,2,3,4}?
A : {14,14,16,16}
B : {16,16,14,14}
C : {2,3,6,4}
D : {14,16,14,16}
Q.no 55. Analog Signal has frequency 5 KHz and sampling frequency is 20 KHz
then aliasing signal lfrequency is
A : 4 KHz
B : 25KHz
C : 30KHz
D : 20KHz
Q.no 57. If cut-off frequency of a digital filter is 0.2π & T = 1sec, then the
equivalent analog cut-off frequency Ωc using BLT is equal to
A : 0.2
B:1
C : 0.65
D : 0.32
Q.no 58. Which one of the structures of a digital IIR filter is used for high speed
filtering application?
A : Cascade Form
B : Direct Form 1
C : Direct Form 2
D : Parallel Form
A : Source
B : Pre amplifier
C : Amplifier
D : Loudspeaker Enclosure
A : Gap
B : Lands
C : Guards
D : Isolation
C : Modulation
D : Quantization
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
Q.no 3. Which of the following techniques are NOT used to convert analog filter to
digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 4. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 6. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 7. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
B : Expansion into a series of terms
A : infinite
B : 0.5
C:1
D : 1.5
C : No unit
D : Hz
B : Inner product 1
C : outer product 1
D : Magnitude 1
A : Only Encoder
B : Only decoder
A : Source
C : Amplification
D : Output
Q.no 14. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
A : Only Zeros
B : Only Poles
A : Active
B : Passive
Q.no 17. An analog LTI system with system function H(s) is stable
Q.no 18. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
Q.no 20. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
A : Infinite sequences
B : High pass
C : Aliasing
D : Anti aliasing
A : Finite duration
B : Infinite duration
Q.no 24. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
Q.no 26. Physically realizable stable IIR filters cannot have a Linear Phase is True
for which type of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
Q.no 27. Passive crossover is not able to control
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 28. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
Q.no 29. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
C : Is an unit circle
D : In Z plane
A : Source
D : Speaker
A : square
B : Triangular
D : cosine
Q.no 32. IIR Filters are -
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 34. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
Q.no 35. For a decimation-in-time FFT algorithm, which of the following is true?
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 37. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
Q.no 38. With respect to finite word length, oscillations due to overflow are
attributed to --------
Q.no 39. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
Q.no 41. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
D : BIBO Unstable
Q.no 42. Which of the following is True regarding stability of IIR filters?
B : LPF
C : HPF
D : BPF
Q.no 45. Which frequency is calculated in Vibration Analysis for Defective Gear
Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
Q.no 48. Mapping of points from the s-plane to the z-plane is implied by the
relation
Q.no 49. Which of the following is true in case of Overlap add method?
Q.no 50. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
A : Noise generator
B : Pulse generator
C : Signal generator
Q.no 52. Analog ECG signal contains frequency up to 100 Hz. Suppose signal is
sampled at the rate of 350 samples per second. What is highest frequency present
in the signal after sampling
A : 350 Hz
B : 250 Hz
C : 100Hz
D : 50Hz
A : Channel converter
B : Modulator
C : Digital Recorder
D : Not used
Q.no 54. With respect to finite word length, the zero-input limit cycle oscillations
are attributed to --------
Q.no 55. How does the frequency of oscillations in the pass band of a low pass
filter varies with the value of M?
C : speech signal
A : The discrete convolution between a sampled signal and a finite impulse response
(FIR) filter
C : The discrete convolution between a very long signal and a finite impulse response
(FIR) filter
D : The discrete convolution between a very long signal and a infinite impulse
response (IIR) filter
Q.no 58. During design of IIR filters, direct 1-1 relationship between the frequency
variables in analog & frequency domain is ensured if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : The jΩ axis in the s-plane maps into the unit circle in the Z-plane
C : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
D : The jΩ axis in the s-plane maps outside the unit circle in the Z-plane
Q.no 59. Impulse Invariant technique is appropraite for design of following filters
A : Highpass filters
A : The jΩ axis into the unit circle in the Z-plane only once, thus avoiding aliasing of
frequency components
B : The jΩ axis into the unit circle in the Z-plane more than once, thus causing aliasing
of frequency components
C : The jΩ axis into the unit circle in the Z-plane only once, thus causing aliasing of
frequency components
D : The jΩ axis into the unit circle in the Z-plane more than once, thus avoiding aliasing
of frequency components
A : Only Encoder
B : Only decoder
Q.no 2. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : infinite
B : 0.5
C:1
D : 1.5
A : Only Zeros
B : Only Poles
A : Infinite sequences
C : No unit
D : Hz
B : Inner product 1
C : outer product 1
D : Magnitude 1
Q.no 8. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
Q.no 9. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 10. An analog LTI system with system function H(s) is stable
C : Modulation
D : Quantization
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
Q.no 14. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 15. Type of digital crossover
A : Active
B : Passive
A : Finite duration
B : Infinite duration
Q.no 19. Which of the following techniques are NOT used to convert analog filter
to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 20. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 22. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
A : Source
C : Amplification
D : Output
Q.no 24. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 25. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 26. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
A : LPF
B : HPF
D : DAC
A : Channel Noise
B : Contact Noise
D : Interference Noise
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 31. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 32. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
Q.no 33. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
Q.no 34. Physically realizable stable IIR filters cannot have a Linear Phase is True
for which type of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
Q.no 35. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
Q.no 36. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
Q.no 37. Which one of the structures is NOT used for realisation of a digital IIR
filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 39. Which of the following is True regarding stability of IIR filters?
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 42. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
C : Is an unit circle
D : In Z plane
Q.no 43. Mapping of points from the s-plane to the z-plane is implied by the
relation
Q.no 44. With respect to finite word length, oscillations due to overflow are
attributed to --------
Q.no 45. For a decimation-in-time FFT algorithm, which of the following is true?
A : square
B : Triangular
D : cosine
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
B : LPF
C : HPF
D : BPF
Q.no 49. Which frequency is calculated in Vibration Analysis for Defective Gear
Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
A : Source
C : Filter
D : Speaker
A : Source
B : Pre amplifier
C : Amplifier
D : Loudspeaker Enclosure
A : LPF
B : HPF
C : BPF
D : APF
A : Contact noise
B : Channel noise
C : Interference
D : Intermodulation distortion
A : P wave
C : T wave
Q.no 56. If cut-off frequency of a digital filter is 0.2π & T = 1sec, then the
equivalent analog cut-off frequency Ωc using BLT is equal to
A : 0.2
B:1
C : 0.65
D : 0.32
Q.no 57. What is the DFT of the four point sequence x(n)={0,1,2,3}?
A : {6,-2+2j-2,-2-2j}
B : {6,-2-2j,2,-2+2j}
C : {6,-2+2j,-2,-2-2j}
D : {6,-2-2j,-2,-2+2j}
Q.no 58. The 4-point discrete Fourier Transform (DFT) of a discrete time sequence
{1, 0, 2, 3} is
Q.no 60. What is the circular convolution of the sequences x1(n)={2,1,2,1} and
x2(n)={1,2,3,4}?
A : {14,14,16,16}
B : {16,16,14,14}
C : {2,3,6,4}
D : {14,16,14,16}
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
Q.no 2. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
D : Hz
Q.no 5. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : Only Zeros
B : Only Poles
A : Active
B : Passive
A : Infinite sequences
Q.no 11. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 12. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
Q.no 13. Which of the following techniques are NOT used to convert analog filter
to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 14. An analog LTI system with system function H(s) is stable
C : Modulation
D : Quantization
Q.no 16. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
Q.no 17. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
C : outer product 1
D : Magnitude 1
A : Only Encoder
B : Only decoder
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 21. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
A : Source
C : Amplification
D : Output
Q.no 23. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 24. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
A : Finite duration
B : Infinite duration
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 27. Which of the following is true in case of Overlap add method?
Q.no 28. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
A : LPF
B : HPF
D : DAC
A : Source
D : Speaker
Q.no 31. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 33. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 34. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
Q.no 35. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
Q.no 36. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
A : Channel Noise
B : Contact Noise
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
Q.no 41. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
D : BIBO Unstable
Q.no 42. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
Q.no 43. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
Q.no 44. Which frequency is calculated in Vibration Analysis for Defective Gear
Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
Q.no 45. For a decimation-in-time FFT algorithm, which of the following is true?
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 47. Mapping of points from the s-plane to the z-plane is implied by the
relation
Q.no 48. With respect to finite word length, oscillations due to overflow are
attributed to --------
Q.no 49. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
B : LPF
C : HPF
D : BPF
Q.no 51. What is the peak side lobe (in dB) for a Hanning window?
A : -13
B : -27
C : -32
D : -58
Q.no 52. Which of the following represents the salient features of a low pass
butterworth filter: (a) Magnitude response beyond Ωc is monotonically
decreasing b) Magnitude response is never constant at lower frequencies c) The
maximum gain occurs at Ω = 0
Q.no 53. During design of IIR filters, direct 1-1 relationship between the frequency
variables in analog & frequency domain is ensured if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : The jΩ axis in the s-plane maps into the unit circle in the Z-plane
C : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
D : The jΩ axis in the s-plane maps outside the unit circle in the Z-plane
A : The discrete convolution between a sampled signal and a finite impulse response
(FIR) filter
C : The discrete convolution between a very long signal and a finite impulse response
(FIR) filter
D : The discrete convolution between a very long signal and a infinite impulse
response (IIR) filter
Q.no 56. How does the frequency of oscillations in the pass band of a low pass
filter varies with the value of M?
A : Decrease with increase in M
Q.no 57. What is the peak side lobe (in dB) for a rectangular window?
A : -13
B : -27
C : -32
D : -58
Q.no 58. Analog Signal has frequency 5 KHz and sampling frequency is 20 KHz
then aliasing signal lfrequency is
A : 4 KHz
B : 25KHz
C : 30KHz
D : 20KHz
Q.no 59. Which one of the structures of a digital IIR filter is used for high speed
filtering application?
A : Cascade Form
B : Direct Form 1
C : Direct Form 2
D : Parallel Form
A : Gap
B : Lands
C : Guards
D : Isolation
Q.no 1. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 3. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
Q.no 4. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 5. Which of the following techniques are NOT used to convert analog filter to
digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
A : Source
C : Amplification
D : Output
Q.no 7. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
D : Hz
Q.no 11. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
C : Modulation
D : Quantization
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
B : Inner product 1
C : outer product 1
D : Magnitude 1
A : Active
B : Passive
C : Active and Passive
A : Finite duration
B : Infinite duration
A : Only Zeros
B : Only Poles
Q.no 18. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 19. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
A : Only Encoder
B : Only decoder
A : Infinite sequences
Q.no 24. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 25. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : LPF
B : HPF
D : DAC
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
A : Source
D : Speaker
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 31. Which one of the structures is NOT used for realisation of a digital IIR
filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 33. Which of the following is True regarding stability of IIR filters?
Q.no 35. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
Q.no 36. Which of the following is true in case of Overlap add method?
A : square
B : Triangular
D : cosine
Q.no 38. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
Q.no 39. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
C : Is an unit circle
D : In Z plane
Q.no 40. Physically realizable stable IIR filters cannot have a Linear Phase is True
for which type of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
Q.no 41. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
Q.no 43. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
Q.no 44. For a decimation-in-time FFT algorithm, which of the following is true?
Q.no 45. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
Q.no 46. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
Q.no 47. With respect to finite word length, oscillations due to overflow are
attributed to --------
Q.no 48. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
D : BIBO Unstable
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
Q.no 51. If cut-off frequency of a digital filter is 0.2π & T = 1sec, then the
equivalent analog cut-off frequency Ωc using BLT is equal to
A : 0.2
B:1
C : 0.65
D : 0.32
Q.no 52. Impulse Invariant technique is appropraite for design of following filters
A : Highpass filters
Q.no 53. What is the lowest order of the Butterworth filter with a pass band gain
KP=-1 dB at Ωp=4 rad/sec and stop band attenuation greater than or equal to 20dB
at Ωs = 8 rad/sec?
A:4
B:5
C:6
D:3
Q.no 54. What is the DFT of the four point sequence x(n)={0,1,2,3}?
A : {6,-2+2j-2,-2-2j}
B : {6,-2-2j,2,-2+2j}
C : {6,-2+2j,-2,-2-2j}
D : {6,-2-2j,-2,-2+2j}
Q.no 55. With respect to finite word length, the zero-input limit cycle oscillations
are attributed to --------
A : The jΩ axis into the unit circle in the Z-plane only once, thus avoiding aliasing of
frequency components
B : The jΩ axis into the unit circle in the Z-plane more than once, thus causing aliasing
of frequency components
C : The jΩ axis into the unit circle in the Z-plane only once, thus causing aliasing of
frequency components
D : The jΩ axis into the unit circle in the Z-plane more than once, thus avoiding aliasing
of frequency components
Q.no 57. What is the circular convolution of the sequences x1(n)={2,1,2,1} and
x2(n)={1,2,3,4}?
A : {14,14,16,16}
B : {16,16,14,14}
C : {2,3,6,4}
D : {14,16,14,16}
C : speech signal
D : generic data compression algorithms
Q.no 59. Which of the following filter is characterised by ripple in both passband
and stopband
A : Chebyshey Type 1
B : Elliptic
C : Butterworth
D : Chebyshey Type 2
A : Source
C : Filter
D : Speaker
A : Only Encoder
B : Only decoder
Q.no 2. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
A : Only Zeros
B : Only Poles
C : Poles and Zeros
Q.no 4. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
A : Active
B : Passive
B : Inner product 1
C : outer product 1
D : Magnitude 1
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 9. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 10. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 11. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 12. Which of the following techniques are NOT used to convert analog filter
to digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
Q.no 15. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
Q.no 16. An analog LTI system with system function H(s) is stable
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
A : Infinite sequences
B : Finite discrete sequences
A : Source
C : Amplification
D : Output
Q.no 20. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
Q.no 21. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
C : Modulation
D : Quantization
C : No unit
D : Hz
A : Finite duration
B : Infinite duration
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
Q.no 28. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 29. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
A : Source
D : Speaker
Q.no 31. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
B : LPF
C : HPF
D : BPF
Q.no 33. Frequency Discriminator in Voice encoders are used before
A : LPF
B : HPF
D : DAC
A : Channel Noise
B : Contact Noise
D : Interference Noise
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 36. Mapping of points from the s-plane to the z-plane is implied by the
relation
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
Q.no 39. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 41. Which of the following is true in case of Overlap add method?
Q.no 42. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
Q.no 43. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
D : BIBO Unstable
Q.no 44. For a decimation-in-time FFT algorithm, which of the following is true?
Q.no 45. With respect to finite word length, oscillations due to overflow are
attributed to --------
Q.no 46. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
Q.no 47. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
D : In Z plane
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
A : square
B : Triangular
D : cosine
Q.no 51. Analog ECG signal contains frequency up to 100 Hz. Suppose signal is
sampled at the rate of 350 samples per second. What is highest frequency present
in the signal after sampling
A : 350 Hz
B : 250 Hz
C : 100Hz
D : 50Hz
A : The discrete convolution between a sampled signal and a finite impulse response
(FIR) filter
B : The discrete convolution between a sampled signal and an infinite impulse
response (IIR) filter
C : The discrete convolution between a very long signal and a finite impulse response
(FIR) filter
D : The discrete convolution between a very long signal and a infinite impulse
response (IIR) filter
A : P wave
C : T wave
A : Contact noise
B : Channel noise
C : Interference
D : Intermodulation distortion
Q.no 55. Which of the following represents the salient features of a low pass
butterworth filter: (a) Magnitude response beyond Ωc is monotonically
decreasing b) Magnitude response is never constant at lower frequencies c) The
maximum gain occurs at Ω = 0
Q.no 57. The 4-point discrete Fourier Transform (DFT) of a discrete time sequence
{1, 0, 2, 3} is
A : Channel converter
B : Modulator
C : Digital Recorder
D : Not used
A : LPF
B : HPF
C : BPF
D : APF
A : Gap
B : Lands
C : Guards
D : Isolation
Q.no 2. Which of the following techniques are NOT used to convert analog filter to
digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
Q.no 3. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
A : Only Zeros
B : Only Poles
A : Active
B : Passive
Q.no 6. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
Q.no 7. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
Q.no 8. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
A : Only Encoder
B : Only decoder
A : Finite duration
B : Infinite duration
Q.no 11. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 12. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 13. Normalized frequency of discrete time signal has maximum value
A : infinite
B : 0.5
C:1
D : 1.5
Q.no 14. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
A : Infinite sequences
C : outer product 1
D : Magnitude 1
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
Q.no 19. For what kind of signals one sided z-transform is unique?
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
Q.no 20. An analog LTI system with system function H(s) is stable
C : No unit
D : Hz
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
A : Source
C : Amplification
D : Output
C : Modulation
D : Quantization
Q.no 26. Which of the following is True regarding stability of IIR filters?
Q.no 27. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
Q.no 28. The digital filter used to remove the stationary power line interference
D : Elliptic Filter
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
Q.no 30. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 31. What are the main characteristics of Anti aliasing filter?
A : Ensures that bandwidth of signal to be sampled is limited to frequency range.
B : To limit the noise and other interference, which corrupts the signal
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 34. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
A : Amplification control
B : volume control
C : Electron flow
D : Boost control
Q.no 36. Physically realizable stable IIR filters cannot have a Linear Phase is True
for which type of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
Q.no 37. A stable analog filter will be converted to a stable digital filter if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : Left-half plane (LHP) of the S-plane maps outside the unit circle in the Z-plane
C : Right-half plane (RHP) of the S-plane maps outside the unit circle in in the Z-plane
D : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
Q.no 38. Which one of the structures is NOT used for realisation of a digital IIR
filter?
B : Lattice Form
C : Cascade Form
D : Parallel Form
A : Attenuation increases
B : Quality Decreases
C : BW Decreases
D : Attenuation decreases
Q.no 41. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
A : Source
D : Speaker
Q.no 43. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
A : 0.5Hz to 80 Hz
B : 20 Hz to 20KHz
C : 1Hz to 10Hz
D : 10 Hz to 1 KHz
Q.no 46. If all the poles of H(z) are outside the unit circle, then the system is said
to be
A : Only causal
D : BIBO Unstable
Q.no 47. With respect to finite word length, oscillations due to overflow are
attributed to --------
A : square
B : Triangular
D : cosine
A : AC voltage
B : DC voltage
C : analog
D : digital
Q.no 50. Which frequency is calculated in Vibration Analysis for Defective Gear
Teeth
A : Low frequency
B : Meshing Frequency
C : High Frequency
D : Medium frequency
A : The jΩ axis into the unit circle in the Z-plane only once, thus avoiding aliasing of
frequency components
B : The jΩ axis into the unit circle in the Z-plane more than once, thus causing aliasing
of frequency components
C : The jΩ axis into the unit circle in the Z-plane only once, thus causing aliasing of
frequency components
D : The jΩ axis into the unit circle in the Z-plane more than once, thus avoiding aliasing
of frequency components
Q.no 52. What is the peak side lobe (in dB) for a rectangular window?
A : -13
B : -27
C : -32
D : -58
A : Noise generator
B : Pulse generator
C : Signal generator
Q.no 54. Which of the following filter is characterised by ripple in both passband
and stopband
A : Chebyshey Type 1
B : Elliptic
C : Butterworth
D : Chebyshey Type 2
A : Source
B : Pre amplifier
C : Amplifier
D : Loudspeaker Enclosure
Q.no 56. Analog Signal has frequency 5 KHz and sampling frequency is 20 KHz
then aliasing signal lfrequency is
A : 4 KHz
B : 25KHz
C : 30KHz
D : 20KHz
Q.no 57. What is the circular convolution of the sequences x1(n)={2,1,2,1} and
x2(n)={1,2,3,4}?
A : {14,14,16,16}
B : {16,16,14,14}
C : {2,3,6,4}
D : {14,16,14,16}
Q.no 58. With respect to finite word length, the zero-input limit cycle oscillations
are attributed to --------
Q.no 59. If cut-off frequency of a digital filter is 0.2π & T = 1sec, then the
equivalent analog cut-off frequency Ωc using BLT is equal to
A : 0.2
B:1
C : 0.65
D : 0.32
A : Source
C : Amplification
D : Output
Q.no 4. If x(n) and X(k) are an N-point DFT pair, then X(k+N)=?
A : X(-k)
B : -X(k)
C : X(k)
D : -X(-k)
A : infinite
B : 0.5
C:1
D : 1.5
Q.no 6. Which of the following techniques are NOT used to convert analog filter to
digital filter
A : Successive Approximation
B : Impulse Invariant
C : Approximation of Derivatives
D : Bilinear Transformation
A : Active
B : Passive
A : band stop
B : High pass
C : Aliasing
D : Anti aliasing
B : Only Poles
Q.no 10. Which of the following method is not used to find the inverse z-transform
of a signal?
A : Counter integration
A : Finite duration
B : Infinite duration
C : No unit
D : Hz
Q.no 13. Which of the following is done to convert a continuous time signal into
discrete time signal?
A : Modulating
B : Sampling
C : Differentiating
D : Integrating
Q.no 14. What is the set of all values of z for which X(z) attains a finite value?
A : Radius of convergence
B : Radius of divergence
C : Feasible solution
D : Region of convergence
B : Inner product 1
C : outer product 1
D : Magnitude 1
A : low frequency
B : high frequency
C : medium frequency
D : All frequency
A : Infinite sequences
A : All signals
B : Anti-causal signal
C : Causal signal
D : Linear
A : Only Encoder
B : Only decoder
C : Modulation
D : Quantization
Q.no 23. If X1(k) and X2(k) are the N-point DFTs of X1(n) and x2(n) respectively,
then what is the N-point DFT of x(n)=ax1(n)+bx2(n)?
A : X1(ak)+X2(bk)
B : aX1(k)+bX2(k)
C : akX1(k)+bkX2(k)
D : X1(ak)-X2(bk)
Q.no 24. In Overlap add method, what is the length of each input data block?
A : L-1
B:L
C : L+1
D : L+2
Q.no 25. IIR Filter design methods are based on different mapping functions used
for mapping following domains
A : DFT to Z domain
B : S domain to Z domain
C : Z domain to S domain
D : Z domain to DFT
Q.no 27. Which of the following is true in case of Overlap add method?
Q.no 28. In Overlap save method of long sequence filtering, how many zeros are
appended to the impulse response of the FIR filter if the siz of each small block of
input sequence is L?
A : L+M
B:L
C:L+1
D : L-1
Q.no 29. Which of the following is True regarding stability of IIR filters?
Q.no 30. A linear time invariant system is said to be BIBO stable if and only if the
ROC of the system function
C : Is an unit circle
D : In Z plane
A : LPF
B : HPF
D : DAC
Q.no 32. Which of the following is used after DAC and DEMUX in Voice decoders
A : Balance Modulator
B : Amplifier
C : MUX
D : DEMUX
Q.no 33. Which of the following rule is used in the bilinear transformation?
A : Simpson’s rule
B : Backward difference
C : Forward difference
D : Trapezoidal rule
B : LPF
C : HPF
D : BPF
A : Electron flow
B : volume control
C : Amplification control
D : Bass control
Q.no 36. For a decimation-in-time FFT algorithm, which of the following is true?
A : Channel Noise
B : Contact Noise
D : Interference Noise
Q.no 38. The digital filter used to remove the stationary power line interference
Q.no 39. If all the poles of H(z) are inside the unit circle, then the system is said to
be
A : Only causal
C : BIBO causal
Q.no 40. Mapping of points from the s-plane to the z-plane is implied by the
relation
Q.no 41. What are the main characteristics of Anti aliasing filter?
B : To limit the noise and other interference, which corrupts the signal
Q.no 42. Consider the assertions given below. Which among them is an advantage
of FIR Filter?
A : AC voltage
B : DC voltage
C : analog
D : digital
A : 50 Hz to 60Hz
B : 60Hz to 70Hz
C : 10 Hz to 20Hz
D : 20Hz to 40Hz
Q.no 45. Physically realizable stable IIR filters cannot have a Linear Phase is True
for which type of filter
A : FIR filter
B : IIR filter
C : Analog filter
D : Digital filter
A : Designing of digital filter in analog domain and tranforming into digital domain
B : Designing of digital filter in digital domain and tranforming into analog domain
C : Designing of analog filter in analog domain and tranforming into digital domain
Q.no 47. The large side lobes of W(ω) results in which of the following undesirable
effects?
A : Circling effects
B : Broadening effects
C : Ringing effects
D : quantization
D : Speaker
Q.no 50. The poles of a Butterworth filter lie on a ----------- and poles of a Chebyshev
filter lie on a -------------
A : Ellipse, Circle
B : Ellipse, Trapezoid
C : Circle, Circle
D : Circle, Ellipse
A : LPF
B : HPF
C : BPF
D : APF
Q.no 52. What is the peak side lobe (in dB) for a Hanning window?
A : -13
B : -27
C : -32
D : -58
Q.no 53. What is the DFT of the four point sequence x(n)={0,1,2,3}?
A : {6,-2+2j-2,-2-2j}
B : {6,-2-2j,2,-2+2j}
C : {6,-2+2j,-2,-2-2j}
D : {6,-2-2j,-2,-2+2j}
A : Source
C : Filter
D : Speaker
Q.no 55. Analog ECG signal contains frequency up to 100 Hz. Suppose signal is
sampled at the rate of 350 samples per second. What is highest frequency present
in the signal after sampling
A : 350 Hz
B : 250 Hz
C : 100Hz
D : 50Hz
C : speech signal
Q.no 57. Impulse Invariant technique is appropraite for design of following filters
A : Highpass filters
A : Gap
B : Lands
C : Guards
D : Isolation
Q.no 59. During design of IIR filters, direct 1-1 relationship between the frequency
variables in analog & frequency domain is ensured if
A : Right-half plane (RHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
B : The jΩ axis in the s-plane maps into the unit circle in the Z-plane
C : Left-half plane (LHP) of the S-plane maps into the inside of the unit circle in the Z-
plane
D : The jΩ axis in the s-plane maps outside the unit circle in the Z-plane