Professional Documents
Culture Documents
FEATURES
Versatility: wide application range
□ Finetrol valves are suitable for liquid, gas, steam and
slurry applications.
□ Choice of body lengths to directly replace both globe
style and rotary style valves with a one-piece body
construction. Low cost of ownership
□ All actuator mounting directions can be used □ Large diameter shafts and heavy duty bearings.
□ Temperature limits -80 °C ... +425 ° / -110 °F…+800 °F □ Heavy duty reliable actuators.
with the standard construction. □ Predictive maintenance and asset management fea-
Cryogenic version -200 °C / -390 °F. tures.
□ Full conformity to both ASME and EN standard require-
ments. Noise/cavitation abatement
□ Fulfils NACE MR0103-2003 requirements. □ Patented Q-Trim®: rotating attenuator design provides
up to 18 dB (A) noise attenuation, self-flushing for
Accurate control impure fluids, high Cv and wide rangeability.
□ The plug shape of the Finetrol valve is engineered to □ Q-Trim + valve outlet attenuator plate construction
offer a constant gain expanded to a full 90° rotation. extends Q-Trim performance for high pressure drop ratios
□ Optimum flow characteristic through plug shape, and provides extra noise attenuation, up to 23 dB (A).
instead of positioner cams, provides control valve
dynamic performance and control loop stability. Easy maintenance
□ Plug shape provides balanced dynamic torque. □ Seat can be removed without valve disassembly.
□ High rangeability minimizes need for reduced Cv-trim □ Spiral groove joint between seat and the valve body
and trim changes. guarantees perfect alignment of seat without feeler
gauges or lapping.
Safety □ Heavy square threads between valve body and seat
□ SIL 3 certified ensures easy seat removal. (rusting and jamming pre-
□ Fire-tested and certified. vented).
□ Anti-blowout feature is achieved by enlarged stem □ No pins, retaining bolts or shims.
diameter. □ Valve assembly is simple and self-aligning.
□ Valve turns clockwise to close.
□ Rugged one-piece-body construction minimizes
potential leak paths and makes the valve insensitive to
pipe stress.
Environmental design
□ Live loaded standard packing and rotary operation
5 FT 20 EN • 8/2014
TECHNICAL SPECIFICATION
Product type Eccentric rotary plug valve, flanged Flow characteristic Inherent linear characteristics. Please
Sizes DN 25, 40, 50, 80, 100, 150, 200, 250 use the valve selection and sizing tool
Inch 1, 1 1/2, 2, 3, 4, 6, 8, 10 to verify the installed gain and flow
Pressure ratingsASME Class 150-600 / PN10-100. characteristics according to the proc-
End connections See table 1. on page 3. ess data.
Face-to-face Flow direction FTO = FLOW TO OPEN. Flow through
Design FC: ASME/ISA S75.04 = IEC/DIN 534-3-2 seat ring and past the plug. Standard
Design FG: ASME/ISA S75.03 (Globe valve length) flow direction.
Maximum shut-off pressure FTC = FLOW TO CLOSE. Flow past the
See table 2. on page 3. plug and through the seat ring. Rec-
See page 6 for maximum pressure drops ommended for erosive and flashing
available with different actuators. services.
Shut-off classification Class VI with soft seat (1"~6") Flow capacity See table below.
Class IV with metal seat per ANSI FCI 70-2. Valve plug rotation Clockwise to close.
(0.01 % of valve rated capacity).
OPTIONS
Materials See page 5.
Q-trim
Temperature range Metal seat: -200...+425 °C
Sizes DN 50, 80, 100, 150, 200, 250
See table 3. on page 3.
Inch 2, 3, 4, 6, 8, 10
Soft seat: -50...+260 °C
Q-Trim + valve outlet plate (design FG only)
Trim style Quarter turn eccentric rotary plug.
Sizes DN 50, 80, 100, 150, 200, 250
Inch 2, 3, 4, 6, 8, 10
Plates on valve outlet
Attenuator plate = standard plate used in gas applications.
Flow Q2 plate = advanced noise attenuation plate for gas
application including 3 capacity options.
Baffle plate = customized plate used in liquid
applications.
Reduced Cv trim One reduction (50 %)/size is available on
Finetrol, flow to open.
standard metal seated valve.
MAXIMUM Cv-VALUES
90° ROTATION
Q trim with
Valve size Valve size Standard Metal Seat Soft seat Q trim with metal seat Q trim +attenuator
soft seat
DN inch
FTO FTC FTO FTC FTO FTO FTO
Size/red" Size/red
Cv100 %
Cv100 % CvR100 % Cv100 % CvR100 % Cv100 % Cv100 % Cv100 % CvR100 % Cv100 % Cv100 %
Soft seat
25 1 14,5 7,9 16,5 7,9 7,5 8 – – – – –
40 1 1/2 31 15,5 39 15,5 17,5 22 – – – – –
50 2 52 26 62 26 35 40 31 22 25 22 19
80 3 137 66 155 66 105 120 84 56 75 54 49
100 4 239 120 265 120 195 220 144 95 130 94 85
150 6 520 260 575 260 440 480 310 210 290 208 195
200 8 870 440 1050 440 730 880 540 350 490 366 335
250 10 1330 680 1540 680 1100 1250 840 550 760 538 490
Cv R = 50 % reduced Cv seat. FTO = Flow to open FTC = Flow to close
80
ASME 600
60
ASME 300
40
20
ASME 150
0
0 100 200 300 400425 500
Temperature [°C]
100
sizes 1” - 6” only
80
Pressure [bar]
ASME 600
60
40
ASME 300
20
ASME 150
0
0 100 200 300 400 425 500
Temperature [°C]
Note: For applications involving cavitation, impurities or excessive noise, contact Metso for max Δp.
TEMPERATURE RANGES
Metal seat valve Soft seat valve
WCC/1.0619 body -29 … +425 °C* -20 … +800 °F* -29 … +260 °C* -20 … +500 °F*
CF8M/1.4408 body -80 … +425 °C* -110 … +800 °F* -50 … +260 °C* -58 … +500 °F*
CF8M Low temperature/cryo -200 °C (min)** -328 °F** N/A N/A
Graphite (PTFE lubricated) packing is recommended above 250 °C / 480 °F and for firesafe applications.
* Standard construction, no extension pipe needed.
** Extension pipe needed.
0 degree rotation / Closed position 30 degree rotation showing effect of patented Open position / 80 degree rotation
balanced eccentric rotary plug design
TA/TB TA/TB
Live-loaded PTFE / V-ring construction. Live-loaded graphite (PTFE lubricated) construction. TA-Luft &
TA-Luft certified. Standard construction. ISO 15848-1certified. Standard construction for high temperature
applications (+250 °C to +425 °C / +482 °F to +797 °F).
150 Disc spring set SIS 2324 & CrMO steel + ENP
ACTUATORS POSITIONERS
Spring
to
open
ØB
DN G F
Spring
to J I
close A1
H
A
DN
G
A1 J I
A
Hmax
ASME DIN
VALVE AND Normal face-to-face, Normal face-to-face,
Globe face-to-face, series FG
ACTUATOR series FC series FC
SIZE ASME/ISA ASME/ISA S75.03 IEC/DIN
S75.04 150 300 600 534-3-2
Kg / lbs
DN B1C A Kg / lbs A A Kg / lbs
25 (1) 6 102 (4.02) 12 / 27 184 (7.24) 197 (7.76) 210 (8.27) 13 / 29 102 (4.02) 12 / 27
40 (1 1/2) 6 114 (4.49) 16 / 36 222 (8.74) 235 (9.25) 251 (9.88) 17 / 38 114 (4.49) 16 / 36
50 (2) 6 124 (4.88) 23 / 51 254 (10.00) 267 (10.51) 286 (11.26) 25 / 55 124 (4.88) 23 / 51
50 (2) 9 124 (4.88) 28 / 62 254 (10.00) 267 (10.51) 286 (11.26) 30 / 66 124 (4.88) 28 / 62
80 (3) 9 165 (6.50) 34 / 75 298 (11.73) 318 (12.52) 337 (13.27) 38 / 84 165 (6.50) 34 / 75
80 (3) 11 165 (6.50) 40 / 88 298 (11.73) 318 (12.52) 337 (13.27) 44 / 97 165 (6.50) 40 / 88
100 (4) 11 194 (7.64) 54 / 119 352 (13.86) 368 (14.49) 394 (15.51) 62 / 137 194 (7.64) 54 / 119
100 (4) 13 194 (7.64) 70 / 154 352 (13.86) 368 (14.49) 394 (15.51) 78 / 172 194 (7.64) 70 / 154
150 (6) 13 229 (9.02) 94 / 207 451 (17.76) 473 (18.62) 508 (20.00) 110 / 242 229 (9.02) 94 / 207
150 (6) 17 229 (9.02) 117 / 258 451 (17.76) 473 (18.62) 508 (20.00) 133 / 293 229 (9.02) 117 / 258
200 (8) 17 243 (9.57) 175 / 385 568* (22.36*) 568 (22.36) 610 (24.02) 210 / 462 – –
200 (8) 20 243 (9.57) 200 / 440 568* (22.36*) 568 (22.36) 610 (24.02) 240 / 528 – –
250 (10) 20 297 (11.69) 230 / 506 708* (27.87*) 708 (27.87) 752 (29.61) 275 / 605 – –
250 (10) 25 297 (11.69) 290 / 638 708* (27.87*) 708 (27.87) 752 (29.61) 340 / 748 – –
DN B1J/B1JA A Kg / lbs A Kg / lbs A Kg / lbs
25 (1) 8 102 (4.02) 25 / 55 184 (7.24) 197 (7.76) 210 (8.27) 26 / 58 102 (4.02) 25 / 55
40 (1 1/2) 8 114 (4.49) 28 / 62 222 (8.74) 235 (9.25) 251 (9.88) 29 / 64 114 (4.49) 28 / 62
50 (2) 8 124 (4.88) 35 / 77 254 (10.00) 267 (10.51) 286 (11.26) 37 / 83 124 (4.88) 35 / 77
80 (3) 10 165 (6.50) 54 / 119 298 (11.73) 318 (12.52) 337 (13.27) 58 / 128 165 (6.50) 54 / 119
100 (4) 12 194 (7.64) 97 / 214 352 (13.86) 368 (14.49) 394 (15.51) 105 / 231 194 (7.64) 97 / 214
150 (6) 16 229 (9.02) 163 / 359 451 (17.76) 473 (18.62) 508 (20.00) 179 / 394 229 (9.02) 163 / 359
200 (8) 20 243 (9.57) 310 / 682 568* (22.36*) 568 (22.36) 610 (24.02) 360 / 792 – –
250 (10) 25 297 (11.69) 500 / 1100 708* (27.87*) 708 (27.87) 752 (29.61) 550 / 1210 – –
*) Class 150 face-to-face according to class 300.
HOW TO ORDER
To specify a control valve, make a selection from designation shown below. These codes create a complete valve model number. An
extensive number of options and variations are available. For options not shown, or to enter an order, contact your local Metso sales rep-
resentative.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
FC 04 D W TA S6 KB SGT D A
3. sign Pressure ratings, flanges, flange drilling 3. sign Pressure ratings, flanges, flange drilling
C ASME class 150* K PN 16*
D ASME class 300 L PN 25*
F ASME class 600 M PN 40
* For 8" and 10" flange drillings with threads N PN 63
P PN100
* For 200 mm and 250 mm flange drillings with threads.
ASME/ISA VALVES
6. sign Body Insert Bonnet Gland
S6 CF8M /1.4408 316SS / 1.4436 CF8M / 1.4408 316SS / 1.4436
J1 WCC / 1.0619 316SS / 1.4436 WCC / 1.0619 316SS / 1.4436
ACTUATORS, POSITIONERS
For Quadra-Powr® actuators see bulletin 6 QPX 20
For B-series actuators see bulletin 6 B 20
For ND-positioners see bulletin 7 ND90 21
For NE/NP-positioners see bulletin 7 NE/NP 20.
Codes for Finetrol in Nelprof control valve selection software: FI - FTO, FI - FTC, Q - FI, PQ - FI