Professional Documents
Culture Documents
▴ At a temperature of 710 K, the vapour pressure of pure liquid Zn is given by: 𝑝𝑍𝑛(𝑋𝑧𝑛 = 1.0) = 3.6
× 10−4atm. The Raoultian activity coefficient (𝛾𝑍𝑛) of Zn in Zn-Cd alloy liquid at 710 K is
0
approximated by: ln(𝛾𝑍𝑛) = 0.875(1 − 𝑋𝑍𝑛)2 . The ratio [ 𝑝𝑍𝑛(𝑋𝑧𝑛=0.7) ] / 𝑝𝑍𝑛(𝑋𝑧𝑛=1.0)for a liquid
alloy with 𝑋= 0.7 is ________. (to two decimal places).
GATE MT 2018 paper with solution gate mt previous year questions with solution
GATE MT 2018 49
enthalpy of fusion GATE MT 2018 paper with solution gate mt previous year questions with solution
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 1/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ If the net magnetic moment of an Fe atom in BCC structure is 2 𝜇𝐵, then the saturation
magnetization of Fe is ________ (kA m-1 to one decimal place). Given: 𝜇𝐵 = 9.273 × 10– 24 A
0
m2; Lattice parameter of BCC iron is 0.287 nm Note: kA is kiloAmperes.
GATE MT 2018 paper with solution gate mt previous year questions with solution
Askmemetallurgy Official ✓ Silver Asked: June 26, 2020 In: Mechanical Metallurgy
▴ A single crystal of aluminium is subjected to 10 MPa tensile stress along the [321] crystallographic
direction. The resolved shear stress on the (111̅) [101] slip system is ________(in MPa to two
0
decimal places).
GATE MT 2018 paper with solution gate mt previous year questions with solution shear stress
▴ The terminal velocity (𝑣) of a spherical inclusion of diameter D = 50 micrometers rising in liquid
steel is_______ (in mm s-1 to two decimal places). Assume Stokes law; i.e., drag force 𝐹𝑑 =
0
3𝜋𝜇𝐷𝑣, where 𝜇 is the viscosity of steel. Given: Density of liquid steel = 7900 kg m-3; Viscosity of
liquid steel = 0.0079 Pa s; Density of the inclusion = 2500 kg m-3; Acceleration due to gravity = 9.8
m s-2.
GATE MT 2018 paper with solution gate mt previous year questions with solution stokes law
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 2/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Askmemetallurgy Official ✓ Silver Asked: June 25, 2020 In: Welding Technology
▴ The temperature profile (T in Kelvin) of an arc weld across its width is given as𝑇 = 2000
exp(−0.3𝑥2) where 𝑥 (in mm) is the distance from the weld centre. The melting point of the base
0
material is 1500 K. The width of the fusion zone is _________(in mm tO two decimal places).
GATE MT 2018 paper with solution gate mt previous year questions with solution temperature pro le
▴ 0 ▾ Share
Askmemetallurgy Official ✓ Silver Asked: June 25, 2020 In: Foundry Technology
▴ As shown in schematic below, an alloy is cast as a rectangular slab between two thick mould walls
that differ in their thermal conductivities. Shrinkage defects are found at a distance L1 from Mould-
0
1 with thermal conductivity 𝑘1 and distance L2 from Mould-2 with thermal conductivity 𝑘2. If the
ratio L1:L2 = 3:2, and assuming 1-D heat transfer, the ratio (k1 ⁄𝑘2) is ________ (to two decimal
places).
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 3/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
GATE MT 2018 paper with solution gate mt previous year questions with solution thermal conductivity
▴ 0 ▾ Share
▴ What is the requirement for equilibrium at a triple junction as shown in the schematic, with
gamma12 , gamma23 and gamma13 as grain boundary tensions and teta1 , teta2 and teta3 as
0
dihedral angles?
dihedral angles GATE MT 2018 paper with solution gate mt previous year questions with solution
▴ 0 ▾ Share
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 4/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Askmemetallurgy Official ✓ Silver Asked: June 25, 2020 In: Mechanical Metallurgy
bulk modulus GATE MT 2018 paper with solution gate mt previous year questions with solution
▴ 2 ▾ Share 1 Reply
▴ The molar free energy (J mol-1) of a liquid solution of a binary A-B alloy as a function of
temperature ( T ) and composition (x, the mole fraction of B) is given by: 𝐺𝐿(𝑇, 𝑥) = (1 − 𝑥)𝐺0,𝐿 +
0
𝑥𝐺0,𝐿 + 𝑅𝑇[𝑥 ln 𝑥 + (1 − 𝑥) ln(1 − 𝑥)] + 4000𝑥(1 − 𝑥). where 𝐺0,𝐿 and 𝐺0,𝐿 are the molar free
energies of pure liquid A and pure liquid B. What is the excess molar free energy, 𝐺𝑋𝑆,𝐿, for an
alloy with 𝑥 = 0.5 at 𝑇 = 1000 K? Given: Gas constant R = 8.314 J K-1 mol-1 (A) 1000 J mol-1
(B) – 2000 J ... Read More
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 5/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
GATE MT 2018 paper with solution gate mt previous year questions with solution molar free energy
▴ 0 ▾ Share
▴ If 2 moles of Au and 3 moles of Ag are mixed to form a single-phase ideal solid solution, the total
entropy of mixing is _____(on J K–1 to one decimal place ) Given: Gas constant R = 8.314 J K-1
0
mol-1
entropy GATE MT 2018 paper with solution gate mt previous year questions with solution
▴ For the reaction: 4Ag(s, pure) + O2(g) ⟶ 2Ag2O(s, pure), the standard enthalpy change, ∆𝐻0 = −
61080 J, and the standard entropy change, ∆𝑆0 = − 132.22 J K−1, in the temperature range from
0
298 K to 500 K. The temperature above which Ag2O decomposes in an atmosphere containing
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 6/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
oxygen at a partial pressure 𝑝𝑂2 = 0.3 atm is (in K to one decimal place). Given: Gas
constant R = 8.314 J K-1 mol-1
GATE MT 2018 paper with solution gate mt previous year questions with solution standard enthalpy
standard entropy
▴ For a single phase system with K components, the exact differential of Gibbs free energy is given
as : Which one of the following can be derived from the above expression as a Maxwell’s relation?
0
GATE MT 2018 paper with solution gate mt previous year questions with solution Maxwell’s relation
▴ 0 ▾ Share
▴ A continuous and aligned carbon-fiber composite consists of 25 vol. % of fibers in an epoxy matrix.
The Young’s modulus of fiber and matrix, respectively are 𝐸𝑓 = 250 GPa and 𝐸𝑚 = 2.5 GPa. If the
0
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 7/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
composite is subjected to longitudinal loading (iso-strain condition and assuming elastic response),
the fraction of load borne by the reinforcement is (to two decimal places).
carbon- ber composite GATE MT 2018 paper with solution gate mt previous year questions with solution
▴
0
(A) P
(B) Q
(C) R
(D) S
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 8/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Submit Results
▴ 1 ▾ Share
▴ Pure iron transforms from body centered cubic (BCC) to face centered cubic (FCC) crystal
structure at 912 °C. If the lattice parameter of the BCC phase is 0.293 nm and that of the FCC
0
phase is 0.363 nm, the associated volume change is ______ (in % to one decimal place).
crystal structure GATE MT 2018 paper with solution gate mt previous year questions with solution
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 9/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ 0 ▾ Share 1 Reply
▴ If the solid-liquid interfacial energy increases by 10%, the energy barrier for homogeneous
nucleation of a spherical solid from the liquid, will change by: (A) 21% (B)
0
33% (C) -10% (D) 46%
GATE MT 2018 paper with solution gate mt previous year questions with solution
Using formula deltaG* = 16/3 * π * Ys3 /delta Gv2 from this delta G* is directly
proportional to Ys3 So forming two equations delta G* = kYs3 and delta G*' = k (Ys
+ 10/100Ys)3 = k (1.1Ys)3 = k 1.33Ys3 Percentage change = (delta G*' - delta G*)/
delta G* × 100 = 33% (B)
▴ 0 ▾ Share 1 Reply
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 10/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴
0
Submit Results
GATE MT 2018 paper with solution gate mt previous year questions with solution manufacturing processes
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 11/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ 0 ▾ Share
Askmemetallurgy Official ✓ Silver Asked: June 23, 2020 In: Extractive Metallurgy Poll
▴
0
Submit Results
extractive process GATE MT 2018 paper with solution gate mt previous year questions with solution
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 12/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ 0 ▾ Share
▴
0
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 13/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Submit Results
GATE MT 2018 paper with solution gate mt previous year questions with solution tensile stress-strain curves
Correct answer is option C. Mild steel (low carbon steel) has serrations and can be
represented as curve P as shown in gure. In high purity copper, there are no
serrations due to the absence of dislocations. This is represented in Curve Q. Soda
lime glass is brittle and its curve is a linear line Read More
▴ 0 ▾ Share
Askmemetallurgy Official ✓ Silver Asked: June 22, 2020 In: Extractive Metallurgy
▴ What is the voltage required to electrolytically refine impure copper of activity 𝑎𝐶𝑢 = 0.9 (Raoultian
standard state) to pure copper at 300 K? Given: Gas constant R = 8.314 J mol– 1 K– 1, and
0
Faraday’s constant F = 96500 C mol -1. (A) 1.36 mV (B) 2.72 mV (C) 0
mV (D) 5.44 mV
copper GATE MT 2018 paper with solution gate mt previous year questions with solution
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 14/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Askmemetallurgy Official ✓ Silver Asked: June 22, 2020 In: Iron & Steel Making
▴ Fe is produced in a reactor using pure Fe2O3, C and O2. For every mole of Fe produced, 2.38
moles of C is used. The exit gas from the reactor contains CO and CO2 in the molar ratio of 1:1.
0
How many moles of O2 is consumed for every mole of Fe produced? (A) 1.035 (B)
2.072 (C) 0.513 (D) 4.147
exit gas GATE MT 2018 paper with solution gate mt previous year questions with solution
▴
0 ❓ Participate in Poll, Choose Your Answer.
Submit Results
elastic modulus GATE MT 2018 paper with solution gate mt previous year questions with solution
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 15/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴
0 ❓ Participate in Poll, Choose Your Answer.
(A)Both [A] and [R] are true and [R] is the correct reason for [A]
(B)Both [A] and [R] are true, but [R] is not the correct reason for [A]
Submit Results
bcc fcc GATE MT 2018 paper with solution gate mt previous year questions with solution
Correct option is D Assertion: It's true as BCC is less ductile than FCC. The reason
lies behind the e ective slip occuring in the crystals. The BCC has 48 slip system
and FCC has only 12. Also, we know that slip or Dislocation motion always occurs in
speci ed slip systems and more no of system me Read More
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 16/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ 1 ▾ Share
Askmemetallurgy Official ✓ Silver Asked: June 22, 2020 In: Mechanical Metallurgy Poll
▴
0 ❓ Participate in Poll, Choose Your Answer.
(A)Both [A] and [R] are true and [R] is the correct reason for [A]
(B)Both [A] and [R] are true, but [R] is not the correct reason for [A]
Submit Results
coble creep GATE MT 2018 paper with solution gate mt previous year questions with solution
Correct option- B Assertion: It's true as the Coble creep rate is inversely
proportional to cube of the grain size. The Coble creep is more active at lower
temperatures when self di usion is di cult to occur. At this time, the grain
boundary controls the di usion rate as the grain boundaries are Read More
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 17/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ 2 ▾ Share 1 Reply
GATE MT 2018 paper with solution gate mt previous year questions with solution isothermal treatment
Askmemetallurgy Official ✓ Silver Asked: June 21, 2020 In: Metal Working
▴ A plate of thickness h = 120 mm is cold rolled in a mill with a roll diameter of 200 mm. If the
coefficient of friction µ is 0.1, the maximum possible reduction Δh in a single pass
0
is____________. (in mm to one decimal place)
cold rolled GATE MT 2018 paper with solution gate mt previous year questions with solution
▴ In the A-rich end of the A-B binary eutectic phase diagram (shown below), the solidus and liquidus
are straight lines. The freezing range of the alloy with 16% B is _____________. (in oC to one
0
decimal place)
▴
0 ❓ Participate in Poll, Choose Your Answer.
(A) Martempering
(B) Ausforming
(D) Normalizing
Submit Results
GATE MT 2018 paper with solution gate mt previous year questions with solution ttt curve
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 19/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Considering TTT diagram since plastic work is done for accumulation of dislocations
which increases the strength by forming jog and kink so this process is called
ausforming (option -B).
▴ 1 ▾ Share 1 Reply
Askmemetallurgy Official ✓ Silver Asked: June 21, 2020 In: Testing Of Material Poll
▴
0 ❓ Participate in Poll, Choose Your Answer.
Submit Results
GATE MT 2018 paper with solution gate mt previous year questions with solution non-destructive techniques
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 20/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ 1 ▾ Share 1 Reply
Askmemetallurgy Official ✓ Silver Asked: June 20, 2020 In: Testing Of Material
▴ In a powder diffraction experiment on BCC iron, the first peak occurs at 2𝜃 = 68.7°. The
wavelength of X-rays is (in nm to three decimal places). Given: The lattice parameter of iron =
0
0.287 nm.
GATE MT 2018 paper with solution gate mt previous year questions with solution x-rays
▴ A 1 mol piece of copper at 400 K is brought in contact with another 1 mol piece of copper at 300 K,
and allowed to reach thermal equilibrium. The entropy change for this process is________ (in J
0
K-1 to three decimal places). Given: Specific heat capacity of copper (between 250 K and 500 K)
is 22.6 J K-1mol-1. Assume that the system containing the two pieces of copper remains isolated
during this process.
GATE MT 2018 paper with solution gate mt previous year questions with solution Speci c heat capacity
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 21/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴
0 ❓ Participate in Poll, Choose Your Answer.
Submit Results
GATE MT 2018 paper with solution gate mt previous year questions with solution jominy end-quench test
▴ 1 ▾ Share 1 Reply
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 22/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Askmemetallurgy Official ✓ Silver Asked: June 20, 2020 In: Foundry Technology Poll
▴
0 ❓ Participate in Poll, Choose Your Answer.
Submit Results
casting GATE MT 2018 paper with solution gate mt previous year questions with solution
Option c is correct because surface roughness values have been taken forom
literature Investment Casting - 3.2 micrometer Permanent Casting - 3.6 micrometer
Pressure Die Casting - 1.6 micrometer Sand Casting - 25 micrometer
▴ 1 ▾ Share 1 Reply
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 23/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Askmemetallurgy Official ✓ Silver Asked: June 20, 2020 In: Welding Technology Poll
▴
0 ❓ Participate in Poll, Choose Your Answer.
(A)Epoxy resins
Submit Results
brazing GATE MT 2018 paper with solution gate mt previous year questions with solution
For brazing, the ller material should have lower melting point and low surface
tension which is satis ed by near eutectic alloys (option B).
▴ 1 ▾ Share 1 Reply
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 24/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Askmemetallurgy Official ✓ Silver Asked: June 19, 2020 In: Mechanical Metallurgy
▴ The ideal plastic work involved in extruding a cylindrical billet of length 100 mm, from an initial
diameter of 20 mm to a final diameter of 16 mm is _______ (in J to one decimal place). The flow
0
stress in compression is 40 MPa, and remains constant throughout the process.
ow stress GATE MT 2018 paper with solution gate mt previous year questions with solution
▴ 1 ▾ Share 1 Reply
Askmemetallurgy Official ✓ Silver Asked: June 19, 2020 In: Welding Technology Poll
▴
0 ❓ Participate in Poll, Choose Your Answer.
Submit Results
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 25/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
GATE MT 2018 paper with solution gate mt previous year questions with solution welding processes
Deposition rate is very high in electro slag welding and that too very di cult to hold
the push with thin plates It is usually used for high deposition rate joints and also
economical...
▴ 0 ▾ Share
Askmemetallurgy Official ✓ Silver Asked: June 19, 2020 In: Iron & Steel Making Poll
▴
0 ❓ Participate in Poll, Choose Your Answer.
Al203
Fe203
Si02
Mg0
Submit Results
GATE MT 2018 paper with solution gate mt previous year questions with solution steel making
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 26/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
In addition to basicity, MgO content of the slag is also important. The slag contains
dissolved calcium compounds and acidic compounds that cause MgO to dissolve
from the refractory bricks of the lining into the slag. MgO dissolves into the slag
based on relationships of FeO content, basicity and te Read More
▴ 1 ▾ Share
▴ For intrinsic Si at room temperature, the electron concentration = the hole concentration = 1 ×
1016m−3, and the electron and hole mobilities are 0.1 and 0.2 m2. V−1. s−1 respectively. What is
0
the room temperature electrical conductivity? The charge of an electron is 1.6 × 10−19C. (A) 0
(W.m)– 1 (B) 1.6 × 10 – 4 (W.m)– 1 (C) 3.2 × 10 – 4 (W.m)–
1 (D) 4.8 × 10 – 4 (W.m)– 1
electrical conductivity GATE MT 2018 paper with solution gate mt previous year questions with solution
σ = ne e (μe + μp ) since ne = np Putting all the values σ = 1016 × 1.6 × 10-19 (0.1 +
0.2) σ = 4.8 × 10-4 (W.m)-1 (d)
▴ 1 ▾ Share 1 Reply
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 27/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴
0 ❓ Participate in Poll, Choose Your Answer.
Submit Results
constant pressure GATE MT 2018 paper with solution gate mt previous year questions with solution
▴ 0 ▾ Share
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 28/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ The c/a ratio of Zn (hcp) is 1.856. Slip at room temperature occurs most easily on which of the
following slip systems in Zn: Note: In hcp metals, the ideal c/a ratio is 1.633. (A) {11̅00}
0
〈112̅0〉 (B) {11̅00} 〈0002〉 (C) {0001}
〈112̅0〉 (D) {101̅1̅} 〈112̅3〉
GATE MT 2018 paper with solution gate mt previous year questions with solution slip systems
The c/a ratio is greater than the ideal ratio of 1.633 hence, the slip should occur on
the basal plane that is {0001} Option C
▴ 0 ▾ Share 1 Reply
▴
0 ❓ Participate in Poll, Choose Your Answer.
(A) P & Q
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 29/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
(B) Q & R
(C) Q & S
(D) P & R
Submit Results
corrosion GATE MT 2018 paper with solution gate mt previous year questions with solution
Correct answer is option D. Passive lm materials are stainless steels (Cr2O3) and
Aluminium alloys ( Al2O3).
▴ 0 ▾ Share
Askmemetallurgy Official ✓ Silver Asked: June 18, 2020 In: Powder Metallurgy Poll
▴
0 ❓ Participate in Poll, Choose Your Answer.
(A) P & Q
(B) Q & R
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 30/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
(C) Q & S
(D) P & S
Submit Results
GATE MT 2018 paper with solution gate mt previous year questions with solution powder metallurgy
▴ 0 ▾ Share
Askmemetallurgy Official ✓ Silver Asked: June 18, 2020 In: Metal Working Poll
▴
0
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 31/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Submit Results
GATE MT 2018 paper with solution gate mt previous year questions with solution upset forging
Askmemetallurgy Official ✓ Silver Asked: June 18, 2020 In: Iron & Steel Making
▴ During decarburization in a steel bath at 1550 oC, the compositions of dissolved C (wt.%C) and
dissolved O (wt.%O) follow the relation: (wt.%C)(wt.%O) = K. When the partial pressure of CO
0
(𝑝𝐶𝑂) is 1 atm, K = 0.002. If 𝑝𝐶𝑂 = 0.1 atm, what is the value of K, at the same temperature? Note:
Assume Henry’s law is applicable. (A) 0.06 (B) 0.002 (C)
0.02 (D) 0.0002
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 32/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
GATE MT 2018 paper with solution gate mt previous year questions with solution henry’s law
Correct answer is option D. Henry's law : pCO= K[O][C] There are two cases for this
question. Case 1: pCO= 1 ; K=0.002 [C][O]= 1/0.002 Case 2: pCO= 0.1 and K=? K=
pCO/[C][O]= 0.1×0.002 K=0.0002
▴ 0 ▾ Share
Askmemetallurgy Official ✓ Silver Asked: June 17, 2020 In: Iron & Steel Making Poll
▴
0 ❓ Participate in Poll, Choose Your Answer.
(A) BOF-BF-LF-RH
(B) BF-LF-BOF-RH
(C) RH-LF-BF-BOF
(D) BF-BOF-LF-RH
Submit Results
GATE MT 2018 paper with solution gate mt previous year questions with solution integrated steel plant
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 33/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
Answer: D Part Pig iron (BF)- Steel Production (BOF) -Ladle furnace for heating
purpose (LF)-Degassing in secondary steel Making (RH or DH).
▴ 1 ▾ Share 1 Reply
Askmemetallurgy Official ✓ Silver Asked: June 17, 2020 In: Extractive Metallurgy Poll
▴
1 ❓ Participate in Poll, Choose Your Answer.
Submit Results
froth otation GATE MT 2018 paper with solution gate mt previous year questions with solution
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 34/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ 0 ▾ Share
▴ Analysis of a flow phenomenon in a system requires the following variables: Pressure [M L-1 T -2]
Velocity of the fluid [L T -1] Size of the system [L] Density of the fluid [M L-3] Viscosity of the fluid
0
[M L-1 T -1] According to Buckingham Pi theorem (dimensional analysis) what is the number of
independent DIMENSIONLESS variables needed to describe this system? (A) 2
(B) 3 (C) 4 (D) 5
Buckingham Pi theorem GATE MT 2018 paper with solution gate mt previous year questions with solution
▴ 0 ▾ Share
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 35/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴
0 ❓ Participate in Poll, Choose Your Answer.
A. (SiO4) 4-
B. (Si2O7) 6-
C. (Si3O10) 8-
D. (Si4O14) 10-
Submit Results
2cao.sio2 GATE MT 2018 paper with solution gate mt previous year questions with solution
▴ 0 ▾ Share
GATE MT 2018 Q1
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 36/37
7/13/2020 PrintWhatYouLike on GATE MT 2018 paper with solution - Askmemetallurgy
▴ For a laminar flow of a liquid metal over a flat plate, the thicknesses of the velocity and thermal
boundary layers are 𝛿𝑣 and 𝛿𝑡 respectively. Kinematic viscosity (viscosity/density) of liquid metal is
0
significantly lower than its thermal diffusivity[thermal conductivity / (density × specific heat)]. Based
on this information, pick the correct option. (Note: The temperature of the liquid metal is different
from that of the plate). (A) 𝛿𝑣 < 𝛿𝑡 (B) 𝛿𝑣 > 𝛿𝑡 (C) 𝛿𝑣 =
𝛿𝑡 (D) Information insufficient
GATE MT 2018 paper with solution gate mt previous year questions with solution laminar velocity
Correct answer is option B. Prantle number (Pr) gives relation between thermal
boundary layer and velocity boundary layer. Pr= v/α, where v= kinetic viscosity and
α= thermal di usivity As per question, v<α which means Pr<1 δt= thermal
boundary layer; δv= velocity boundary layer From the Read More
▴ 0 ▾ Share 1 Reply
https://www.printwhatyoulike.com/print?url=https%3A%2F%2Faskmemetallurgy.com%2Fqna%2Fquestion-tag%2Fgate-mt-2018-paper-with-solution… 37/37