Professional Documents
Culture Documents
org
REFERENCE
GUIDE
Here you'll find all of the keyboard shortcuts for SketchUp
summarized in one sheet so you don’t miss any. I recommend
printing this and keeping it on hand so you can learn the
shortcuts for the most common tools.
Additional Resources – Alejandro Soriano domestika.org
Move (M) Option Moves a copy Scale (S) Option Keep pressed down to modify the scale from the center
Shift Keep pressed down to lock in the direction of current inference Shift Keep pressed down to uniformly modify the scale (without distortion)
Command Autofold (allows the movement even if additional edges and faces must be added) Quantity Specifies a scale factor: enter a number and hit Enter, e.g., 1.5 = 150%
Arrows Locks the direction; up = blue, right = red, left = green, and down = parallel/perpendicular Length Specifies a length factor: enter a number, a unit, and hit Enter, e.g., 10m
Distance Specifies the distance of the movement: enter a number and hit Enter Select (space bar) Option Adds to the selection
External serial copy n copies in a row: move the first copy, enter a number followed by X, and hit Enter Shift Adds to/eliminates from the selection
Internal serial copy n copies in between: move the first copy, enter a number followed by /, and hit Enter Option + Shift Eliminates from the selection
Offset (F) Command Allows the results to be superimposed Tape Option Activates the creation of guides or the measurement-only mode
Distance Specifies an offset distance: enter a number and hit Enter Measure Arrows Locks the direction; up = blue, right = red, left = green, and down = parallel/perpendicular Cº
(T)
Orbit (O) Option Keep pressed down to deactivate the gravitationally Change size Changes the size of the model: measure a distance, enter the desired size, and hit Enter
Shift weighted orbit Keep pressed down to activate the Move tool Zoom (Z) Shift Keep pressed down and click-drag the mouse to change the field of view
Additional Resources – Alejandro Soriano domestika.org
Move (M) Ctrl Moves a copy Scale (S) Ctrl Keep pressed down to modify the scale from the center
Shift Keep pressed down to lock in the direction of current inference Shift Keep pressed down to uniformly modify the scale (without distortion)
Alt Autofold (allows the movement even if additional edges and faces must be added) Quantity Specifies a scale factor: enter a number and hit Enter, e.g., 1.5 = 150%
Arrows Locks the direction; up = blue, right = red, left = green, and down = parallel/perpendicular Length Specifies a length factor: enter a number, a unit, and hit Enter, e.g., 10m
Distance Specifies the distance of the movement: enter a number and hit Enter Select (space bar) Ctrl Adds to the selection
External serial copy n copies in a row: move the first copy, enter a number followed by X, and hit Enter Shift Adds to/eliminates from the selection
Internal serial copy n copies in between: move the first copy, enter a number followed by /, and hit Enter Ctrl + Shift Eliminates from the selection
Offset (F) Alt Allows the results to be superimposed Tape Ctrl Activates the creation of guides or the measurement-only mode
Distance Specifies an offset distance: enter a number and hit Enter Measure Arrows Locks the direction; up = blue, right = red, left = green, and down = parallel/perpendicular Cº
(T)
Orbit (O) Ctrl Keep pressed down to deactivate the gravitationally Change size Changes the size of the model: measure a distance, enter the desired size, and hit Enter
Shift weighted orbit Keep pressed down to activate the Move tool Zoom (Z) Shift Keep pressed down and click-drag the mouse to change the field of view