FACULTY OF ENGINEERING TECHNOLOGY

DEPARTMENT OF CIVIL ENGINEERING TECHNOLOGY

ASSIGNMENT INSTRUCTION SHEET
ASSIGNMENT TITLE:
ASSIGNMENT 5: AUTOCAD SETUP FOR FLOOR PLAN DRAFTING
PROGRAMME : BACHELOR OF CIVIL ENGINEERING TECHNOLOGY (CONSTRUCTION)
SEMESTER / SESSION : Semester 2 (2019/2020)
COURSE CODE & NAME : PAT154: Construction Drawing
NAME(S) OF ACADEMIC 1. Ts Dr Fazdliel Aswad bin Ibrahim (Course Coordinator)
STAFF 2. Ahmad Faizal bin Mansor
ASSIGNMENT AIM(S) 1. To expose students on preparing title block
2.
3.
ASSIGNMENT INSTRUCTION:

1. Students will be guided by instructor in preparing the standard title block for construction drawing set.
2. Students need to prepare the tittle block as instructed in Appendix 5.1
3. Students need to use the previous AutoCAD file that has been prepared during studio session 4.
4. Students need to record the screen while preparing the setting up of AutoCAD by using any relevant software (for
example free cam studio).
5. Students need to save the files as follows:
5.1. AutoCAD file: PAT154 (1920) Student Name – Session 2
5.2. Recorded screen file: PAT154 (1920) Student Name – Session 2
6. Students need to save the AutoCAD in the version of 2013.
7. Students need to upload the files in 5.1 and 5.2 via Google Form: https://forms.gle/rkF8EkWK6wg46vgZA
8. Students need to complete all tasks given and then upload the files within the allocated time.

ASSIGNMENT DURATION:
Short Semester Week 3 (1 week).

ASSIGNMENT EXECUTION:
It is recommended that the execution of the assignment is as the following:

Activities Week (W)

1. Preparing title block Short Sem W3

ASSIGNMENT SUBMISSION DATE:

Short Semester Week 3 (during studio session)

ASSIGNMENT NECESSITY:
1. Set of Architectural Drawing
2. Set of Civil and Structural Drawing
3. Laptop / Desktop
4. AutoCAD software (version 2015 or advance)

ASSESSMENT:
ASSIGNMENT (CAD DRAFTING) – 30%
AutoCAD Setup: 15%
AutoCAD Drafting: 15%

RUBRIC OF ASSESSMENT:
Please refer to Appendix A2

Prepared by:
Dr. Fazdliel Aswad bin Ibrahim