Professional Documents
Culture Documents
PC228US-3
PC228USLC-3 PC
228
Hydraulic Excavator
PC228US/LC-3
2
PC228US-3
Working in congested or confined areas can be a challenge.
Komatsu’s PC228US-3 Series Hydraulic Excavators have a
short tail swing profile, designed specifically for work in confined
areas. By reducing tail swing, the PC228US-3 can work in areas where
conventional profile excavators would pose a safety risk. Perfect for work
on roadways, bridge work, urban areas, or anywhere space is limited,
the PC228US-3 provides you with performance and productivity you
expect from Komatsu equipment.
3
PC228US-3 HYDRAULIC EXCAVATOR
WALK-AROUND
New features:
• Sliding convex door.
• Cup holder.
• Internal storage with hot and cold box.
• Lightweight aluminum framed front window.
• Large capacity air conditioner.
• Sliding window.
• Pressurized cabin (3 mm Aq).
• Electronic boom raise cushion.
Larger cab
• Komatsu’s low noise design cab is a fully pressed
high-rigidity cab using viscous cab mounting for
reduced noise.
• Sliding convex door facilitates easy entrance in
confined areas and reduces the danger of being
damaged on roadways because the door does
not protrude when open.
• Komatsu’s large cab meets ISO working space
standards to provide secure, safe, and comfort-
able operation.
High mobility
Large drawbar pull and steering force display its
ability when operating on a slope.
4
HYDRAULIC EXCAVATOR
PC228US-3
NET HORSEPOWER
107 kW 143 HP
OPERATING WEIGHT
21.980 - 23.900 kg
Advanced monitor features
Four working modes designed to match BUCKET CAPACITY
0,48 - 1,68 m³
engine speed, pump speed and system
pressure.
• Active mode for maximum production/
power and fast cycle times.
• Breaker operations for optimum engine
rpm, hydraulic flow, and pressure.
• Economy mode for lower fuel con-
sumption and noise.
• Lifting mode for lifting by raising the
hydraulic pression by 7%
High stability
The PC228US-3 offers exceptional lifting capacity
and high stability with a large counterweight that
requires no additional clearance.
Moreover the PC228US-3 has a high dynamic
stability with the automatic electronic boom raise
cushion. This will slow down the boom when it is
raised to decrease the shock.
Safe operation
The PC228US-3’s round form reduces the op-
erator’s need to constantly check behind him for
movement, as he would with a conventional profile
machine.
5
PC228US-3 HYDRAULIC EXCAVATOR
EMMS
EMMS (Equipment Management and Monitoring System)
The EMMS is a highly sophisticated system, controlling and monitoring all the excava-
tor functions. The user interface is highly intuitive and provides the operator with easy
access to a huge range of functions and operating information.
On-screen symbols
1 Operating mode
2 Service hours meter
3 Travel speed
4 Engine water gauge
5 Engine water temperature warning
6 Hydraulic oil gauge
7 Hydraulic oil temperature warning
8 Fuel level gauge
9 Fuel low level warning
10 Swing lock
11 Pre-heat
12 Continuous/intermittent window wiper
13 Auto deceleration
14 PowerMax
6
HYDRAULIC EXCAVATOR
PC228US-3
Password screen
7
PC228US-3 HYDRAULIC EXCAVATOR
PRODUCTIVITY FEATURES
Safe operation with small 180° swing width: 3,99 m
Excellent productivity
Engine
The PC228US-3 gets its exceptional power and work capacity from the Ko-
matsu SAA6D102E engine. Output is 107 kW (143 HP), giving you increased
hydraulic power while improving fuel efficiency. The engine meets emissions
regulations, including CARB, EPA, EC, and noise levels have been reduced
for greater operator comfort.
PC228US-3 PC210LC-7
Bucket digging force (ISO) 15.200 kg 15.200 kg
Arm crowd force (ISO) 11.000 kg 11.000 kg
PowerMax function
This function temporarily increases digging force for added power in tough
situations.
High stability
The PC228US-3 offers exceptional lifting capacity and high stability with
a large counterweight that requires no additional clearance. Moreover the
PC228US-3 has a high dynamic stability with the automatic electronic boom
raise cushion. This will slowdown the boom when it is raised to decrease the
shock.
PC228US/LC-3
Weight of counterweight 6.335 kg
9
PC228US-3 HYDRAULIC EXCAVATOR
WORKING ENVIRONMENT
The PC228US-3 cab interior is
spacious and provides a com-
fortable working environment…
Operator’s Cab
Multi-position controls
The multi-position, pressure proportional control levers
allow the operator to work in comfort while maintaining
precise control. A double-slide mechanism allows the
seat and controllers to move together or independently,
allowing the operator to position the controllers for maxi-
mum productivity and comfort.
Cab mount
The cab rests on viscous damping mounts to reduce
vibration and noise from the machine body. Operator
fatigue is reduced.
Noise
Komatsu’s low noise design cab is a fully pressed
high-rigidity cab LpA operator noise level: 73 dB(A)
using viscous cab LwA external noise level: 102 dB(A)
mounting for reduced noise.
Washable floor
The PC228US-3’s floor is easy to keep clean. The gently
inclined surface has a flanged floormat and drainage
10 holes to facilitate runoff.
HYDRAULIC EXCAVATOR
PC228US-3
11
PC228US-3 HYDRAULIC EXCAVATOR
MAINTENANCE FEATURES
Easy maintenance
Komatsu designed the PC228US-3 to have easy service access. By doing so, routine maintenance and servicing
are less likely to be skipped, which can mean a reduction in costly downtime later on. Here are some of the many
service features found on the PC228US-3:
Sound Sound
suppression suppression
cover material
Large size
swing motor
12
HYDRAULIC EXCAVATOR
PC228US-3
PC228US-3 PC228US-2
Greasing Bucket parts 250 h* 100 h
Other work equipment parts 250 h 100 h
Consumable parts Engine oil 500 h 250 h
Engine oil filter element 500 h 250 h
Hydraulic oil 5.000 h 5.000 h
Hydraulic oil filter element 1.000 h 500 h
Fuel filter 500 h 500 h
* Armtop only
Steel bushing to high tension brass bushing
(100 h) (250 h)
Safety features
Large handrail is installed for getting on/off Steps with no-skid sheet provide anti-slip foot-
machine safely ing for maintenance
13
PC228US-3 HYDRAULIC EXCAVATOR
SPECIFICATIONS
ENGINE SWING SYSTEM
Operating weight, including 5.700 mm one piece boom, two piece boom, 2.925 mm arm, SAE heaped 0,78 m³ backhoe bucket, operator,
lubricant, coolant, full fuel tank, and the standard equipment.
MONO BOOM TWO PIECE BOOM
PC228US-3 PC228USLC-3 PC228USLC-3
Operating Ground Operating Ground Operating Ground
Triple grouser shoes
weight pressure weight pressure weight pressure
600 mm 21.500 kg 0,51 kg/cm² 22.605 kg 0,47 kg/cm² 23.600 kg 0,49 kg/cm²
700 mm – – 22.900 kg 0,41 kg/cm² 23.850 kg 0,43 kg/cm²
14
HYDRAULIC EXCAVATOR
PC228US-3
DIMENSIONS
MONO BOOM
15
PC228US-3 HYDRAULIC EXCAVATOR
WORKING RANGE
MONO BOOM
H
(m)
12
11
10
9
8
7
6
5
A
4
B
3
2
1
0 G.L.
-1
-2
-3
C E D
-4
-5
-6
-7
11 10 9 8 7 6 5 4 3 2 1 0
(m) 2440mm
G
F
ARM LENGTH 2.925 mm
A Max. digging height 10.700 mm
B Max. dumping height 7.825 mm
C Max. digging depth 6.620 mm
D Max. vertical wall digging depth 5.980 mm
E Max. digging depth of cut for 2,44 m level 6.370 mm
F Max. digging reach 9.875 mm
G Max. digging reach at ground level 9.700 mm
H Min. swing radius 2.310 mm
16
HYDRAULIC EXCAVATOR
PC228US-3
17
PC228US-3 HYDRAULIC EXCAVATOR
LIFTING CAPACITY
MONO BOOM
Arm length
B
18
HYDRAULIC EXCAVATOR
PC228US-3
Arm length
B
PC228USLC-3 6,0 m kg *2.900 2.500 *4.200 2.900 *4.250 4.250 *4.400 *4.400
4,5 m kg *2.850 2.100 *4.450 2.850 *4.850 4.300 *5.660 *5.650 *7.200 *7.200
3,0 m kg *2.950 1.900 4.750 2.700 *5.750 4.050 *7.450 6.500
1,5 m kg *3.200 1.800 4.600 2.550 6.600 3.750 *9.250 5.850
2.925 mm 0m kg 3.400 1.850 4.550 2.450 6.350 3.550 10.300 5.500 *6.450 *6.450
625 kg -1,5 m kg 3.700 2.000 4.400 2.400 6.250 3.450 10.150 5.350 *9.950 *9.950
0,78 m³ -3,0 m kg 4.450 2.450 6.250 3.450 10.200 5.450
700 mm shoes -4,5 m kg
PC228USLC-3 6,0 m kg *2.900 2.450 *4.200 2.850 *4.250 *4.250 *4.400 *4.400
4,5 m kg *2.850 2.050 *4.450 2.800 *4.850 4.250 *5.650 *5.650 *7.200 *7.200
3,0 m kg *2.950 1.850 4.650 2.650 *5.750 4.000 *7.450 6.400
1,5 m kg *3.200 1.750 4.500 2.550 6.500 3.700 *9.250 5.800
2.925 mm 0m kg 3.350 1.800 4.400 2.400 6.250 3.450 10.150 5.400 *6.450 *6.450
625 kg -1,5 m kg 3.650 2.000 4.300 2.350 6.150 3.350 10.000 5.300 *9.950 *9.950
0,78 m³ -3,0 m kg 4.350 2.400 6.200 3.400 10.050 5.350
600 mm shoes -4,5 m kg
PC228US-3 6,0 m kg *2.900 2.050 3.900 2.450 *4.250 3.850 *4.400 *4.400
4,5 m kg *2.850 1.700 3.850 2.350 *4.850 3.700 *5.650 *5.650 *7.200 *7.200
3,0 m kg 2.650 1.500 3.700 2.250 5.450 3.400 *7.450 5.500
1,5 m kg 2.550 1.450 3.550 2.100 5.150 3.100 8.250 4.900
2.925 mm 0m kg 2.600 1.450 3.450 2.000 4.900 2.900 7.850 4.550 *6.450 *6.450
625 kg -1,5 m kg 2.850 1.600 3.400 1.950 4.800 2.800 7.700 4.400 *9.950 8.750
0,78 m³ -3,0 m kg 3.400 1.950 3.400 2.000 4.800 2.800 7.750 4.450
600 mm shoes -4,5 m kg
19
PC228US-3
HYDRAULIC EXCAVATOR
STANDARD EQUIPMENT
• Air cleaner, double element • Cab which includes: antenna, • Instrument panel • Multifunction colour monitor
with auto dust evacuation floormat, intermittent wiper and • Light, one front with equipment management
• Air conditioner/heater washer, large ceiling hatch, • Pump/engine room partition monitoring system (EMMS)
• Alternator 60 A pull-up front window, openable cover
• Arm: 2.925 mm HCU assembly rear window, removable lower • Standard shoes:
includes piping for one windshield, sliding seat, tinted 600 mm triple grouser shoes
additional function safety glass (PC228US/LC)
• Boom holding valve • Cooling fan, mixed flow with fan • Starting motor 5,5 kW
• Hydraulic control unit: guard • Track guiding guards
1 additional actuator, • Counterweight 6.335 kg • Turbocharger exhaust manifold
2 additional actuator prep. • Dustproof net for radiator and cover
• Batteries 110 Ah/2 × 12 V oil cooler • Cabin fully sealed
OPTIONAL EQUIPMENT
• Shoes: • Front window guard (half)
600 mm triple grouser shoes • Mono boom
700 mm triple grouser shoes • Two piece boom
800 mm triple grouser shoes
Komatsu Europe
International NV
Mechelsesteenweg 586
B-1800 VILVOORDE (BELGIUM)
Tel. +32-2-255 24 11
Fax +32-2-252 19 81
www.komatsueurope.com
UESS005303 01/2006 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
Printed in Europe – This specification sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.