Professional Documents
Culture Documents
8. Horn volume switching function check Operation speed for each cylinder
4.
(separate sheet)
9. Travel alarm function check (as
5. Swing speed (separate sheet) required)
10. Power-cut delay function
Swing brake performance
11. Accessory operation check 6.
(separate sheet)
① Radio ② Air conditioner 7. Swing status and noise
③ Wiper ④ Horn 8. Travel speed (separate sheet)
⑤ Working light ⑥ Room lamp 9. Turn
1 RST-08-01-001EN
1
New Machine Performance Judgment Table
Performance Measurement Entry Table
Measurement date
Model name: Serial No. Measurer
Date
Hour meter: Attachment Arm m3Bucket Remarks
Idling rotation min-1
1 Engine speed
No-load maximum speed min-1
Relief name Operation Measurement pressure
Standard MPa
Check the pressure at Main relief
Pressure
each section MPa
boost
2 (and measure as nec-
essary). Left and
Swing relief MPa
right
Pilot relief ― MPa
For the measurement and adjustment methods, see the hydraulic measurement adjustment procedures.
Boom cylinder mm
Natural fall distance Arm cylinder mm
3 for each cylinder
(in 10 min.) Bucket cylinder (open) mm
Overall (for 10 min.) mm
1 rotations 2 rotations 3 rotations Total Average
Up
Boom
Down
Operating speed for
4 each cylinder Open
(sec.) Arm
Close
Open
Bucket
Close
1 rotations 2 rotations 3 rotations Total Average
Swing speed
5 Left swing
(sec./rotation)
Right swing
1 rotations 2 rotations 3 rotations Total Average
6 Swing 180° neutral brake flow angle (degrees)
RST-08-01-001EN 2
2