Professional Documents
Culture Documents
* Required
If the smallest division on main circular scale of bevel protractor is 1 degree 1 point
and total number of divisions on vernier scale are 12. then the least count
of the said instrument will be
0.0833 minutes
60 minutes
5 degrees
5 minutes
Enrollment number *
Your answer
Calculate the i value, if the basic size of sha is 45 mm 1 point
64.165
46.645
1.645
measurement traceability
repeatability
precision
Your answer
42.20 mm
140 mm
24.192 mm
19.24 mm
Error is 1 point
Given are the dimensions for the hole of size 25±0.2 mm and the size of 1 point
the sha as 24±0.1, What will be the tolerance for the hole?
0.1mm
0.2 mm
0.3 mm
0.4mm
In 35H6r5 system, which type of t is expected 1 point
clearance
interference
transition
normal
15
24
18
10
Tolerances are 1 point
unilateral
bilateral
permissible deviation
dial gauge
slip gauge
digital gauge
reed
hydraulic
pneumatic
optical
Given are the dimensions for the hole of size 25±0.2 mm and the size of 1 point
the sha as 24±0.1, What will be the tolerance for the sha ?
0.1 mm
0.2 mm
0.3mm
0.4 mm
device
mechanism
system
diameter of rollers
length of roller
If the smallest division on main scale of vernier caliper is 0.5 mm and total 1 point
number of divisions on vernier scale are 25. then the least count of the said
vernier caliper will be
0.002 mm
0.02mm
0.01mm
+/- 0.02mm
angle dekkor
optical meter
spirit level
bevel protractor
What should be the least count of the instrument , if you have to measure 1 point
dimension 20.00+/- 0.1 mm
0.1 mm
1 mm
0.01 mm
20.10 mm
If a ring gauge is designed to inspect the sha size 30+/-0.05 mm, the the 1 point
" GO" side of the gauge is generally indicated by which colour 1 point
blue
red
yellow
First shift
Second shift
part time
end
line
wavelength
Interchangeable
soft
Non-Interchangeable
What will be the measurement value with the least count 0.02mm vernier 1 point
caliper if the main scale reading is 25 mm and the vernier scale reading is
34?
25.38 mm
25.68 mm
25.006 mm
25.003 mm
wronging
wringing
sticking
Submit
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy
Forms
Forms
Online Progressive Test -2 Metrology
and Quality Control 6M505 2020- 2021
Time : 40 minutes Max. marks :20
1. Attempt any Twenty (20 ) questions of following
2. Each question carry 01 mark
3. Submit answers within 40 minutes, otherwise link will be closed.
* Required
In case of single sta thread, the axial distance moved by the screw equals 1 point
module
addendum
deddendum
pitch
Spur Gears
Helical Gears
Herringbone Gears
None of these
pitch gauge
Choral
Radial
Central
None of these
Which of the following cha s is used for monitoring the number of defects 1 point
per unit?
P-chart
C-chart
R-chart
S-chart
gear caliper
The amount by which a tooth space exceeds the thickness of an engaging 1 point
Overrun
Backlash
Mounting
None of these
durability
performance
conformance
First shift
Second shift
Part time
What will be the central limit of a Range cha , given that the mean of all 1 point
AX
D4 X
D3 X
The graph which shows whether a sample of data falls within the common 1 point
Pie chart
Control chart
Bar graph
None of these
In two wire method for thread metrology, diameter of both wires is... 1 point
same
different
The angle formed between a ank of the thread and the perpendicular to 1 point
the axis of the thread that passes through the ve ex of the fundamental
triangle is called as:
Lead
Thread angle
Flank angle
None of these
Enrollment number *
categories?
operations
finance
marketing
design engineering
Vernier Caliper
None of these
Operational Characteristics
Process Capability
Acceptance Sampling
None of these
Your answer
Internal Threading
External Threading
Internal Tapping
External Tapping
Mean
Median
Mode
All of these
Median
Variance
Mode
All of these
X-bar chart
R-chart
P-chart
All of these
Scatter plot
Line chart
Pie chart
None of these
Five samples of size 4 were taken from a process. The average of the range 1 point
value was 2.352. The average of the sample means was 19.64. Using the X-
bar cha together with an R-cha , what is the lower control limit of the X-
bar cha ?take A2 =0.729
17.923
18.276
21.004
Submit
Forms
Forms