Professional Documents
Culture Documents
Location: 1 Designation:
Fan Data
Catalogue Code: APS1004BA7/19 (APS1004BA7H040)
Description: APS Series In-Line Smoke Spill
Sound levels are quoted as in-duct values. dB(A) values are average spherical free-field for comparative use only.
As part of our continuous improvement processes, Fantech reserves the right to Printed 8/23/2019 10:13:09 AM
make changes in design or specification to products without notice.
Page 1 of 2
Represented by:
Fantech Pty. Ltd.
A.B.N. 11 005 434 024
42-62 Pound Road West
Dandenong South VIC 3175
Telephone: +61 (03) 9554 7845
Facsimile: +61 (03) 9554 7833
E-mail: info@fantech.com.au
Version 5.5.8 Copyright © 2010-17 Elta Group
Location: 1 Designation:
As part of our continuous improvement processes, Fantech reserves the right to Printed 8/23/2019 10:13:10 AM
make changes in design or specification to products without notice.
Page 2 of 2
GENERAL
CATALOGUE
Duct Mounted.qxd 4/03/2008 3:55 PM Page 31
Motors
Type - squirrel cage induction motor which can be selected to
suit virtually any specification.
Electricity supply - single or three-phase to suit a wide range of
voltages and frequencies. Inverter
Bearings - ball. Ref. L-9
See pages N-3/4 for details on motors.
Motors to meet Australian Ex e, Ex d, Ex n or D.I.P. Standards
can be fitted. SMOKE-SPILL APPLICATIONS
Internal Thermal Protection The APS Series has been tested to meet the air performance
Can be provided as an optional extra. and high temperature test requirements of Standards
AS/NZS1668.1:1998 and AS/NZS4429:1999; both tests are
Testing mandatory.
Air flow testing:- For advice on smoke-spill wiring requirements refer to the above
315-1000mm diameter - BS848:Part 1, 1980 Standards.
1250-2000mm diameter - ISO5801:1997
See page C-7 for details of the smoke-spill range available.
Noise testing all sizes to BS848:Part 2, 1985
Special Features
Suitable for a wide range of applications, ranging from handling
HOW TO ORDER
ambient filtered air to hot, toxic and noxious gases. -
Hazardous fume applications
AP Series fans can be made to accommodate requirements for AP - direct drive
APV - vertical
corrosive fume and explosion risk applications. Special coatings APS - smoke spill
and alternative materials, such as stainless steel, are available APB - belt drive
as well as increased safety motors and anti-static impellers. Our BFA - bifurcated
sales engineers are able to assist with requirements, which must Fan diameter in cm
be specified at time of quotation. Fan speed, no. of poles
Hub diameter code
Wiring Diagram A =150 D= 400
See pages M-6/7, diagrams DD 1, 2, 3, 7, 8, 9. B = 250 F = 550
C = 350 G = 255
Weights Aluminium blades, A
See pages C-112/113 to determine unit weights. GRP, P
Nylon, N
Dimensions Antistatic blades, E
See pages C-110/111 for dimensions. No. of blades
Blade pitch angle, deg.
Model Numbers
O
AP - direct-driven; 315 to 2000mm diameter
O
APV - direct-driven; 315 to 2000mm diameter
O
APS - direct-driven; 315 to 2000mm diameter
O
APB - belt driven; 315 to 2000mm diameter
O
BFA - bifurcated; 400 to 1250mm diameter
2 Pole
3000 48 rev/sec
2000
95
91
1000 88
80 92
80 92
pSF - Fan Static Pressure, Pa
600 90
71 75
78 0802
400 65 0712
70 0632
0502 0562
200 0312 65 0402
em
st s
Sy ine
L
100
60 68 71 80 78 94 95 91
0.2 0.4 0.6 1.0 2.0 4.0 6.0 10.0 20.0 30.0
qV - Volume Flow, m /s3
dB(A) @ 3m: Inlet Side =
4 Pole
2000 24 rev/sec
92
87
1000
90
600 83 85
pSF - Fan Static Pressure, Pa
Lin stem
69 78
400
es
75
Sy
73 69
68 71
68
200 65 1254 1404
64 0804 1004
63 0634 0714
0564
56 52 0504
100 51 49 0404
0314 49 55 64 67 71 73 73 78 88 93
60
0.2 0.4 0.6 1.0 2.0 4.0 6.0 10.0 20.0 40.0 60.0
qV - Volume Flow, m /s
3
dB(A) @ 3m: Inlet Side =
6 Pole
1000 96 16 rev/sec
86 90
82
600
78 95
400 88
81
Lin tem
80
pSF - Fan Static Pressure, Pa
B
es
s
72 75
Sy
200 63 67
8 Pole
600 12 rev/sec
86
400 78 82
74 77
72 74
71
Lin tem
pSF - Fan Static Pressure, Pa
71
200
es
s
Sy
63 61
10 Pole
400 10 rev/sec
81
78
78
72 75
70
200
pSF - Fan Static Pressure, Pa
60 71 75 78
50
6.0 10.0 20.0 40.0 60.0 80.0
qV - Volume Flow, m /s
3
dB(A) @ 3m: Inlet Side =