Professional Documents
Culture Documents
com
Centurion Systems (Pty) Ltd
Wiring Guide
Multi-Function Relay
Connect with us on:
facebook.com/centurionsystems
YouTube.com/centurionsystems
@askcenturion
Subscribe to the newsletter: www.centsys.com/subscribe
Call Centurion Systems (Pty) Ltd . South Africa
Head Office: +27 11 699 2400
Call Technical Support: +27 11 699 2481
Monday to Friday: from 07h00 to 18h00 (GMT+2)
Saturday: from 08h00 to 16h30 (GMT+2)
E&OE Centurion Systems (Pty) Ltd reserves the right to change
any product without prior notice
All product and brand names in this document that are accompanied by
the ® symbol are registered trademarks in South Africa and/or other
countries, in favour of Centurion Systems (Pty) Ltd, South Africa.
The CENTURION and CENTSYS logos, all product and brand names in
this document that are accompanied by the TM symbol are trademarks
of Centurion Systems (Pty) Ltd, in South Africa and other territories; all
rights are reserved.
We invite you to contact us for further details.
Doc number: 1307.D.01.0006_1
SAP code: DOC1307D06
www.centsys.com
Notes
1. Introduction 3. Wiring
The Multi-Function Relay Board, is 3.1. Wiring the M-FRB as a relay 3.3. Wiring the M-FRB as a Multi-LED Driver
an interface board that allows a
Low-Current and/or Low-Voltage Multi-function Multi-function Jumper position
output to drive a High-Voltage Relay Board Jumper position
J1 J2 J3 Relay Board J1 J2 J3
and/or a
High-Current load (3Amp @
230VAC / 28VDC Non-Inductive)
J1 J2 J3
J1 J2 J3
The M-FRB can be configured to
act as; NC NC
0V
SENS BN
SENS BL
+12V
LED IN
SENS BK
LED IN
SENS BK
0V
SENS BN
SENS BL
+12V
• An interface card for an
Inductive Sensor with a PNP or
NPN output Com / Negative
J1 J2 J3
RED LIGHT
jumper on J3.
Input Voltage NC
13.6 V NC
MAXIMUM See claws independent and
NO - + NO
direct drive manuals for
Input Voltage
10.6 V COM
Com /
COM complete wiring diagrams
MINIMUM Negative
Current 40mA
Consumption +/- 10%
- +
LED IN
SENS BK
0V
0V
SENS BL
+12V
SENS BN
SENS BL
+12V
LED IN
SENS BK
SENS BN
3A @ 230
Relay Output VAC Proximity sensor connected
to the far end of the CLAWS
Non-Inductive
Brown
3A @ 28
Black
assembly
Blue
VDC GREEN LIGHT
Open Collector
TABLE 1 12 Volt 12 Volt
FIGURE 2 FIGURE 4