Professional Documents
Culture Documents
SHELL & PAD MATERIAL: SA516-70 ALLOWABLE STRESS: Sv = 138.00 Mpa (PG-23)
Option 2 is a more conservative approach, based on PD5500 and used on software such as Autopipe Nozzle
Option 1 is a less conservative approach, based on PD5500 and used on software such as PV Elite
--------------------------------------------------------------------------
GEOMETRY DATA
MEAN CORRODED RADIUS FOR ATTACHMENT TO SHELL INTERACTION: D = (Di + ta + tp)= 1200.00 mm
MEAN CORRODED RADIUS FOR PAD TO SHELL INTERACTION: D = (Di + ta) = 1190.00 mm
--------------------------------------------------------------------------
NOZZLE ON PAD OR SHELL
d/t = 27.00 T/t = 2.000 λ = (d/D)√D/T 1.743 Vessel Ke: 1.00 Nozzle Ke: 1.00
--------------------------------------------------------------------------
SHEAR STRESSES:
(5) nr = (NrT/P) 0.085 MEMBRANE: 1.06 Mpa σr = σα = P / t² ( t / πd ) (+/-) P / t ² ( 6mr - 3nr ) (equation
(5) mr = (Mr/P) 0.089 BENDING: 25.11 Mpa 5, membrane +/- bending components)
σr (Mpa) σθ (Mpa)
Load Part Equation Equation
Membrane Bending Total Membrane Bending Total
σr (Mpa) σθ (Mpa)
Load Part Equation Equation
Membrane Bending Total Membrane Bending Total
CIRCUMFERENTIAL STRESSES:
0 90 180 270
Stress due to:
Inside Outside Inside Outside Inside Outside Inside Outside
Primary membrane σθ = 13.16 13.16 4.70 4.70 -6.19 -6.19 2.27 2.27
From pressure: σθ,p = 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00
σpθ,m = σθ + σθ,p = 103.16 103.16 94.70 94.70 83.81 83.81 92.27 92.27
Local bending σθ,b = -23.98 23.98 -12.92 12.92 9.67 -9.67 -1.39 1.39
Total σθ,m = σpθ,m + σθ,b 79.18 127.14 81.78 107.62 93.48 74.14 90.88 93.66
LONGITUDINAL STRESSES:
0 90 180 270
Stress due to:
Inside Outside Inside Outside Inside Outside Inside Outside
Primary membrane σr = 4.65 4.65 2.78 2.78 -0.82 -0.82 1.05 1.05
From pressure: σr,p = 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00
σpr,m = σr + σr,p = 49.65 49.65 47.78 47.78 44.18 44.18 46.05 46.05
Local bending σr,b = -38.73 38.73 -20.57 20.57 14.70 -14.70 -3.46 3.46
Total σr,m = σpr,m + σr,b 10.92 88.37 27.20 68.35 58.88 29.48 42.59 49.50
SHEAR STRESSES:
0 90 180 270
Stress due to:
Inside Outside Inside Outside Inside Outside Inside Outside
Total shear τ = -0.41 -0.41 1.72 1.72 1.72 1.72 -0.41 -0.41
--------------------------------------------------------------------------
CLASSIC WRC & AS PER BS5500
Max Stress intensity formula 79.18 127.15 81.84 107.70 93.57 74.21 90.88 93.67
Max Stress intensity formula 10.92 88.37 27.15 68.28 58.79 29.41 42.59 49.50
Max Stress intensity formula 68.27 38.78 54.69 39.42 34.78 44.79 48.30 44.17
Maximum stress intensity: 79.18 127.15 81.84 107.70 93.57 74.21 90.88 93.67
Buckling stress σbkθ = σθ + 0.00 0.00 0.00 0.00 3.48 -15.86 0.00 0.00
Buckling stress σbkr = σr + σ 0.00 0.00 0.00 0.00 13.88 -15.52 0.00 0.00
Max Stress intensity formula 23.98 38.73 12.92 20.57 14.70 9.67 1.39 3.46
Max Stress intensity formula 38.73 23.98 20.57 12.92 9.67 14.70 3.46 1.39
Max Stress intensity formula 14.75 14.75 7.65 7.65 5.03 5.03 2.07 2.07
Maximum stress intensity: 38.73 38.73 20.57 20.57 14.70 14.70 3.46 3.46
Membrane stress intensity 1 103.17 103.17 94.77 94.77 83.89 83.89 92.28 92.28
Membrane stress intensity 2 49.64 49.64 47.72 47.72 44.10 44.10 46.04 46.04
Membrane stress intensity 3 53.52 53.52 47.05 47.05 39.78 39.78 46.23 46.23
Maximum stress intensity: 103.17 103.17 94.77 94.77 83.89 83.89 92.28 92.28
Max stress intensity: 103.17 Check < 1.5f (NO CHECK IN PD5500 IF THERE IS NO PAD)
--------------------------------------------------------------------------
FOR ASME VIII DIV.1 & DIV.2:
Circumferential Pm = σθ,p 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00
Circumferential Q = σθ,b -23.98 23.98 -12.92 12.92 9.67 -9.67 -1.39 1.39
Longitudinal Pm = σr,p 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00
Longitudinal Q = σr,b -38.73 38.73 -20.57 20.57 14.70 -14.70 -3.46 3.46
Shear Pl = τ(Fc) + τ(Fl) -1.06 -1.06 1.06 1.06 1.06 1.06 -1.06 -1.06
Shear Q = τ(Mt) 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65
Membrane stress intensity 1 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00
Membrane stress intensity 2 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00
Membrane stress intensity 3 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00
Membrane stress intensity 1 103.18 103.18 94.73 94.73 83.84 83.84 92.30 92.30
Membrane stress intensity 2 49.63 49.63 47.75 47.75 44.15 44.15 46.02 46.02
Membrane stress intensity 3 53.56 53.56 46.97 46.97 39.69 39.69 46.27 46.27
PRIMARY GENERAL MEMBRANE + PRIMARY LOCAL STRESS INTENSITY (Pm + Pl) + SECONDARY MEMBRANE AND BENDING (Q)
Membrane stress intensity 1 79.18 127.15 81.84 107.70 93.57 74.21 90.88 93.67
Membrane stress intensity 2 10.92 88.37 27.15 68.28 58.79 29.41 42.59 49.50
Membrane stress intensity 3 68.27 38.78 54.69 39.42 34.78 44.79 48.30 44.17
Max Pm 90.00 < S,all Max Pm + Pl 103.18 < 1.5 S,all Max Pm + Pl + Q 127.15 < 3 S,all
--------------------------------------------------------------------------
CHECK OF NOZZLE AT JUNCTION:
CIRCUMFERENTIAL STRESSES:
0 90 180 270
Stress due to:
Inside Outside Inside Outside Inside Outside Inside Outside
Primary membrane σθ = 13.16 13.16 4.70 4.70 -6.19 -6.19 2.27 2.27
From pressure: σθ,p = 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00
σpθ,m = σθ + σθ,p = 103.16 103.16 94.70 94.70 83.81 83.81 92.27 92.27
Local bending σθ,b = 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Total σθ,m = σpθ,m + σθ,b 103.16 103.16 94.70 94.70 83.81 83.81 92.27 92.27
LONGITUDINAL STRESSES:
0 90 180 270
Stress due to:
Inside Outside Inside Outside Inside Outside Inside Outside
Primary membrane σr = 7.67 7.67 2.43 2.43 -5.55 -5.55 -0.31 -0.31
From pressure: σr,p = 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00
σpr,m = σr + σr,p = 52.67 52.67 47.43 47.43 39.45 39.45 44.69 44.69
Local bending σr,b = -99.15 99.15 -48.95 48.95 48.93 -48.93 -1.27 1.27
Total σr,m = σpr,m + σr,b -46.47 151.82 -1.52 96.39 88.38 -9.48 43.42 45.96
SHEAR STRESSES:
0 90 180 270
Stress due to:
Inside Outside Inside Outside Inside Outside Inside Outside
Total shear τ = -0.81 -0.81 3.43 3.43 3.43 3.43 -0.81 -0.81
--------------------------------------------------------------------------
CLASSIC WRC & AS PER BS5500
Max Stress intensity formula 103.17 151.83 94.83 99.08 90.22 83.94 92.29 92.29
Max Stress intensity formula 46.48 103.15 1.64 92.01 81.97 9.60 43.41 45.94
Max Stress intensity formula 149.65 48.69 96.47 7.07 8.24 93.54 48.88 46.34
Maximum stress intensity: 149.65 151.83 96.47 99.08 90.22 93.54 92.29 92.29
Buckling stress σbkθ = σθ + 0.00 0.00 0.00 0.00 -6.19 -6.19 0.00 0.00
Buckling stress σbkr = σr + σ 0.00 0.00 0.00 0.00 43.38 -54.48 -1.58 0.96
Max Stress intensity formula 0.00 99.15 0.00 48.95 48.93 0.00 0.00 1.27
Max Stress intensity formula 99.15 0.00 48.95 0.00 0.00 48.93 1.27 0.00
Max Stress intensity formula 99.15 99.15 48.95 48.95 48.93 48.93 1.27 1.27
Maximum stress intensity: 99.15 99.15 48.95 48.95 48.93 48.93 1.27 1.27
Membrane stress intensity 1 103.18 103.18 94.95 94.95 84.08 84.08 92.29 92.29
Membrane stress intensity 2 52.66 52.66 47.19 47.19 39.18 39.18 44.67 44.67
Membrane stress intensity 3 50.52 50.52 47.76 47.76 44.89 44.89 47.61 47.61
Maximum stress intensity: 103.18 103.18 94.95 94.95 84.08 84.08 92.29 92.29
Max stress intensity: 103.18 Check < 1.5f (NO CHECK IN PD5500 IF THERE IS NO PAD)
--------------------------------------------------------------------------
FOR ASME VIII DIV.1 & DIV.2:
Circumferential Pm = σθ,p 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00
Circumferential Q = σθ,b 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
Longitudinal Pm = σr,p 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00
Longitudinal Q = σr,b -99.15 99.15 -48.95 48.95 48.93 -48.93 -1.27 1.27
Shear Pl = τ(Fc) + τ(Fl) -2.12 -2.12 2.12 2.12 2.12 2.12 -2.12 -2.12
Shear Q = τ(Mt) 1.31 1.31 1.31 1.31 1.31 1.31 1.31 1.31
Membrane stress intensity 1 90.00 90.00 90.00 90.00 90.00 90.00 90.00 90.00
Membrane stress intensity 2 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00
Membrane stress intensity 3 45.00 45.00 45.00 45.00 45.00 45.00 45.00 45.00
Membrane stress intensity 1 103.25 103.25 94.80 94.80 83.91 83.91 92.37 92.37
Membrane stress intensity 2 52.58 52.58 47.34 47.34 39.35 39.35 44.59 44.59
Membrane stress intensity 3 50.67 50.67 47.46 47.46 44.57 44.57 47.77 47.77
PRIMARY GENERAL MEMBRANE + PRIMARY LOCAL STRESS INTENSITY (Pm + Pl) + SECONDARY MEMBRANE AND BENDING (Q)
Membrane stress intensity 1 103.17 151.83 94.83 99.08 90.22 83.94 92.29 92.29
Membrane stress intensity 2 46.48 103.15 1.64 92.01 81.97 9.60 43.41 45.94
Membrane stress intensity 3 149.65 48.69 96.47 7.07 8.24 93.54 48.88 46.34
Max Pm 90.00 < S,all Max Pm + Pl 103.25 < 1.5 S,all Max Pm + Pl + Q 151.83 < 3 S,all
--------------------------------------------------------------------------