Professional Documents
Culture Documents
polytank
engineering in plastic
group
2 polytank group engineering in plastic
polytank
engineering in plastic
POLYTANK GROUP create products that provide solutions and
Only the finest go one step further than many other rotational moulders.
Rotational moulding large items has never been easy. Looking to the future
POLYTANK have mastered the technique over the
POLYTANK products are the single most recognized
past 35 years and now produce a range of products
brand for cold water storage in the UK. This
that are recognized throughout the industry as the
recognition is based on quality and innovation and
finest available.
provides a solid base for the development of new
When you add the innovation of including installation products such as POLYTANKRED, as the company
kits with the tank they simply make common sense. looks to the future.
POLYTANK have been manufacturing and supplying The development of a Contract Division utilises all the
plumbing equipment for over 35 years and the last groups skills in rotational moulding. This now offers
10 years has seen rapid and sustained progress of manufacturing facilities, on contract, for some of the
Only the finest raw materials
the company. leading names in the UK and Europe, manufacturing
pass the POLYTANK ‘goods Polytank now has a 15 acre site at Freckleton on the high quality products for them to retail or use.
The start of the process where raw materials are ground to meet the
POLYTANK standard before being conveyed to the rotational moulding
manufacturing units. This machine has been installed to POLYTANK’s
specification to guarantee a constant in the processing of the raw
polymers for moulding into larger items. This ensures total consistency
of each finished product.
polytank group engineering in plastic 3
many benefits. The main benefit is the fact that as the POLYTANKRED is a fully
tank is manufactured vertically sided it is no more than
poly tank red ®
Straight sided also means they can be stored easily so A typical POLYTANK Group product
they can be nested up to 20 high and can be easily
poly bin ®
density polyethylene.
This heavy duty multi purpose mixing bath
is ideal for sand and cement, artex and
plaster, soil and compost, weeding
and potting, painting and rolling.
why polytank
Innovation has made a significant difference to the cost
effectiveness of plumbers and installers throughout the UK.
All rectangular POLYTANK systems in the marketplace today. With the ever-
increasing installation problems of redesigned roof
products come complete with
spaces and loft hatches POLYTANK has the answer
the PT kit inside the tank.
for any plumber or installer.
Security is also All POLYTANK’s are manufactured within ISO
POLYTANK is the
polycistern ™
Kits poly tank ®
Kits
the products.
PT2/B Kit
Consists of:
• Snap on lid
• POLYTANK Byelaw 30 kit and fitting
instructions
• Insultation and ties
PT2/C Kit
Consists of:
• Snap on Polylid
nqa • POLYTANK Byelaw 30 kit and fitting
ISO 9001 UKAS instructions
Quality
R egistered Management
015 • 1/2” BS1212 Part 2 ball valve and 41/2” float
2004
• 22mm compression tank connector
• 15mm x 1/2” angled service valve.
6 polytank group engineering in plastic
ACTUAL CAPACITY Litres Gallons ACTUAL CAPACITY Litres Gallons MAX. DIMENSIONS
Minimum to waterline 190 42 Minimum to waterline 182 40 Before fixing
mm Inches
MAX. DIMENSIONS mm Inches MAX. DIMENSIONS mm Inches
Before fixing LENGTH 1020 39 Before fixing LENGTH 590 23 DIAMETER 690 26
WIDTH 500 20 WIDTH 590 23 HEIGHT 575 23
550 21 711 28
HEIGHT HEIGHT
227 Litres 50 Gallons
ORDER CODE 46-19-19 227 Litres 50 Gallons ORDER CODE 50 gall circular
ACTUAL CAPACITY Litres Gallons
Minimum to waterline 190 42
ORDER CODE 23-23-35 MAX. DIMENSIONS
Before fixing
ACTUAL CAPACITY Litres Gallons
MAX. DIMENSIONS mm Inches
Minimum to waterline 227 50 mm Inches
mm Inches
HEIGHT 500 19 ACTUAL CAPACITY Litres Gallons
Minimum to waterline 204 45 LENGTH 480 18
ORDER CODE 36-24-23 WIDTH 250 12
MAX. DIMENSIONS mm Inches
HEIGHT 320 12
ACTUAL CAPACITY Litres Gallons Before fixing LENGTH 590 23
Minimum to waterline 227 50 WIDTH 590 23
MAX. DIMENSIONS mm Inches HEIGHT 870 34 Poly A30 COMES COMPLETE WITH:
Before fixing LENGTH 925 36 EXTENDED BALLVALVE ARM, FIXING SCREWS, INSULATION, SEAL
WIDTH 600 24
HEIGHT 570 23 ORDER CODE XPA30
ACTUAL CAPACITY
ORDER CODE 64-18-19 PT2 Polytank loft-tank “Coffin”
COMES COMPLETE WITH PT2 PACKAGE Type A air gap chamber
ACTUAL CAPACITY Litres Gallons
Minimum to waterline 227 50 114 Litres 25 Gallons MAX. DIMENSIONS
Before fixing
MAX. DIMENSIONS mm Inches
WIDTH
1650
460
64
24 ACTUAL CAPACITY Litres Gallons
Fittings Kits
Minimum to waterline 227 50 Rectangular
HEIGHT 475 19 PT2 Package Polytanks
MAX. DIMENSIONS mm Inches
• Snap on Polylid
454 Litres 100 Gallons Before fixing LENGTH 1650 64 • POLYTANK Byelaw 30 kit and fitting instructions
WIDTH 460 18 • / ” BS1212 Part 2 ball valve and 4 / ” float
1 2 1 2
POLYCISTERN products
POLYCISTERN is part of the POLYTANK GROUP range of
are manufactured within
products, which have all been tested and approved to
ISO 9001:2000 approved ensure full compliance with water regulations.
All POLYCISTERN products are manufactured to
factories under controlled PT2/D KIT
BS4213:2004 and are kite marked. Those selling, fitting
conditions and tested to and using POLYCISTERN can be assured that the
• POLYCISTERN Byelaw 30 kit and fitting instructions
product meets the latest demands of the industry.
• POLYCISTERN click fit strap(s)
meet exacting standards. POLYCISTERN is typical of the innovation from All of this kit
• POLYCISTERN lid is included
POLYTANK where all the components are packed inside
in the price
POLYCISTERNs are WRAS • POLYCISTERN insulation.
the product and are secure from being lost during
handling and delivery by the lid. This all-inclusive
approved and kitemarked
approach saves handling, counting and storage.
Remove lid from cistern
to BS4213:2004 POLYCISTERN meets all mandatory Water Supplies
and tighten screwed
(Water Fittings) Regulations 1999.
breather and screwed
vent pipe sleeve
POLYCISTERN
COMES COMPLETE WITH PT2/D KIT
MAX. DIMENSIONS mm Inches WEIGHT 45kg MAX. DIMENSIONS mm Inches WEIGHT 50kg MAX. DIMENSIONS mm Inches WEIGHT 107kg
LENGTH 1250 50 LENGTH 1800 72 LENGTH 1410 56
WIDTH 1250 50 CAPACITY Litres Gallons WIDTH 1240 50 CAPACITY Litres Gallons
WIDTH 1410 56 CAPACITY Litres Gallons
HEIGHT 1280 51 1340 295 HEIGHT 900 36 1200 260 HEIGHT 1500 60 1340 295
ORDER CODE 1360V OFCERT NO 0674060304 ORDER CODE LP1230 OFCERT NO 0668060207 ORDER CODE VB2455 OFCERT NO 0668060211
MAX. DIMENSIONS mm Inches WEIGHT 45kg MAX. DIMENSIONS mm Inches WEIGHT 55kg MAX. DIMENSIONS mm Inches WEIGHT 162kg
LENGTH 1240 50 LENGTH 1900 76 LENGTH 1700 68
WIDTH 1240 50 CAPACITY Litres Gallons WIDTH 1240 50 CAPACITY Litres Gallons WIDTH 1700 68 CAPACITY Litres Gallons
HEIGHT 1400 56 1300 300 HEIGHT 860 34 1230 270 HEIGHT 1810 72 2455 540
ORDER CODE V2455 OFCERT NO 0668040204 ORDER CODE 5000VB OFCERT NO 0668060212
MAX. DIMENSIONS mm Inches WEIGHT 70kg MAX. DIMENSIONS mm Inches WEIGHT 282kg
LENGTH 1510 60 LENGTH 2120 85
WIDTH
HEIGHT
1510 60
1500 60
CAPACITY Litres
2455 540
Gallons
SINGLE SKIN WIDTH
HEIGHT
2120 85
2300 92
CAPACITY Litres
5000 1100
Gallons
components you need built in. improved figures of heat retention over all other
methods of insulation.
Just connect up and add water!
All required components are fitted in POLYTANKRED
so there is no requirement to assemble. The installer
has no need to drill and to clear up the mess made by
drilling. There is no measuring required and overall
POLYTANKRED can be installed in virtually no time.
Polytank Red
18 Litres 4 Gallons
ORDER CODE RED4
ACTUAL CAPACITY Litres Gallons
Minimum to waterline 18 4
MAX. DIMENSIONS mm Inches
WEIGHT kg
EMPTY 6.4
FULL 24.4
polytank group engineering in plastic 11
polytank
contract rotational moulders
contracts
As the POLYTANK product range penetrated more and POLYTANK’s specialisation in large product rotational
more of the UK marketplace, other manufacturers moulding has meant that many household names can
recognised the quality of the group’s rotational develop products which would previously have been
moulding capabilities and turned to POLYTANK to not cost effective or not of sufficient quality to
make products for them. manufacture using the rotational moulding method.
Slowly the POLYTANK Contract Division was The new Contract Division is making a variety of
developed to meet this demand and two new Alan technical mouldings to meet the demands of the
Yorke rotational moulding machines have recently market place.
been installed to cope with this
growing Contract Division.
A typical product
produced by the
Contract Division.
This new Contract Division is also part of the POLYTANK GROUP mindset of flexible
deliveries and shorter lead times, still with guaranteed quality, giving many potential
customers the ability to meet their own market demands with this level of flexibility and
quality. All Contract products are confidential so all we can show in this brochure is detail
of some of these products so the quality can be recognized.
The POLYTANK Group now operate a fleet of
vehicles from their base on the outskirts of
Preston. This fleet is a key part of the flexibility
within POLYTANK logistics to meet tight
deadlines on product delivery.
The size of the manufacturing operation means
they can meet large orders in relatively short
lead time.
Their commitment to expanding the groups
turnover by 100% in the next 3-4 years means
that the flexibility, quality, service and attention to
details has to maintain at its highest in order to
retain customer loyalty and attract new potential.
This same commitment to the Contract Division
will also ensure its growth as one of the elements
geared to meeting this company objective.
polytank
engineering in plastic
group