This technical data sheet provides typical physical, mechanical, thermal, electrical, and printed specimen condition properties of a 3D printing filament made of 90% polylactic acid (PLA) and 10% carbon fiber. Key properties include a density of 1.29 g/cc, a tensile strength of 48 MPa, a glass transition temperature of 60°C, and a surface resistance greater than 109 Ohm/sq when printed with specified parameters on an open source FDM/FFF printer.
This technical data sheet provides typical physical, mechanical, thermal, electrical, and printed specimen condition properties of a 3D printing filament made of 90% polylactic acid (PLA) and 10% carbon fiber. Key properties include a density of 1.29 g/cc, a tensile strength of 48 MPa, a glass transition temperature of 60°C, and a surface resistance greater than 109 Ohm/sq when printed with specified parameters on an open source FDM/FFF printer.
This technical data sheet provides typical physical, mechanical, thermal, electrical, and printed specimen condition properties of a 3D printing filament made of 90% polylactic acid (PLA) and 10% carbon fiber. Key properties include a density of 1.29 g/cc, a tensile strength of 48 MPa, a glass transition temperature of 60°C, and a surface resistance greater than 109 Ohm/sq when printed with specified parameters on an open source FDM/FFF printer.