Professional Documents
Culture Documents
com
BD Pyxis™ MedStation™ ES
Configure a storage space
Configuring a storage space allows you to set up a device to accommodate facility needs. You may
need to change the number of pockets in a drawer, replace BD Pyxis™ CUBIE pockets or add a
remote stock location for items managed by, but not stored in, the device.
Note: Depending upon your permissions, you may need to select More, then select Storage Space
Configuration.
Select the device containing the drawer you’d like to configure, then select Drawer Settings.
The device drawers are listed in the center column. Select the Matrix drawer you’d like to
configure.
Enter the number of pockets you’d like to set up in the Number of Pockets field. Select the
Has Internal Return Bin checkbox if applicable.
Select Open.
The drawer you selected pops open. Configure the pocket dividers as required to match the
number of pockets indicated.
Once the dividers are configured properly, select Accept.
The system will confirm that the configuration has been saved. Select Done and close the
drawer.
© 2017 BD. BD, the BD Logo and all other trademarks are property of Becton, Dickinson and Company.
1
bd.com
Note: Depending upon your permissions, you may need to select More, then select Storage Space
Configuration.
Select the device containing the drawer you’d like to configure, then select Assign Drawers.
On the device diagram, select the drawer containing the BD Pyxis CUBIE pocket you’d like to
configure or replace, then select Drawer Settings.
Select the pocket you’d like to configure or replace on the diagram. Pocket A5 is being
selected in the image below.
© 2017 BD. BD, the BD Logo and all other trademarks are property of Becton, Dickinson and Company.
2
bd.com
Note: A description of the type of drawer appears at the top of the screen. If you are configuring a BD
Pyxis™ Half-Height CUBIE pocket, the display indicates if the drawer is the top or bottom drawer. Refer to
the legend at the bottom of the screen to determine the status of the pockets.
Select Open.
The drawer containing the selected BD Pyxis CUBIE pocket opens up.
Select Release.
The selected BD Pyxis CUBIE pocket will be released from the drawer.
Continue selecting, releasing and replacing BD Pyxis CUBIE pockets as needed.
Once you’ve configured the BD Pyxis CUBIE pockets, select Done and close the drawer.
Note: Depending upon your permissions, you may need to select More, then select Storage Space
Configuration.
© 2017 BD. BD, the BD Logo and all other trademarks are property of Becton, Dickinson and Company.
3
bd.com
Enter the number of pockets in the remote stock location (1-99) in the Number of Pockets
field.
Select Accept.
© 2017 BD. BD, the BD Logo and all other trademarks are property of Becton, Dickinson and Company.
4